—$29.95

Elite Pro Grips are engineered to provide more padding where you need it most without the bulky feel - so you can enjoy the ride longer. Single clamp design Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike. Item Specifications Color Black Defined Color Black Flange No Grip Shift Specific No Length 130 Lock On Yes Shape Round ODI Elite Pro Grip UPC: 711484180668

by ODI

—$159.50

ONEUP CARBON BARS. Strong, lightweight & vertically compliant. The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let you ride harder for longer. The solution is OneUp's patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone. We bench marked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains. Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right. Specs: Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up Weight: 20mm Rise (220g) 35mm Rise (225g) Colour: Black. Decal kits: Available here in Red, Green, Blue, Orange, Purple & White OneUp Carbon Handlebar Flat/Riser Handlebar EAN: 0033562821943

by OneUp

—$24

The PNW Loam grips are a great option to spice up your cockpit. PNW has designed the Loam grips with comfort in mind. They have strategically shaped the grips so that there's padding where it counts for trail vibration while keeping the ends thinner for a better grip feel. The grip pattern has also been laid out so that you're getting the proper grip you need while ensuring a smooth and soft ride. You're sure to be a happy camper picking up a set of these Loam grips!   We can’t promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter. The Loam Grip features two contrasting patterns and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip’s surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design helps combat compound deterioration, ensures the grip is absorbing more vibration and provides needed structure to support the additional body weight pressing down on this crucial contact point. The pattern isn’t the only thing designed to keep your hands happy. The Loam Grip was purpose built for the demands of Enduro/Trail riding, and developing the right compound for this was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. After testing many different blends, we picked one that we call the “happy camper” composite, because it strikes a balance between an ultra soft material that wears too quickly and a harder compound that provides no tactile benefits.   Item Specifications Diameter 31mm inside - 29.5mm outside Width 133.5mm Clamp Standard 22.2 single clamp PNW Loam Grip UPC: 850005672456

by PNW

—$34.95

The All-Mountain/Gravity Grip with excellent grip and a super soft UV-stable rubber compound. The GA3 combines pressure relief with a high degree of freedom. Super soft rubber compound for outstanding grip, made in Germany Customized medium grip zone Increased contact face for optimised hand position prevents aches Item Specifications Color Black Defined Color Black Flange No Grip Shift Specific No Lock On Yes Shape Ergo Weight 115 Ergon GA3 Grips Grip EAN: 4260477066114

by Ergon

—$159.50

ONEUP CARBON BARS. Strong, lightweight & vertically compliant. The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let you ride harder for longer. The solution is OneUp's patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone. We bench marked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains. Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right. Specs: Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up Weight: 20mm Rise (220g) 35mm Rise (225g) Colour: Black. Decal kits: Available here in Red, Green, Blue, Orange, Purple & White OneUp Carbon Handlebar Flat/Riser Handlebar EAN: 0033462821944

by OneUp

—$24

The PNW Loam grips are a great option to spice up your cockpit. PNW has designed the Loam grips with comfort in mind. They have strategically shaped the grips so that there's padding where it counts for trail vibration while keeping the ends thinner for a better grip feel. The grip pattern has also been laid out so that you're getting the proper grip you need while ensuring a smooth and soft ride. You're sure to be a happy camper picking up a set of these Loam grips!   We can’t promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter. The Loam Grip features two contrasting patterns and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip’s surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design helps combat compound deterioration, ensures the grip is absorbing more vibration and provides needed structure to support the additional body weight pressing down on this crucial contact point. The pattern isn’t the only thing designed to keep your hands happy. The Loam Grip was purpose built for the demands of Enduro/Trail riding, and developing the right compound for this was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. After testing many different blends, we picked one that we call the “happy camper” composite, because it strikes a balance between an ultra soft material that wears too quickly and a harder compound that provides no tactile benefits.   Item Specifications Diameter 31mm inside - 29.5mm outside Width 133.5mm Clamp Standard 22.2 single clamp PNW Loam Grip UPC: 850005672463

by PNW

—$24

The PNW Loam grips are a great option to spice up your cockpit. PNW has designed the Loam grips with comfort in mind. They have strategically shaped the grips so that there's padding where it counts for trail vibration while keeping the ends thinner for a better grip feel. The grip pattern has also been laid out so that you're getting the proper grip you need while ensuring a smooth and soft ride. You're sure to be a happy camper picking up a set of these Loam grips!   We can’t promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter. The Loam Grip features two contrasting patterns and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip’s surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design helps combat compound deterioration, ensures the grip is absorbing more vibration and provides needed structure to support the additional body weight pressing down on this crucial contact point. The pattern isn’t the only thing designed to keep your hands happy. The Loam Grip was purpose built for the demands of Enduro/Trail riding, and developing the right compound for this was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. After testing many different blends, we picked one that we call the “happy camper” composite, because it strikes a balance between an ultra soft material that wears too quickly and a harder compound that provides no tactile benefits.   Item Specifications Diameter 31mm inside - 29.5mm outside Width 133.5mm Clamp Standard 22.2 single clamp PNW Loam Grip UPC: 850005672487

by PNW

—$27

The Hell’s Gate grip has a unique design that both adds comfort and traction to your hand while riding. The knurled pattern meets large pads of rubber that are intended to go into your palm, helping create more padding that better fits the shape of your hand. On the bottom side there are the traction bars, these raised bars that run lengthwise on the grip to help your finger tips grip and give you the confidence to ride your hardest. The grip is secured by a single clamp thanks to our tapered tube, it's strong enough to not slip under the hardest of riding. For every pair of Hells Gate grips sold, we will donate $1 to Hells Gate National Park in Kenya.We exist to support the trails we love, the people that take care of them and to make your riding experience exceptional. To See the official Trail One website Click Here! See this product on the Trail One Site Here! Don't forget to check out the Trail One philanthropy projects at trailone.bike/projects Designed in Ireland Made in Taiwan Material: Synthetic rubber on grip surface, GFRP core, 6061-T aluminum on lockring Length: 132 mm Main body diameter: 32 mm Hardness sA: A20 Riding a bike through Hell's Gate National Park in Kenya is a truly wild experience. It's common to spot baboons, warthogs, giraffes and zebras in their natural habitat. I'll never forget seeing a giraffe run. It's a bizarre and beautiful thing that somehow happens in slow motion. After a nice little mosey through the park, we dropped into a bone-rattling descent high above Lake Naivasha where I was hanging on for dear life. It was white-knuckle action all the way down. It's the kind of stuff our Hell's Gate Grips are made for, hold on tight and try to enjoy! -Brian Kennedy Trail One Components Hell's Gate Grip UPC: 850022403002

by Trail One Components

—$29.95

GA2 with extra thick circumference. Specifically for riders with large hands or high demands for damping. The ergonomic optimized form, allows reduced force while gripping, because the grip zones are matched to the hand. The inner construction varies in thickness allowing greater damping. The GA2 Fat has a superb tactile feel The super soft, UV-stable rubber compound is exclusively manufactured in Germany for Ergon. This allows greater control even on demanding trails. The inboard clamp allows even more gripping area at the end of the bars, it is completely secure and carbon bar friendly. With replaceable endplug. Gravity control rubber material Extra thick gripping range Item Specifications Color Black Defined Color Black Flange No Grip Shift Specific No Length 136 Lock On Yes Shape Round Weight 135 Ergon GA2 Fat Grips Grip EAN: 4260477066084

by Ergon

—$44.95

The evolution of the successful GE1. The new rider-oriented, ergonomic grip for wide riser bars. Thanks to the feedback collected from countless riders of the Enduro World Series, the Ergon design team succeeded in further improving the popular GE1 in certain details. Surface texture is now even more slip-proof and the rubber compound softer, lending constant precise grip. It actively supports the correct torso/forearm position during downhill riding by rotating the grip area towards the steering axle by 8 % the elbows are automatically outwardly raised. Forged inner clamp, fully integrated grip end connected to the inner core this establishes a soft, damping grip edge, and your hand can grip right at the outer edge. Pressure is diminished from the sensitive ulnar nerve, which is located on the outside hand. Compatible with carbon handlebars. Maximum hand grip is assured with use of silicone-based rubber compounds Texture orientation which is opposite the rotation of the hand Damping inner core construction Item Specifications Color Stealth/Oil Slick Defined Color Black Flange No Grip Shift Specific No Length 135 Lock On Yes Shape Round Weight 105 Ergon GE1 Evo Factory Grips Grip EAN: 4260477069085

by Ergon

—$24

The PNW Loam grips are a great option to spice up your cockpit. PNW has designed the Loam grips with comfort in mind. They have strategically shaped the grips so that there's padding where it counts for trail vibration while keeping the ends thinner for a better grip feel. The grip pattern has also been laid out so that you're getting the proper grip you need while ensuring a smooth and soft ride. You're sure to be a happy camper picking up a set of these Loam grips!   We can’t promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter. The Loam Grip features two contrasting patterns and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip’s surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design helps combat compound deterioration, ensures the grip is absorbing more vibration and provides needed structure to support the additional body weight pressing down on this crucial contact point. The pattern isn’t the only thing designed to keep your hands happy. The Loam Grip was purpose built for the demands of Enduro/Trail riding, and developing the right compound for this was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. After testing many different blends, we picked one that we call the “happy camper” composite, because it strikes a balance between an ultra soft material that wears too quickly and a harder compound that provides no tactile benefits.   Item Specifications Diameter 31mm inside - 29.5mm outside Width 133.5mm Clamp Standard 22.2 single clamp PNW Loam Grip UPC: 850005672470

by PNW

—$34.95

The All-Mountain/Gravity Grip with excellent grip and a super soft UV-stable rubber compound. The GA3 combines pressure relief with a high degree of freedom. Super soft rubber compound for outstanding grip, made in Germany Customized medium grip zone Increased contact face for optimised hand position prevents aches Item Specifications Color Black Defined Color Black Flange No Grip Shift Specific No Length 136 Lock On Yes Shape Ergo Weight 115 Ergon GA3 Grips Grip EAN: 4260477068729

by Ergon

—$54.99

The Race Face Chester handlebar is a budget-friendly alloy option designed for the rowdiest riding. Intended for Enduro, Downhill and Freeride applications. Shot-peened to increase fatigue resistance Cold-drawn and seamless 6061 aluminum 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance Item Specifications Color Black Width 780 Bar Clamp Diameter 35.0 Material Aluminum Defined Color Black Rise 35 RaceFace Chester Flat/Riser Handlebar UPC: 821973281292

by RaceFace

—$23.99

This collaboration between Brendan "Brendog" Fairclough and DMR brings an offering that marries some classic grip features to work for the demands of anything from all mountain to downhill riding. Single Krayton rubber Flange side mushroom pattern for comfort Tapered core - no need for outer lock ring Combination of waffle and knurl patterns for increased grip Soft compound Item Specifications Color Black Weight 120 Genre 140 Defined Color Black Shape Round Lock On Yes Flange Yes Grip Shift Specific No Grip Diameter 31.3mm DMR DeathGrip Flanged Grips Grip EAN: 5055308113582

by DMR

—$23.99

This collaboration between Brendan "Brendog" Fairclough and DMR brings an offering that marries some classic grip features to work for the demands of anything from all mountain to downhill riding. Single Krayton rubber Flange side mushroom pattern for comfort Tapered core - no need for outer lock ring Combination of waffle and knurl patterns for increased grip Item Specifications Color Black Defined Color Black Shape Round Lock On Yes Flange No Grip Diameter 31.3mm DMR DeathGrip Flangeless Grips Grip EAN: 5055308116897

by DMR

—$32.95

The Rogue grips feature soft, large raised pads to provide extra shock absorption. Bonus pack includes grips, Lock Jaws and Snap Caps Large Pad Design for ultimate shock absorbtion Dual lock-on clamp design 33.5MM Large Diameter Item Specifications Color Black Defined Color Black Flange No Grip Shift Specific No Length 130 Lock On Yes Shape Round ODI Rogue Lock-On Grips Grip UPC: 711484103575

by ODI

—$23.99

This collaboration between Brendan "Brendog" Fairclough and DMR brings an offering that marries some classic grip features to work for the demands of anything from all mountain to downhill riding. Single Krayton rubber Flange side mushroom pattern for comfort Tapered core - no need for outer lock ring Combination of waffle and knurl patterns for increased grip Soft compound Item Specifications Color Camo Weight 120 Genre 140 Defined Color Multi-Color Shape Round Lock On Yes Flange Yes Grip Shift Specific No Grip Diameter 31.3mm DMR DeathGrip Flanged Grips Grip EAN: 5055308113605

by DMR

—$19.99

ESI Chunky Grips are best for twist shifters and for maximum shock absorption. Install and remove with rubbing alcohol Silicone construction conforms to the hand and absorbs shock Item Specifications Color Black Unit of Sale Pair Weight 60g Length 130mm Flange No Defined Color Black ESI Chunky Grips Grip UPC: 181517000032

by ESI

—$26.95

Fat Paw grips were developed for riders who crave large-diameter grips that also have a soft feel. The 9.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands. 36mm installed diameter, 9mm thick foam 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability Tacky texture provides excellent grip with or without gloves in all weather conditions Includes bar end plugs Item Specifications Color Black Defined Color Black Flange No Grip Shift Specific No keyword search Quantity Break Length 135 Lock On No Shape Round Weight 110 Wolf Tooth Fat Paw Grips Grip UPC: 812719022491

by Wolf Tooth

—$24

The PNW Loam grips are a great option to spice up your cockpit. PNW has designed the Loam grips with comfort in mind. They have strategically shaped the grips so that there's padding where it counts for trail vibration while keeping the ends thinner for a better grip feel. The grip pattern has also been laid out so that you're getting the proper grip you need while ensuring a smooth and soft ride. You're sure to be a happy camper picking up a set of these Loam grips!   We can’t promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter. The Loam Grip features two contrasting patterns and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip’s surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design helps combat compound deterioration, ensures the grip is absorbing more vibration and provides needed structure to support the additional body weight pressing down on this crucial contact point. The pattern isn’t the only thing designed to keep your hands happy. The Loam Grip was purpose built for the demands of Enduro/Trail riding, and developing the right compound for this was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. After testing many different blends, we picked one that we call the “happy camper” composite, because it strikes a balance between an ultra soft material that wears too quickly and a harder compound that provides no tactile benefits.   Item Specifications Diameter 31mm inside - 29.5mm outside Width 133.5mm Clamp Standard 22.2 single clamp PNW Loam Grip UPC: 850005672494

by PNW

—$84.99

The all new Highside handlebar is an homage to style and skill. The DJ/Slopestyle ready Highside 760 handlebar is the perfect reflection of what listening to the athletes can create. This design allows for a stiff, responsive feel that sets the stage to bring your style to life or life to style. DJ/ Slopestyle premier handlebar designed for progression Featuring Exclusive Gradient Butting technology Full bead blast finish for increased durability and fatigue resistance Item Specifications Back Sweep (deg) 9 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Aluminum Rise 80 Upsweep 5 Weight 334 Width 760 Deity Components Highside Handlebar Flat/Riser Handlebar UPC: 817180021325

by Deity Components

—$190

The M6 bar is the modern trail rider's dream. It provides excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. With a 25mm rise, 9 backsweep and 5 upsweep, this bar provides excellent support and a classic fit Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use Provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain A modern 780mm width and proven geometry ensures a great fit for all riders Includes decal sheet to color match with ENVE wheel decals Item Specifications Back Sweep (deg) 9 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Carbon Rise 25 Upsweep 5 Weight 200 Width 780 ENVE Composites M6 Handlebar Flat/Riser Handlebar UPC: 818801025296

by ENVE Composites

—$41.99

The Spank Spoon bars are a value oriented way to personalize your trail, all-mountain, enduro, park or downhill bike. Micro grain refinement during the extrusion process for additional strength and toughness from the metal Extreme Gradual taper technology (XGT) spreads the load out over a greater area of the bar to minimize breaks and bends Item Specifications Back Sweep (deg) 9 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Aluminum Rise 40 Upsweep 5 Weight 400 Width 785 Spank Spoon Handlebar Flat/Riser Handlebar EAN: 4710155960642

by Spank

—$39.95

GE1 Evo Factory grips in factory colors. The new rider-oriented, ergonomic grip for wide riser bars. Surface texture is slip-proof and the rubber compound softer, lending constant precise grip. It actively supports the correct torso/forearm position during downhill riding by rotating the grip area towards the steering axle by 8 % the elbows are automatically outwardly raised. Forged inner clamp, fully integrated grip end connected to the inner core this establishes a soft, damping grip edge, and your hand can grip right at the outer edge. Pressure is diminished from the sensitive ulnar nerve, which is located on the outside hand. Compatible with carbon handlebars. Maximum hand grip is assured with use of silicone-based rubber compounds Texture orientation which is opposite the rotation of the hand, Damping inner core construction Item Specifications Color Frozen Stealth Defined Color Black Flange No Grip Shift Specific No Length 135 Lock On Yes Shape Round Weight 105 Ergon GE1 Evo Factory Grips Grip EAN: 4260477066534

by Ergon

—$45.99

The Race Face Chester handlebar is a budget-friendly alloy option designed for the rowdiest riding. Intended for Enduro, Downhill and Freeride applications. Shot-peened to increase fatigue resistance Cold-drawn and seamless 6061 aluminum Item Specifications Color Black Width 740 Bar Clamp Diameter 31.8 Material Aluminum Defined Color Black Upsweep 6 Back Sweep (deg) 9 Rise 25 RaceFace Chester Flat/Riser Handlebar UPC: 821973195872

by RaceFace

—$23.99

ESI Chunky Grips are best for twist shifters and for maximum shock absorption. Install and remove with rubbing alcohol Silicone construction conforms to the hand and absorbs shock Item Specifications Color Black Unit of Sale Pair Weight 80g Length 130mm Flange No Defined Color Black ESI Extra Chunky Grips Grip UPC: 181517000544

by ESI

—$27.99

The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The KNnuckleduster grips are an “all day grip” that allow you to keep it Pinned Wide Open at all times. Featuring Deity TRC rubber compound for exceptional durability Tapered inner sleeve to insure perfect contact with the handlebar Single clamp design with forward facing bolts that feature loc-tite Lasered black ano 6061 T6 aluminum clamps Short and wide rib design for added comfort with no side to side play Half waffle recessed design for added control without hot spots Chevron v-channel design for your palm swell to give an ergonomic feel Seamless transition through the end of grip for comfort 132mm length with 32mm outer diameter Item Specifications Color Black Flange No Lock On Yes Length 132mm Shape Round Weight 101g Deity Components Knuckleduster Grips Grip UPC: 817180021714

by Deity Components

—$24

The PNW Loam grips are a great option to spice up your cockpit. PNW has designed the Loam grips with comfort in mind. They have strategically shaped the grips so that there's padding where it counts for trail vibration while keeping the ends thinner for a better grip feel. The grip pattern has also been laid out so that you're getting the proper grip you need while ensuring a smooth and soft ride. You're sure to be a happy camper picking up a set of these Loam grips!   We can’t promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter. The Loam Grip features two contrasting patterns and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip’s surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design helps combat compound deterioration, ensures the grip is absorbing more vibration and provides needed structure to support the additional body weight pressing down on this crucial contact point. The pattern isn’t the only thing designed to keep your hands happy. The Loam Grip was purpose built for the demands of Enduro/Trail riding, and developing the right compound for this was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. After testing many different blends, we picked one that we call the “happy camper” composite, because it strikes a balance between an ultra soft material that wears too quickly and a harder compound that provides no tactile benefits.   Item Specifications Diameter 31mm inside - 29.5mm outside Width 133.5mm Clamp Standard 22.2 single clamp PNW Loam Grip UPC: 810035870789

by PNW

—$27

The Hell’s Gate grip has a unique design that both adds comfort and traction to your hand while riding. The knurled pattern meets large pads of rubber that are intended to go into your palm, helping create more padding that better fits the shape of your hand. On the bottom side there are the traction bars, these raised bars that run lengthwise on the grip to help your finger tips grip and give you the confidence to ride your hardest. The grip is secured by a single clamp thanks to our tapered tube, it's strong enough to not slip under the hardest of riding. For every pair of Hells Gate grips sold, we will donate $1 to Hells Gate National Park in Kenya.We exist to support the trails we love, the people that take care of them and to make your riding experience exceptional. To See the official Trail One website Click Here! See this product on the Trail One Site Here! Don't forget to check out the Trail One philanthropy projects at trailone.bike/projects Designed in Ireland Made in Taiwan Material: Synthetic rubber on grip surface, GFRP core, 6061-T aluminum on lockring Length: 132 mm Main body diameter: 32 mm Hardness sA: A20 Riding a bike through Hell's Gate National Park in Kenya is a truly wild experience. It's common to spot baboons, warthogs, giraffes and zebras in their natural habitat. I'll never forget seeing a giraffe run. It's a bizarre and beautiful thing that somehow happens in slow motion. After a nice little mosey through the park, we dropped into a bone-rattling descent high above Lake Naivasha where I was hanging on for dear life. It was white-knuckle action all the way down. It's the kind of stuff our Hell's Gate Grips are made for, hold on tight and try to enjoy! -Brian Kennedy Trail One Components Hell's Gate Grip UPC: 850022403019

by Trail One Components

—$24

The PNW Loam grips are a great option to spice up your cockpit. PNW has designed the Loam grips with comfort in mind. They have strategically shaped the grips so that there's padding where it counts for trail vibration while keeping the ends thinner for a better grip feel. The grip pattern has also been laid out so that you're getting the proper grip you need while ensuring a smooth and soft ride. You're sure to be a happy camper picking up a set of these Loam grips!   We can’t promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter. The Loam Grip features two contrasting patterns and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip’s surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design helps combat compound deterioration, ensures the grip is absorbing more vibration and provides needed structure to support the additional body weight pressing down on this crucial contact point. The pattern isn’t the only thing designed to keep your hands happy. The Loam Grip was purpose built for the demands of Enduro/Trail riding, and developing the right compound for this was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. After testing many different blends, we picked one that we call the “happy camper” composite, because it strikes a balance between an ultra soft material that wears too quickly and a harder compound that provides no tactile benefits.   Item Specifications Diameter 31mm inside - 29.5mm outside Width 133.5mm Clamp Standard 22.2 single clamp PNW Loam Grip UPC: 810035870741

by PNW

—$23.99

The DeathGrip Flangeless is the second collaboration between DMR and Brendog. DMR started with an internally tapered single-lock core grip and wrapped Brendan's design around it in super-soft Kraton compound. Flangeless grip with Soft, single Krayton rubber Tapered Core, no need for outer lock ring Waffle and Knurl patterns for increased grip Mushroom design for comfort Available in Thin (29.8mm) or Thick (31.3mm) Item Specifications Color Snow Camo Defined Color White Flange No Grip Shift Specific No Length 140 Lock On Yes Shape Round Weight 100 DMR DeathGrip Flangeless Grips Grip EAN: 5055308119416

by DMR

—$29.95

Elite Pro Grips are engineered to provide more padding where you need it most without the bulky feel - so you can enjoy the ride longer. Single clamp design Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike. Item Specifications Color Graphite Black Defined Color Black Flange No Grip Shift Specific No Length 130 Lock On Yes Shape Round ODI Elite Pro Grip UPC: 711484180675

by ODI

—$29.95

An All-Mountain/Gravity grip with a super soft and UV stable rubber compound. Ergonomically designed to reduce stress on hands while providing better overall control with additional material being placed exactly where technical riders need it. Varying textures on the grip allow reduced hand force to control the bike, reducing arm fatigue Designed to put riders upper bodies in a neutral, relaxed position Forged aluminum clamp Carbon bar compatible Item Specifications Color Black Defined Color Black Flange No Grip Shift Specific No Length 136 Lock On Yes Shape Round Weight 105 Ergon GA2 Grips Grip EAN: 4260477066466

by Ergon

—$28.95

The Elite Pro grips feature an ergonomic design that conforms to a riders hand without feeling bulky. Single clamp design Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike. Item Specifications Color Yeti Turquoise Defined Color List Turquoise Flange No Lock On Yes Shape Round ODI Elite Pro Grip

by ODI

—$5.99

Replacement bar end plugs for Ergon GA2/GA2 Fat/GA3 grips. One size Sold as a pair Fits Ergon 2018+ GA2, GA2 Fat and GA3 models only Fits most mtb handlebars on the market today Item Specifications Color Black Defined Color Black Ergon GA2/GA2 Fat/GA3 Bar End Plugs Bar End Plug EAN: 4260477066077

by Ergon

—$34.95

The evolution of the successful GE1. The new rider-oriented, ergonomic grip for wide riser bars. Thanks to the feedback collected from countless riders of the Enduro World Series, the Ergon design team succeeded in further improving the popular GE1 in certain details. Surface texture is now even more slip-proof and the rubber compound softer, lending constant precise grip. It actively supports the correct torso/forearm position during downhill riding by rotating the grip area towards the steering axle by 8 % the elbows are automatically outwardly raised. Forged inner clamp, fully integrated grip end connected to the inner core this establishes a soft, damping grip edge, and your hand can grip right at the outer edge. Pressure is diminished from the sensitive ulnar nerve, which is located on the outside hand. Compatible with carbon handlebars. Maximum hand grip is assured with use of silicone-based rubber compounds Texture orientation which is opposite the rotation of the hand Damping inner core construction Item Specifications Color Black Defined Color Black Flange No Grip Shift Specific No Length 135 Lock On Yes Shape Round Weight 119 Ergon GE1 Evo Grips Grip EAN: 4260477066169

by Ergon

—$125

The Crockett Carbon Handlebar brings a known and comfortable shape to help you focus on your ride rather than how your hands feel. Coming in two different diameters and rises, we have a 31.8mm diameter x 25mm rise and a 35mm diameter x 35mm rise. We choose to stick with the more traditional 8 degree backsweep and 5 degree upsweep with both bars also coming in at 800mm length, but you can trim them down to 740mm and anywhere between. With Trail One grips, a Trail One Stem and this Crockett bar, you can complete the whole Trail One cockpit package. For every Crockett Handlebar sold, we donate $1 to Crockett Hills Regional Park. We exist to support the trails we love, the people that take care of them and to make your riding experience exceptional. To See the official Trail One website Click Here! See this product on the Trail One Site Here! Don't forget to check out the Trail One philanthropy projects at trailone.bike/projects Designed in Ireland Made in Taiwan Material: Carbon Fiber Width: 800 mm Clamp (diameter of bar):35 mm Rise: Your choice of 15 mm or 35 mm Sweep: 8 degrees back, 5 degrees up Weight: 15 mm rise: 205 grams. 35 mm rise: 216 grams. Tested to spec: ISO4210-5 My first mountain bike rides were straight up sufferfests in the Crockett Hills with my Uncle Dennis. I would end up walking most of the climbs and he would be waiting at the top for me, always fresh and ready for the next one. I think it's a fitting tribute that one of the first signature products from Trail One Components is named after the place where I learned to love mountain biking and those brutal climbs. These bars are a fitting first step when building out your new dream bike - or a solid upgrade for your current ride. - Brian Kennedy Trail One Components Crockett Carbon Flat/Riser Handlebar

by Trail One Components

—$179.99

The Next R handlebar features 800mm of premium unidirectional carbon with shred-ready positioning. DH strength and Enduro weight for when you really need to lean into it. 35mm bar diameter for strength/weight ratio Manufactured from UD Carbon with matte clearcoat Carbon optimized flex for improved small bump compliance Item Specifications Color Black Weight 215 Width 800 Bar Clamp Diameter 35.0 Material Carbon Defined Color Black Upsweep 5 Back Sweep (deg) 8 Rise 35 RaceFace Next R Flat/Riser Handlebar UPC: 821973318110

by RaceFace

—$26.99

RaceFace Half Nelson Lock-On Grips Super-slim profile Race Face MX style half waffle for extra grip security Topographical moisture channels Compatible with ODI lock jaw clamps Item Specifications Color Black Unit of Sale Pair Weight 93g Length 134mm Flange No Defined Color Black RaceFace Half Nelson Grip UPC: 821973194950

by RaceFace

—$89.99

The Spank Spike Race Bars is designed using premium technology to withstand the demands of all-mountain, enduro, trail, and downhill riding. MGR Super 6 Alloy offers increased strength and stiffness compared to conventional alloy bars CNC bending and extreme gradual taper (XGT) technology result in lighter, thinner wall Shot-peening and anodizing finishes enhance fatigue life even further Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 31.8 Color Matte Black Defined Color Black Material Aluminum Rise 50 Upsweep 4 Weight 330 Width 800 Spank Spike Race Bar Flat/Riser Handlebar EAN: 4717760767918

by Spank

—$23.99

This collaboration between Brendan "Brendog" Fairclough and DMR brings an offering that marries some classic grip features to work for the demands of anything from all mountain to downhill riding. Single Krayton rubber Flange side mushroom pattern for comfort Tapered core - no need for outer lock ring Combination of waffle and knurl patterns for increased grip Item Specifications Color Camo Defined Color Green Shape Round Lock On Yes Flange No Grip Diameter 31.3mm DMR DeathGrip Flangeless Grips Grip EAN: 5055308116866

by DMR

—$23.99

The DeathGrip Race Edition is the second collaboration between DMR and Brendog. DMR started with an internally tapered single-lock core grip and wrapped Brendan's design around it in secret super-soft 'Race Day' compound. Super Soft 'RACE DAY' Compound for a Secret Super-Tacky Formula Tapered Core, no need for outer lock ring Waffle and Knurl patterns for increased grip Mushroom design for comfort Available in Thin (29.8mm) or Thick (31.3mm) Item Specifications Color Black Defined Color Black Flange Yes Grip Shift Specific No Length 140 Lock On Yes Shape Round Weight 120 DMR DeathGrip Race Edition Grips Grip EAN: 5055308117221

by DMR

—$219.95

An ideal handlebar for riding anything from all mountain to downhill, this carbon offering of the Fatbar combines a blend of strength, stiffness, shock absorption and weight savings. Increased center section width for fine-tuned flex characteristics Downhill and twin crown fork compatible Uni-Directional carbon construction Ride tuned to provide an ideal combination of stiffness and shock absorption Permanent graphics, set-up grid and cut marks Item Specifications Color Carbon Weight 305 Width 800 Bar Clamp Diameter 35.0 Material Carbon Defined Color Black Upsweep 5 Back Sweep (deg) 7 Rise 30 Renthal FatBar Carbon Handlebar Flat/Riser Handlebar UPC: 765442154017

by Renthal

—$26.99

RaceFace Half Nelson Lock-On Grips Super-slim profile Race Face MX style half waffle for extra grip security Topographical moisture channels Compatible with ODI lock jaw clamps Item Specifications Color Blue Unit of Sale Pair Weight 93g Length 134mm Flange No Defined Color Blue RaceFace Half Nelson Grip UPC: 821973195056

by RaceFace

—$179.99

The Next R handlebar features 800mm of premium unidirectional carbon with shred-ready positioning. DH strength and Enduro weight for when you really need to lean into it. 35mm bar diameter for strength/weight ratio Manufactured from UD Carbon with matte clearcoat Carbon optimized flex for improved small bump compliance Item Specifications Color Black Weight 215 Width 800 Bar Clamp Diameter 35.0 Material Carbon Defined Color Black Upsweep 5 Back Sweep (deg) 8 Rise 20 RaceFace Next R Flat/Riser Handlebar UPC: 821973318103

by RaceFace

—$23.99

The DeathGrip Race Edition is the second collaboration between DMR and Brendog. DMR started with an internally tapered single-lock core grip and wrapped Brendan's design around it in secret super-soft 'Race Day' compound. Super Soft 'RACE DAY' Compound for a Secret Super-Tacky Formula Tapered Core, no need for outer lock ring Waffle and Knurl patterns for increased grip Mushroom design for comfort Available in Thin (29.8mm) or Thick (31.3mm) Item Specifications Color Black Defined Color Black Flange No Grip Shift Specific No Length 140 Lock On Yes Shape Round Weight 100 DMR DeathGrip Race Edition Grips Grip EAN: 5055308117245

by DMR

—$24

The PNW Loam XL grips are a great option to spice up your cockpit. PNW has designed the Loam grips with comfort in mind. They have strategically shaped the grips so that there's padding where it counts for trail vibration while keeping the ends thinner for a better grip feel. The grip pattern has also been laid out so that you're getting the proper grip you need while ensuring a smooth and soft ride. You're sure to be a happy camper picking up a set of these Loam grips!   We can’t promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all new Loam Grip XL. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter. The Loam Grip XL features two contrasting patterns and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip’s surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design helps combat compound deterioration, ensures the grip is absorbing more vibration and provides needed structure to support the additional body weight pressing down on this crucial contact point. The pattern isn’t the only thing designed to keep your hands happy. The Loam Grip XL was purpose built for the demands of Enduro/Trail riding, and developing the right compound for this was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. After testing many different blends, we picked one that we call the “happy camper” composite, because it strikes a balance between an ultra soft material that wears too quickly and a harder compound that provides no tactile benefits.   Item Specifications Diameter 34mm inside Width 133.5mm Clamp Standard 22.2 single clamp PNW Loam Grip UPC: 810035871922

by PNW

—$41.99

The Spank Spoon bars are a value oriented way to personalize your trail, all-mountain, enduro, park or downhill bike. Micro grain refinement during the extrusion process for additional strength and toughness from the metal Extreme Gradual taper technology (XGT) spreads the load out over a greater area of the bar to minimize breaks and bends Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Material Aluminum Rise 25 Upsweep 5 Weight 395 Width 785 Spank Spoon Handlebar Flat/Riser Handlebar EAN: 4710155960635

by Spank

—$29.95

Elite Pro Grips are engineered to provide more padding where you need it most without the bulky feel - so you can enjoy the ride longer. Single clamp design Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike. Item Specifications Color Burnt Red Black Defined Color Red Flange No Grip Shift Specific No Length 130 Lock On Yes Shape Round ODI Elite Pro Grip UPC: 711484180651

by ODI

—$54.99

The Race Face Aeffect handlebar is an budget-friendly alloy bar intended for XC and Trail use. The most affordable option for riders looking for a 35mm handlebar. 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance Manufactured from cold drawn, seamless aluminum Shot-peened to increase fatigue resistance Item Specifications Back Sweep (deg) 9 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Aluminum Rise 20 Upsweep 5 Weight 345 Width 780 RaceFace Aeffect Flat/Riser Handlebar UPC: 821973309422

by RaceFace