—$89.50

Eliminate dropped chains forever and more than double your chainring life with the new OneUp Components V2 Chain Guide. As the trend for lower and slacker bikes continues, chainring protection is becoming even more important. The OneUp Bash Guide uses the same simple, one tool installation and adjustment as our best-selling ISCG05 Chain Guide, but adds more strength where you need it. The OneUp Bash Guide was developed with input from EWS World Champions, Richie Rude and Jared Graves. Reinforced Nylon bash guards and a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the OneUp Bash Guide can handle the biggest hits, but at a weight of only 102g (34T) you may forget it’s even there. The first chain guide designed to be both Oval and Boost compatible Weight: 90g 28-30T, 105g 32-34T, 110g 36T Capacity: 28-36T Chainline: 7.5mm adjustment Mount: ISCG05 Color: Black top guide piece included Material: 7075 aluminum, top guide glass reinforced thermoplastic OneUp Bash Guide V2 Chain Retention System EAN: 0038362821940

by OneUp

—$59.50

Eliminate dropped chains forever and more than double your chainring life with the new OneUp Components Chain Guide. At only 35g the OneUp Chain Guide weighs less than a sip of water, and can save you money in less than a season. The first chain guide designed to be both Oval and Boost compatible. Weight: 40g Capacity: 26-38T Chainline: 7.5mm adjustment Mount: ISCG05 Color: Black top guide piece included Material: 7075 aluminum, top guide glass reinforced thermoplastic WHY DO I NEED A GUIDE AND A NARROW WIDE CHAINRING? NW rings are awesome, but they're not perfect and every once in a while you can drop a chain while riding. On a social ride, this means getting dropped by your friends. But when racing an Enduro a dropped chain can cost you the podium, which is why almost every EWS pro runs both a chain guide and narrow wide chainring. HOW CAN I DOUBLE MY CHAINRING LIFE? As a Narrow Wide ring wears, over time the teeth thin and lose their chain retention ability, leading to more dropped chains. The OneUp guide extends NW ring life by limiting the chains side-to-side movement reducing the NW tooth wear and totally preventing the chain from derailing. Installing a OneUp guide means you now only have to replace your chainring when the driving faces have worn out, which typically doubles your usable chainring life. Buy less stuff - Work Less Ride More. OneUp Top Chainguide V2 Chain Retention System EAN: 0038262821941

by OneUp

—$94.95

Engineered to offer full coverage and protection without costing an arm and a leg, our TRS Plus Chainguide is lightweight, comprehensive, and versatile. Modular bashguard assemblies allow riders to choose from two different sizes of bashguard (28-34t included) Not only does the Compact Upper Slider offer more tire and frame clearance on Boost bikes, but the polycarbonate slider is solvent resistant, and the tool-free compact upper slider is co-molded to cut down on noise CNC-machined aluminum backplate Includes 2 sizes of replaceable Direct Mount Bashguards (28-30t and 32-34t), steel hardware, optional lower armature, and adjustable, co-molded, tool-free compact upper slider 28-36t capacity Offers chain retention Compatible with non-Boost, Boost, and SuperBoost chainlines Item Specifications Color Black Defined Color Black Material Aluminum Max Tooth (teeth) 36 Mount Type ISCG-05 Weight 119 e*thirteen TRS Plus Chainguide Chain Retention System EAN: 4710751502864

by e*thirteen

—$112.99

The absoluteBLACK Oval Bash Guide is designed specifically for oval chainrings, keeping your chain secure at every single crank position. This bash guard system provides exceptional durability with maximum weight savings thanks to intelligent design and titanium hardware. Chainline is adjustable in 0.5mm increments, with 4 included spacers 0.5, 1, 2 and 3.5mm Designed for use with any 1x10, 1x11 or 1x12 drivetrain with absoluteBLACK oval or round chainring Suitable for XC, trial, enduro, and aggressive enduro 26-34t capacity for oval chainrings or 28-36t capacity for round chainrings The outer section of the cage can be moved without tools, allowing for easy access to the chain while on the trail Fits to ISCG-05 mount Small markers on the side of the back-plate show the ideal position of the guide for your desired chainring size 69g Fully compatible with oval chainrings The adjustable 48-53mm chainline makes it compatible with most bike setups Includes titanium hardware and spacers Item Specifications Color Black Defined Color Black Material Aluminum Max Tooth (teeth) 34 Mount Type ISCG-05 Weight 69 absoluteBLACK Oval Bash Guide Chain Retention System EAN: 5110846002559

by absoluteBLACK

—$99.95

MRP AMg V2 Alloy Chain Guide 26-32T ISCG-05 BlackSpecifications: Model: Alloy (V2) Range: 26-32t Mount: ISCG-05 Color: Black Weight: 109g Features: All Mountain guide that is the hybrid of the 1x and XCG guides Perfect for use with tensioned rear derailleurs and virtually silent and drag free while riding V2 versions utilize a new lightened backplate, new co-molded upper guide with a softer inner material to silence chain rub/slap on rougher terrain, and new lower profile skid for increased ground clearance MRP AMg V2 Alloy Chain Guide Chain Retention System UPC: 702430164955

by MRP

—$39.95

1x V3 CS Chainguide 28-34t range (oval compatible up to 32t) Ideal for 1x10, 1x11, and 1x12 drivetrains Tracked and grooved upper guide and backplate interface increases stiffness and eases installation Compatible with chainlines 49mm and wider Item Specifications Chainguide Mount Type ISCG-05 Color Black Max Tooth (teeth) 34 Weight 33 MRP 1x V3 CS Chain Retention System UPC: 702430172936

by MRP

—$49.95

Engineered to offer full coverage and protection without costing an arm and a leg, our TRS Plus Chainguide is lightweight, comprehensive, and versatile. Intended use: trail, all mountain, enduro 48/53mm chainline adjustable Replaceable upper sharkfin wearplate and direct-mount bashguard Lower roller replaceable to fit double-specific cranksets Item Specifications Chainguide Mount Type ISCG-05 Color Black e*thirteen TRS Plus Chainguide Chain Retention System EAN: 4710751502703

by e*thirteen

—$129

e*thirteen Chain Retention Systems Wearplates have chainring size indicators for simple adjustment Lower armature is adjustable and replaceable Easily change chains and chainrings w/o removing wearplates ISCG adapter plate (for use on frames with no ISCG tabs) sold separately Item Specifications Chainguide Mount Type ISCG-05 Max Tooth (teeth) 38 e*thirteen LG1+ Chainguide Chain Retention System EAN: 4710751500402

by e*thirteen

—$17

Plastic and rubber replacement parts for e*thirteen chainguides. Replacement upper slider for Gen2 LG1 and TRS guides. Fits Gen2 guides only Includes Upper slider, bolt x1, nut x1 e*thirteen Chainguide Service Parts Chain Retention System Part EAN: 4710751500822

by e*thirteen

—$17.50

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$60.94

The e*thirteen TRS Chainguide is designed to take extreme punishment, without punishing your wallet, offering full drivetrain protection (upper slider and bashguard) and a durable steel backplate. A modular assembly allows riders to choose from one of three sizes of bash guards (28-36t included). All polycarbonate parts are solvent resistant, and our tool-free compact upper slider is co-molded to cut down on noise. Durable steel backplate A modular assembly allows riders to choose from one of three sizes of bash guards (includes 28-30T and 32-34T bashguards) The tool-free compact upper slider is co-molded to cut down on noise Polycarbonate parts are solvent resistant, while the chromoly steel backplate offers durable protection Compatible with non-Boost, Boost, and Super Boost chainlines Includes chainguide, direct mount bashguard x2, long ISCG bolt x2, short ISCG bolt x2, chainline spacer x3 Item Specifications Chainguide Mount Type ISCG-05 Color Black Defined Color Black Material Steel Max Tooth (teeth) 38 Mount Type ISCG-05 Weight 161 e*thirteen TRS Chainguide Chain Retention System EAN: 4710751502895

by e*thirteen

—$29.95

Adaptor backplate that allows an ISCG-05 guide to be mounted on a bike with a traditional threaded bottom bracket. MRP BB Adaptor Chain Retention System Part UPC: 702430155021

by MRP

—$17.50

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$14

Plastic and rubber replacement parts for e*thirteen chainguides. e*thirteen Chainguide Service Parts Chain Retention System Part EAN: 4710751503212

by e*thirteen

—$17.50

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$69.95

The MRP XCg bash guard mounts directly to the bike frame to protect the crank and chainrings from damage. Perfect for frames with integrated upper guides Mounts to lowest two ISCG-05 bolt holes Sturdy aluminum backplate for extra durability and stiffness Protects chainrings up to 32T (or 30T oval) Designed for XC and trail riding Integrated skid protects chainrings and glides over rocks and obstacles Helps prevent frame damage caused by dropped chains Item Specifications Color Black Defined Color Black Max Tooth (teeth) 32 Mount Type ISCG-05 MRP XCg Bash Guard Chain Retention System UPC: 702430173759

by MRP

—$54.95

The TRS Race Chainguide is engineered to take extreme punishment dealt by riders on enduro bikes, yet remains light enough to use on XC rigs. Mounting to any bike with ISCG05 tabs, the TRSr SL chainguide will fit almost every bike on the market All polycarbonate parts are now solvent resistant, so they wont get brittle or crack after exposure to lubes and cleaners The compact upper slider has a co-molded soft rubber interior to cut down on noise, and opens quickly and easily without tools Item Specifications Chainguide Mount Type ISCG-05 Color Black Max Tooth (teeth) 38 Weight 37 e*thirteen TRS Race Chainguide Chain Retention System EAN: 4710751502857

by e*thirteen

—$17.50

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$74.95

Designed for enduro and trail riding, the MRP AMg CS chain guide utilizes a premium-finish steel backplate, durable nylon upper guide and a patented integrated skid to eliminate dropped chains and bent chainrings. Premium-finish steel backplate provides stiffness and durability The co-molded TR upper guide provides for quiet operation Compatible with 28-34T chainrings ISCG-05 mount Designed for use with 1x drivetrains Boost compatible Item Specifications Chainguide Mount Type ISCG-05 Color Black Defined Color Black Material Steel Max Tooth (teeth) 34 Weight 152 MRP AMg CS Composite Chain Guide Chain Retention System UPC: 702430174343

by MRP

—$159.95

MRP AMg V2 Carbon Chain Guide 26-32T ISCG-05 BlackSpecifications: Model: Carbon(V2) Range: 26-32t Mount: ISCG-05 Color: Black Weight: 97g Features: All Mountain guide that is the hybrid of the 1x and XCG guides Perfect for use with tensioned rear derailleurs and virtually silent and drag free while riding V2 versions utilize a new lightened backplate, new co-molded upper guide with a softer inner material to silence chain rub/slap on rougher terrain, and new lower profile skid for increased ground clearance MRP AMg V2 Carbon Chain Retention System UPC: 702430165006

by MRP

—$17.50

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$17.95

Frame tab adaptersFor use with English threaded bottom bracket shells with no ISCG'05 mount tabs e*thirteen Adaptors Chain Retention System Part EAN: 4712757573329

by e*thirteen

—$99.95

Designed for enduro and trail riding, the MRP AMg V2 Alloy chain guide features an upper guide for chain security and an integrated skid to eliminate dropped chains and bent chainrings. Alloy backplate provides weight savings and durability The co-molded TR upper guide provides for quiet operation ISCG-05 mount Designed for use with 1x drivetrains Compatible with chain lines 49mm and wider Tracked and grooved upper guide and backplate increases stiffness Item Specifications Color Black Defined Color Black Material Alloy Max Tooth (teeth) 38 Mount Type ISCG-05 Weight 111 MRP AMg V2 Alloy Chain Guide Chain Retention System UPC: 702430164979

by MRP

—$15.95

e*thirteen by The Hive Chain Retention System Parts e*thirteen Chainguide Service Parts Chain Retention System Part EAN: 4712757572728

by e*thirteen

—$10.90

Plastic and rubber replacement parts for e*thirteen chainguides. e*thirteen Chainguide Service Parts Chain Retention System Part EAN: 4710751500884

by e*thirteen

—$12.95

Plastic and rubber replacement bits for e*thirteen guides. e*thirteen Chainguide Service Parts Chain Retention System Part EAN: 4712757572742

by e*thirteen

—$13.20

MRP chain retention system parts for G2, System 1,2 and 3, SB-3 and LRP guides Kit includes one roller with bearings and mounting bolts/washers; there are two roller kits per chainguide Bearing, Bolt, Sleeve, Washer and Urethane Roller 50g MRP Rollers and Pulleys Chain Retention System Part UPC: 702430129077

by MRP

—$64.99

The absoluteBLACK Oval Chainguide is designed specifically for oval chainrings, keeping the chain secure at every single crank position Fits to ISCG-05 mount Fully compatible with 26-34 tooth oval chainrings, or 28-36 tooth round chainrings Designed for use with any 1x10, 1x11 or 1x12 drivetrain with absoluteBLACK oval or round chainring Chainline is adjustable in 0.5mm increments, with 4 included spacers 0.5, 1, 2 and 3.5mm The outer section of the cage can be moved without tools, allowing for easy access to the chain while on the trail Fully compatible with oval chainrings The adjustable 48-53mm chainline makes it compatible with most bike setups Includes titanium hardware and spacers Item Specifications Chainguide Mount Type ISCG-05 Color Black Max Tooth (teeth) 34 Weight 22.2 absoluteBLACK Oval Guide Chain Retention System EAN: 5110846001804

by absoluteBLACK

—$69.95

Gnarwolf Chainguide Infinite chainline adjustment between 48mm and 54mm via an elliptical expanding mandrel - There are no shims required Infinite vertical adjustment between 28 tooth and 36 tooth chainrings or 28-34T elliptical rings Quick adjust guide allows for easy chain removal without changing any positional adjustments Item Specifications Chainguide Mount Type ISCG-05 Wolf Tooth Gnarwolf Chain Retention System UPC: 812719023009

by Wolf Tooth

—$17.50

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$34.99

Problem Solvers Chain Spy Chain Deflectors 31.8mm clamp with shims for 28.6mm Alloy clamp & slider Plastic guide Not intended for downhill, aggressive or trick riding Item Specifications Front Derailleur Clamp 31.8 (1-1/4") Problem Solvers ChainSpy Chain Retention System Chain Deflector UPC: 708752095236

by Problem Solvers

—$17

Plastic and rubber replacement parts for e*thirteen chainguides. e*thirteen Chainguide Service Parts Chain Retention System Part EAN: 4710751500839

by e*thirteen

—$33.99

K-Edge Pro Chain Catchers. A lighter version of the original K-Edge chain catcher, the Pro has been tested and proven. 6061 T6 aluminum construction for light weight - 9.8 grams including hardware Locking system allows installation and setup of front derailleur separate from adjustment of the chain catcher Compatible with all braze-on road front derailleurs from SRAM, Campagnolo, and Shimano Item Specifications Front Derailleur Clamp Braze-on K-Edge Chain Catcher Professional Chain Deflector UPC: 858953003230

by K-Edge

—$17.50

COMPATIBLE WITH THE FOLLOWING ONEUP GUIDES CHAIN GUIDE - ISCG05 - V2 BASH GUIDE - ISCG05 - V2 Kit includes 1 two piece top guide OneUp Chainguide Top Kit V2 Chain Retention System

by OneUp

—$13.95

e*thirteen Bolt Kits e*thirteen ISCG Bolt Kits Chain Retention System Part EAN: 4712757572940

by e*thirteen

—$84.95

Gnarwolf Chainguide Wolf Tooth Gnarwolf Chain Retention System Part UPC: 812719026062

by Wolf Tooth

—$69.95

The 1x V3 chain guide provides extra security for 1x10 or 1x11 drivetrains in a lightweight, durable package. Available with a variety of mounting options. Compatible with traditional threaded bottom brackets only Compatible with 28t to 38t chainrings Softer co-molded upper for quiet operation Installs and adjusts with a single 4mm hex Tracked and grooved upper guide and backplate increases stiffness MRP 1x V3 Alloy Chain Retention System UPC: 702430165211

by MRP

—$120.69

The TRS Race Chainguide is engineered to take extreme punishment dealt by riders on enduro bikes, yet remains light enough to use on XC rigs. Modular assembly allows riders to choose from one of three sizes of bash guards (included) All polycarbonate parts are now solvent resistant, so they wont get brittle or crack after exposure to lubes and cleaners The compact upper slider has a co-molded soft rubber interior to cut down on noise, and opens quickly and easily without tools Item Specifications Chainguide Mount Type ISCG-05 Color Black Max Tooth (teeth) 38 Weight 111 e*thirteen TRS Race Chainguide Chain Retention System EAN: 4710751502833

by e*thirteen

—$29.95

Replacement uppers for a variety of MRP chain guides. MRP Upper Guide Chain Retention System Part UPC: 702430165198

by MRP

—$69.95

Gnarwolf Chainguide Item Specifications Chainguide Mount Type High Direct Mount Wolf Tooth Gnarwolf Chain Retention System UPC: 812719023016

by Wolf Tooth

—$17

Plastic and rubber replacement parts for e*thirteen chainguides. e*thirteen Chainguide Service Parts Chain Retention System Part EAN: 4710751500846

by e*thirteen

—$39.95

1x V3 CS Chainguide 28-36t range Ideal for 1x10, 1x11, and 1x12 drivetrains Tracked and grooved upper guide and backplate interface increases stiffness and eases installation Compatible with chainlines 49mm and wider Item Specifications Chainguide Mount Type E2 Type Mount Color Black Max Tooth (teeth) 36 MRP 1x V3 CS Chain Retention System UPC: 702430174350

by MRP

—$69.95

Gnarwolf Chainguide Infinite chainline adjustment between 45mm and 51mm via an elliptical expanding mandrel - There are no shims required Infinite vertical adjustement between 34t and 46t for round and oval chainrings Loosen one screw to flip the guide out of the way for easy chain removal without losing any of the guide's adjustments Wolf Tooth Gnarwolf Chain Retention System UPC: 812719023047

by Wolf Tooth

—$159.95

Designed for enduro and trail riding, the AMg V2 Carbon chain guide features an upper guide for chain security and an integrated skid to protect the chainring and frame. Thick carbon backplate for improved stiffness, weight, and durability Compatible with 1x9, 1x10, and 1x11 drivetrains Integrated nylon skid glides over rocks Softer co-molded upper for quiet operation Installs and adjusts with a single 4mm hex Compatible with chain lines 49mm and wider Tracked and grooved upper guide and backplate increases stiffness MRP AMg V2 Carbon Chain Retention System UPC: 702430165013

by MRP

—$19.99

The K-EDGE chain catcher mounts to all braze-on type front derailleurs. Prevents frame damage from a dropped chain. 10 grams For use with braze-on front derailleurs Protects your valuable frame from damage caused by a derailed chain Includes all mounting hardware for Shimano, SRAM and Campagnolo front derailleurs, including a new radius washer with secure mounting interface 6061 T6 aluminum Item Specifications Front Derailleur Clamp Braze-on K-Edge Chain Catcher Road Braze On Chain Catcher Chain Deflector UPC: 852508002006

by K-Edge

—$14.95

MRP chain retention system parts for G2, System 1,2 and 3, SB-3 and LRP guides MRP Rollers and Pulleys Chain Retention System Part UPC: 702430136556

by MRP

—$29.95

Replacement uppers for a variety of MRP chain guides. MRP Upper Guide Chain Retention System Part UPC: 702430166492

by MRP

—$69.95

The 1x V3 chain guide provides extra security for 1x10 or 1x11 drivetrains in a lightweight, durable package. Available with a variety of mounting options. Compatible with 28t to 38t chainrings Softer co-molded upper for quiet operation Installs and adjusts with a single 4mm hex Tracked and grooved upper guide and backplate increases stiffness MRP 1x V3 Alloy Chain Retention System UPC: 702430165259

by MRP

—$99.95

The 1x V3 Carbon chain guide provides extra security for 1x10 or 1x11 drivetrains. A thick carbon mounting plate provides stiffness, durability, and light weight. Compatible with 28t to 38t chainrings Carbon backplate Softer co-molded upper for quiet operation Installs and adjusts with a single 4mm hex Tracked and grooved upper guide and backplate increases stiffness MRP 1x V3 Carbon Chain Retention System UPC: 702430164993

by MRP

—$15

OneUp Components Chain Guide Top Kit Included in the following OneUp Kits Chain Guide - ISCG05 Bash Guide Low Direct Mount High Direct Mount BB Mount/ISCG03 OneUp Chainguide Top Kit Chain Retention System

by OneUp