- Shop
- Bikes / Frames
-
Components
- Tires / Tubes / Sealant / Valves
- Forks / Parts
- Rear Shocks / Parts
- Groupsets / Drivetrain Bundles
- Drivetrain
- Shifters
- Handlebars / Grips
- Stems
- Brakes / Pads / Adaptors
- Seatposts / Clamps / Levers
- Saddles / Seats
- Pedals / Cleats / Parts
- Wheels / Hubs / Rims
- Headsets / Parts
- Cables / Housing
-
Accessories
- Tools / Lube / Solvents
- Car / Truck Racks / Tailgate Pads
- Frame Straps
- Pumps / Inflation
- Chainstay / Frame Protectors / Fenders
- Computers / GPS / Electronics
- Hydration Packs / Bags
- Lights
- Water Bottles / Cages
- Gift Ideas / Novelties
- Indoor Trainers
- Bike Travel / Shipping Cases
- Nutritionals
- Locks
- Storage Racks / Stands
-
Apparel
- Helmets
- Jerseys
- Shorts / Bibs
- Gloves
- Shoes / Socks
- Pads / Protective Gear
- Pants
- Eyewear
- Chamois / Short Liners / Base Layer
- Chamois Creams / Embrocations / Butt'r
- Jackets / Vests / Hoodies / Flannels
- Casual Wear
- Headwear
- Brands
- Top Secret Sales (Do Not Tell!)
- Watch
- Read
- My Account
- Help / FAQ's
- Contact Us / Locations
- Call Us | 1-805-375-4525
- Why Shop With Us?
- About Us
- Continue Shopping
- Your Cart is Empty
RaceFace
-
Race Face Small Crank Boots, For Alloy Cranks, 2-Pack Black
—$13.49
Race Face Crank Boot protects the crank arm from rocks and debris Fits from Race Face: Turbine, Atlas, Evolve and Ride Cranks Fits from Shimano: XT, SLX, Deore Cranks Fits from SRAM: X1 (Alloy), X9, X7, X5, S1400, S1000, S800 Cranks Check out our FAQ here to help figure out which crank boots are right for your cranks RaceFace Crank Boots - For Alloy Crank Part UPC: 895428020163
Mpn: A10068BLKby RaceFace
-
Race Face Team X-Type External Bottom Bracket, 68/73
—$44.99
RaceFace X-Type bottom brackets for use with 24mm spindle cranksets from Race Face, Shimano and FSA. Allows the use of a 24mm spindle X-Type or EXI crankset in a 68/73mm BSA threaded bottom bracket shell 6805 bearings Aluminum cups Interchangable with select Shimano and FSA BB systems Installed using standard 16-notch bottom bracket tool Item Specifications BB Shell Width (mm) 68 BB Shell Width (mm) 73 BB/Frame Interface English Bottom Bracket Shell I.D. 1.37 Defined Color Black Spindle Interface Type FSA MegaExo Spindle Interface Type FSA MegaExo Light Spindle Interface Type RaceFace EXI Spindle Interface Type Shimano Hollowtech II Weight 95 RaceFace X-Type Bottom Brackets UPC: 821973209661
Mpn: BBXTTMby RaceFace
-
RaceFace CINCH Bottom Bracket: BSA 73mm Shell x 30mm Spindle, External Seal
—$59.99
RaceFace B6 Cupset CupsetsLooking to upgrade your cranks to the Cinch 30 system by RaceFace? Make sure not to forget the bottom bracket to go with it! RaceFace cranks are a shop favorite, from the incredibly light and stiff Next SL's to the durable and affordable Aeffects. You wont be dissapointed! Standard 6806 retainer bearings Bearings are factory filled with Phil Wood grease Cups are machined for a high tolerance frame fit Includes an industry exclusive inner sleeve to protect against water RaceFace BSA30 cups are installed with a RF BSA30 cup tool or with BSA30 standard tools from Rotor, ZIpp, and Enduro PLEASE NOTE: when using Turbine cranks, remove the plastic sleeve as the spindle is slightly wider and may cause unwanted tension. Item Specifications Weight 87g BB/Frame Interface English Spindle Interface Type RaceFace Cinch 30mm BB Shell Width 68/73mm Defined Color Black RaceFace CINCH Bottom Bracket Bottom Brackets UPC: 821973349497
Mpn: BB19BSA687330by RaceFace
-
Race Face Chester 35 Riser Handlebar: 35 x 780mm 35mm Rise Black
—$54.99
The Race Face Chester handlebar is a budget-friendly alloy option designed for the rowdiest riding. Intended for Enduro, Downhill and Freeride applications. Shot-peened to increase fatigue resistance Cold-drawn and seamless 6061 aluminum 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance Item Specifications Color Black Width 780 Bar Clamp Diameter 35.0 Material Aluminum Defined Color Black Rise 35 RaceFace Chester Flat/Riser Handlebar UPC: 821973281292
Mpn: HB16CHE3535X780BLKby RaceFace
-
RaceFace Turbine R 35 Stem - 32mm, 35 mm Clamp, +/-0, 1 1/8", Black
—$109.99
Race Face Turbine R 35 Stem We took our super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. Features: CNC Aluminum 0° rise for perfect fit on aggressive bike frames Extensive CNC machining for weight reduction without impacting strength TopLock faceplate design for easy and secure installation Color: Black Steer Tube Diameter: 35mm Weight: 138g (50mm) Length: 32mm RaceFace Turbine R 35 Stem Stems UPC: 821973309651
Mpn: ST17TURR3532X0BLKby RaceFace
-
Race Face Large Crank Boots, 2-Pack (pair) Black Carbon Bicycle Cranks
—$13.80
Race Face Crank Boot protects the crank arm from rocks and debris. Fits Race Face Next/Next SL, SIXC, Respond, SRAM XX, XO, Noir, FSA Gravity and Gravity Lite and Shimano Saint Check out our FAQ here to help figure out which crank boots are right for your cranks RaceFace Crank Boots - For Carbon Crank Part UPC: 821973164106
Mpn: A10066BLKby RaceFace
-
RaceFace Turbine R 35 Stem - 40mm, 35 mm Clamp, +/-0, 1 1/8", Black
—$109.99
Race Face Turbine R 35 Stem We took our super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. Features: CNC Aluminum 0° rise for perfect fit on aggressive bike frames Extensive CNC machining for weight reduction without impacting strength TopLock faceplate design for easy and secure installation Color: Black Steer Tube Diameter: 35mm Weight: 138g (50mm) Length: 40mm RaceFace Turbine R 35 Stem Stems UPC: 821973309668
Mpn: ST17TURR3540X0BLKby RaceFace
-
Race Face Chester Handlebar: 31.8 x 740mm 1" Rise, Black
—$45.99
The Race Face Chester handlebar is a budget-friendly alloy option designed for the rowdiest riding. Intended for Enduro, Downhill and Freeride applications. Shot-peened to increase fatigue resistance Cold-drawn and seamless 6061 aluminum Item Specifications Color Black Width 740 Bar Clamp Diameter 31.8 Material Aluminum Defined Color Black Upsweep 6 Back Sweep (deg) 9 Rise 25 RaceFace Chester Flat/Riser Handlebar UPC: 821973195872
Mpn: HB12CHE31.8X740BLKby RaceFace
-
RaceFace Turbine R 35 Stem - 50mm, 35 mm Clamp, +/-0, 1 1/8", Black
—$109.99
Race Face Turbine R 35 Stem We took our super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. Features: CNC Aluminum 0° rise for perfect fit on aggressive bike frames Extensive CNC machining for weight reduction without impacting strength TopLock faceplate design for easy and secure installation Color: Black S.H.I.S. Stem Clamp Diameter: 28.6 Weight: 138g (50mm) Length: 50mm RaceFace Turbine R 35 Stem Stems UPC: 821973309675
Mpn: ST17TURR3550X0BLKby RaceFace
-
RaceFace 8-16mm Hex Adaptor Tool
—$10.99
Bottom Bracket Lock Ring ToolAdaptor to allow 8mm hex tool to be used on 16mm CINCH bolt and puller cap RaceFace Bottom Bracket Bottom Bracket Tool UPC: 895428019181
Mpn: D30351by RaceFace
-
RaceFace Aeffect R 35 Stem - 40mm, 35 Clamp, +/-0, 1 1/8", Aluminum, Black
—$64.99
Item Specifications Color Black Genre 40 Bar Clamp Diameter 35.0 Stem Angle 0 Defined Color Black RaceFace Aeffect R 35 Stem Stems UPC: 821973309781
Mpn: ST17AER3540X0BLKby RaceFace
-
Race Face CINCH Wrench Bottom Bracket Tool 30mm BSA BB Black
—$29.99
This tool is made specifically and only for RaceFace BSA30 Bottom Brackets. RaceFace made a proprietary tool to install that BB and this is it. You only need one tool to install the BB. RaceFace Bottom Bracket Bottom Bracket Tool UPC: 895428013622
Mpn: D30146by RaceFace
-
Race Face Chester 35 Stem: 40mm x 35mm +/- 0 degree Black
—$49.99
The Chester Stem is a practical stem with big bold graphics and that legendary RaceFace toughness baked right in. Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight Four bolt bar clamp holds bar securely in position Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts Faceplate eliminates 'stress risers' which can cause your bar to bend or break Item Specifications Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Length 40 Material Aluminum S.H.I.S. Stem Clamp Diameter 28.6 Stem Angle (deg) 0 RaceFace Chester 35 Stem Stems UPC: 821973281421
Mpn: ST16CHE3540X0BLKby RaceFace
-
Race Face Half Nelson Lock-On Grips Black Pair
—$26.99
RaceFace Half Nelson Lock-On Grips Super-slim profile Race Face MX style half waffle for extra grip security Topographical moisture channels Compatible with ODI lock jaw clamps Item Specifications Color Black Unit of Sale Pair Weight 93g Length 134mm Flange No Defined Color Black RaceFace Half Nelson Grip UPC: 821973194950
Mpn: AC990057by RaceFace
-
RaceFace Narrow Wide Chainring: Direct Mount CINCH, 32t, Steel, Black
—$19.99
Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders. Steel Construction Compatible with 9, 10, 11 and 12-speed (excluding Shimano 12-speed chains) Narrow Wide tooth profiling ensures consistent chain retention Lockring installed/removed with ISIS BB tool Stiff 4mm plate thickness to transfer loads without flexing Item Specifications Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Steel Offset 3 Round or Oval Round Tooth Count 32 RaceFace Narrow Wide Direct Mount CINCH Chainring Direct Mount Chainrings UPC: 821973330501
Mpn: RNWDM32STBLKby RaceFace
-
RaceFace CINCH BB92 Bottom Bracket: 41mm ID x 92mm Shell x 30mm Spindle, Double Row Bearing, External Seal
—$74.99
Race Face bottom brackets for use with 30mm spindle cranksets in the Race Face CINCH crank family. Double seals for extra protection from the elements Allows the use of a CINCH 30mm spindle crankset with Shimano press fit shells Installed using a standard bearing press tool Includes inner plastic sleeve and spacer; additional BB fitments can be accommodated with CINCH spacer kits Item Specifications BB/Frame Interface BB86/BB92 Spindle Interface Type 386 EVO BB Shell Width (mm) 89.5/92 Spindle Interface Type e*Thirteen P3 Connect Bottom Bracket Shell I.D. 41 Defined Color Black Spindle Interface Type RaceFace/Easton CINCH Spindle Interface Type Rotor 3D+ Spindle Interface Type Zipp Vuma RaceFace CINCH Bottom Bracket Bottom Brackets UPC: 821973349480
Mpn: BB19BB899230DRby RaceFace
-
RaceFace Aeffect Crankset - 165mm, Direct Mount CINCH, RaceFace EXI Spindle Interface, Black
—$119.99
The Race Face Aeffect crank is designed to handle aggressive trail riding at XC crank weight and an attractive pricepoint. Features the CINCH system with its interchangeable spider options and a 24mm EXI interface spindle. Direct mount chainline: 51mm / 57.5mm (Flipped Ring) 2X Cinch spider chainline: 49.5mm Boost 2X Cinch spider chainline: 52.5mm Crank arms forged from 6066 aluminum Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards including: direct mount, 1x, 2x with and without bash, and 3x configurations 24mm EXI spindle compatible with Race Face X-Type bottom brackets or Hollowtech II compatible bottom brackets CINCH removable spiders and direct mount rings require a 20-tooth ISIS cup BB tool for removal and installation Item Specifications BB Included No Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 141/148 Boost Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainring BCD Direct Mount CINCH Color Black Crank Intended Use Mountain Crank Length (mm) 165 Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search RXC137 Number of Chainrings No Rings, No Spider Included Pedal Spindle 9/16" Rings Sold Separately Spindle Interface Type RaceFace EXI Spindle Interface Type Shimano Hollowtech II RaceFace Aeffect Crankset Crankset UPC: 821973340661
Mpn: CK19AE137ARM165BLKby RaceFace
-
RaceFace Narrow Wide Chainring: 104mm BCD, 32t, Black
—$44.99
RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH and everything in-between. Non-threaded bolt holes 7075-T6 aluminum, aerospace grade strength Compatible with 9, 10, 11 and 12 speed Stiff 4mm plate thickness and I-beam construction transfer loads without flexing Reversible laser etched graphics Item Specifications Chainring BCD 104 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Ring Position/Type Chain Retaining Single Ring Tooth Count 32 RaceFace Narrow Wide Chainring Chainring UPC: 821973330617
Mpn: RNW104X32BLKby RaceFace
-
RaceFace Ride Pedals - Platform, Composite, 9/16", Black
—$39.99
The RaceFace Ride pedal features a slim nylon composite platform, and offers a concave and lightweight design for legitimate performance. Molded traction pins give you all the grip you need without risk of damaging your shoes or shins Durable Cro-Mo steel axle features a standard 9/16 pedal thread and serviceable internal parts Item Specifications Color Black Defined Color Black Pedal Body Material Composite Pedal Spindle 9/16" Pedal Type Platform Spindle Material Chromoly Weight 320 RaceFace Ride Pedal Pedals UPC: 821973353111
Mpn: PD20RIDBLKby RaceFace
-
RaceFace Turbine, Next XC, SIXC and 2008+ Deus Crank Bolt/Puller
—$10.95
RaceFace Crank Arm Fixing Bolts RaceFace Crank Arm Fixing Bolts Crank Arm Fixing Bolt UPC: 821973121611
Mpn: F30018by RaceFace
-
RaceFace Narrow Wide Chainring: Direct Mount CINCH, 28t, Steel, Black
—$19.99
Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders. Steel Construction Compatible with 9, 10, 11 and 12-speed (excluding Shimano 12-speed chains) Narrow Wide tooth profiling ensures consistent chain retention Lockring installed/removed with ISIS BB tool Stiff 4mm plate thickness to transfer loads without flexing Item Specifications Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Steel Offset 3 Round or Oval Round Tooth Count 28 RaceFace Narrow Wide Direct Mount CINCH Chainring Direct Mount Chainrings UPC: 821973330440
Mpn: RNWDM28STBLKby RaceFace
-
Race Face Ride XC Seatpost, 30.9 x 375mm Black
—$34.99
RaceFace Ride XC Seatposts made of forged AL-6061. 2-bolt head holds saddle securely while retaining easy adjustability Forged, anodized and shot peened AL-6061 mast Item Specifications Color Black Weight 295g Length 375mm Material AL-6061 Seatpost Diameter 30.9mm Offset 0mm Minimum Height 45mm Max Height 275mm Seatpost Type Rigid Clamp Style Std Rails Defined Color Black RaceFace Ride XC Seatpost Seatpost UPC: 821973188157
Mpn: SP12RX30.9X375BLKby RaceFace
-
RaceFace Chainring Bolt/Nut Pack, 8x8.5mm 4-Pack
—$8.78
RaceFace Chainring BoltsSteel Item Specifications Color Black Length 8.5 Material Steel RaceFace Chainring Bolts Chainring Bolt UPC: 821973065441
Mpn: A10060by RaceFace
-
RaceFace NEXT R 35 Carbon Riser Handlebar: 35 x 800mm 20mm Rise Black/Silver
—$179.99
The Next R handlebar features 800mm of premium unidirectional carbon with shred-ready positioning. DH strength and Enduro weight for when you really need to lean into it. 35mm bar diameter for strength/weight ratio Manufactured from UD Carbon with matte clearcoat Carbon optimized flex for improved small bump compliance Item Specifications Color Black Weight 215 Width 800 Bar Clamp Diameter 35.0 Material Carbon Defined Color Black Upsweep 5 Back Sweep (deg) 8 Rise 20 RaceFace Next R Flat/Riser Handlebar UPC: 821973318103
Mpn: HB18NXR2035X800P877by RaceFace
-
Race Face Small Crank Boots, 2-Pack Blue
—$14.99
Race Face Crank Boot protects the crank arm from rocks and debris Fits from Race Face: Turbine, Atlas, Evolve and Ride Cranks Fits from Shimano: XT, SLX, Deore Cranks Fits from SRAM: X1 (Alloy), X9, X7, X5, S1400, S1000, S800 Cranks Check out our FAQ here to help figure out which crank boots are right for your cranks RaceFace Crank Boots - For Alloy Crank Part UPC: 895428020170
Mpn: A10068BLUby RaceFace
-
Race Face Half Nelson Lock-On Grip Blue
—$26.99
RaceFace Half Nelson Lock-On Grips Super-slim profile Race Face MX style half waffle for extra grip security Topographical moisture channels Compatible with ODI lock jaw clamps Item Specifications Color Blue Unit of Sale Pair Weight 93g Length 134mm Flange No Defined Color Blue RaceFace Half Nelson Grip UPC: 821973195056
Mpn: AC990058by RaceFace
-
RaceFace Stash Tool Wrap - Black, One-Size
—$20
Stash Tool Wrap keeps the essentials with you on the trail. Item Specifications Attachment Method Straps Color Black RaceFace Stash Seat Bag UPC: 821973375519
Mpn: RFNB087000by RaceFace
-
RaceFace Aeffect R 35 Handlebar: 35 x 780mm 20mm Rise Black
—$54.99
The Race Face Aeffect handlebar is an budget-friendly alloy bar intended for XC and Trail use. The most affordable option for riders looking for a 35mm handlebar. 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance Manufactured from cold drawn, seamless aluminum Shot-peened to increase fatigue resistance Item Specifications Back Sweep (deg) 9 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Aluminum Rise 20 Upsweep 5 Weight 345 Width 780 RaceFace Aeffect Flat/Riser Handlebar UPC: 821973309422
Mpn: HB17AER2035X780BLKby RaceFace
-
RaceFace Narrow Wide Chainring: Direct Mount CINCH, 30t, Black
—$69.99
Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders. Compatible with 9, 10, 11 and 12-speed (excluding Shimano 12-speed chains) Narrow Wide tooth profiling ensures consistent chain retention Lockring installed/removed with ISIS BB tool Stiff 4mm plate thickness to transfer loads without flexing Item Specifications Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Round or Oval Round Tooth Count 30 RaceFace Narrow Wide Direct Mount CINCH Chainring Direct Mount Chainrings UPC: 821973329765
Mpn: RNWDM30BLKby RaceFace
-
RaceFace Turbine R Riser Handlebar: 35 x 800mm 35mm Rise Black
—$89.99
Turbine R Handlebar Manufactured from cold drawn, 7075 Aluminium 35 optimized triple butted design Stealth black on black decals to match every frame color Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Aluminum Rise 35 Upsweep 5 Weight 300 Width 800 RaceFace Turbine R Flat/Riser Handlebar UPC: 821973318288
Mpn: HB18TURR3535X800BLK7Cby RaceFace
-
Race Face Ride XC Bicycle Stem, 60mm +/- 6 degree Black for 1-1/8 (28.6) Steerer
—$29.99
The Ride stem is designed specifically for riders looking for Race Face engineering and quality at a value price point. Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight Four bolt bar clamp holds bar securely in position Machined logo on bar clamp Item Specifications Color Black Weight 175g Intended Use Mountain Bar Clamp Diameter 31.8mm Stem Angle 84,96deg Stem Length 60mm Defined Color Black S.H.I.S. Clamp Diameter 28.6 RaceFace Ride XC Stem Stems UPC: 821973186924
Mpn: ST12RX31.860X6BLKby RaceFace
-
Race Face NEXT 35 Riser Carbon Handlebar: 35 x 760mm 20mm Rise Stealth
—$179.99
The Race Face Next handlebar is the lightest bar in the Race Face lineup. Manufactured from unidirectional carbon, the Next is intended for XC, Trail and All Mountain use. Reinforced stem anti-crush zone 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance Item Specifications Color Stealth Weight 175 Width 760 Bar Clamp Diameter 35.0 Material Carbon Defined Color Black Upsweep 4 Back Sweep (deg) 8 Rise 20 RaceFace Next Flat/Riser Handlebar UPC: 821973268835
Mpn: HB13NX2035X760STEby RaceFace
-
Race Face Small Crank Boots, 2-Pack Red, for Alloy Cranks
—$11.99
Race Face Crank Boot protects the crank arm from rocks and debris Fits from Race Face: Turbine, Atlas, Evolve and Ride Cranks Fits from Shimano: XT, SLX, Deore Cranks Fits from SRAM: X1 (Alloy), X9, X7, X5, S1400, S1000, S800 Cranks Check out our FAQ here to help figure out which crank boots are right for your cranks RaceFace Crank Boots - For Alloy Crank Part UPC: 895428020194
Mpn: A10068REDby RaceFace
-
Race Face Aeffect 35 Handlebar: 35 x 760mm 20mm Rise Black
—$49.99
The Race Face Aeffect handlebar is an budget-friendly alloy bar intended for XC and Trail use. The most affordable option for riders looking for a 35mm handlebar. 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance Manufactured from cold drawn, seamless aluminum Shot-peened to increase fatigue resistance Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Material Aluminum Rise 20 Upsweep 5 Weight 335 Width 760 RaceFace Aeffect Flat/Riser Handlebar UPC: 821973280783
Mpn: HB16AE2035X760BLKby RaceFace
-
RaceFace Narrow Wide Chainring: Direct Mount CINCH, 32t, Black
—$74.99
Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders. Compatible with 9, 10, 11 and 12-speed (excluding Shimano 12-speed chains) Narrow Wide tooth profiling ensures consistent chain retention Lockring installed/removed with ISIS BB tool Stiff 4mm plate thickness to transfer loads without flexing Item Specifications Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Round or Oval Round Tooth Count 32 RaceFace Narrow Wide Direct Mount CINCH Chainring Direct Mount Chainrings UPC: 821973329772
Mpn: RNWDM32BLKby RaceFace
-
Race Face Small Crank Boots, 2-Pack Turquoise, for Alloy Cranks
—$11.99
Race Face Crank Boot protects the crank arm from rocks and debris Fits from Race Face: Turbine, Atlas, Evolve and Ride Cranks Fits from Shimano: XT, SLX, Deore Cranks Fits from SRAM: X1 (Alloy), X9, X7, X5, S1400, S1000, S800 Cranks Check out our FAQ here to help figure out which crank boots are right for your cranks RaceFace Crank Boots - For Alloy Crank Part UPC: 895428020200
Mpn: A10068TURQby RaceFace
-
Race Face Small Crank Boots, 2-Pack Gray
—$14.99
Race Face Crank Boot protects the crank arm from rocks and debris Fits from Race Face: Turbine, Atlas, Evolve and Ride Cranks Fits from Shimano: XT, SLX, Deore Cranks Fits from SRAM: X1 (Alloy), X9, X7, X5, S1400, S1000, S800 Cranks Check out our FAQ here to help figure out which crank boots are right for your cranks RaceFace Crank Boots - For Alloy Crank Part UPC: 895428020187
Mpn: A10068GRYby RaceFace
-
RaceFace Narrow Wide Chainring: 104mm BCD, 30t, Black
—$49.99
RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH and everything in-between. 30t Narrow-Wide single rings are threaded with a standard M8 x 0.75 chainring bolt thread 7075-T6 aluminum, aerospace grade strength Compatible with 9, 10, 11 and 12 speed Stiff 4mm plate thickness and I-beam construction transfer loads without flexing Reversible laser etched graphics Item Specifications Chainring BCD 104 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 9 Ring Position/Type Chain Retaining Single Ring Tooth Count 30 RaceFace Narrow Wide Chainring Chainring UPC: 821973329857
Mpn: RNW104X30BLKby RaceFace
-
RaceFace Crank Boots: For Next SL G4 Cranks, 2-Pack Black
—$14.99
RaceFace Crank Boots protect the Next SL G4 crank arms from rocks and debris. Check out our FAQ here to help figure out which crank boots are right for your cranks RaceFace Crank Boots - For Next SL G4 Crank Part UPC: 821973299617
Mpn: A10096BLKby RaceFace
-
RaceFace Chain Stay Pad: Regular, Black
—$14.95
Protective pad for your chainstay prevents damage and scratches.Soft pad with RaceFace logos Item Specifications Color Black RaceFace Chain Stay Pad Chainstay/Frame Protection UPC: 821973285832
Mpn: FA640407by RaceFace
-
RaceFace Narrow Wide Chainring: Direct Mount CINCH, 30t, Steel, Black
—$19.99
Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders. Steel Construction Compatible with 9, 10, 11 and 12-speed (excluding Shimano 12-speed chains) Narrow Wide tooth profiling ensures consistent chain retention Lockring installed/removed with ISIS BB tool Stiff 4mm plate thickness to transfer loads without flexing Item Specifications Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Steel Offset 3 Round or Oval Round Tooth Count 30 RaceFace Narrow Wide Direct Mount CINCH Chainring Direct Mount Chainrings UPC: 821973329970
Mpn: RNWDM30STBLKby RaceFace
-
Race Face Chester Stem: 50mm +/- 8 degree Black
—$54.99
The Chester Stem is a practical stem with big bold graphics and that legendary RaceFace toughness baked right in. Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight Four bolt bar clamp holds bar securely in position Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts Faceplate eliminates 'stress risers' which can cause your bar to bend or break Item Specifications Bar Clamp Diameter (mm) 31.8 Color Black Defined Color Black Length 50 Material Aluminum S.H.I.S. Stem Clamp Diameter 28.6 Stem Angle (deg) +8 Stem Angle (deg) -8 RaceFace Chester 35 Stem Stems UPC: 821973195926
Mpn: ST12CHE31.850X8BLKby RaceFace
-
Race Face Ride XC Seatpost, 31.6 x 375mm Black
—$34.99
RaceFace Ride XC Seatposts made of forged AL-6061. 2-bolt head holds saddle securely while retaining easy adjustability Forged, anodized and shot peened AL-6061 mast Item Specifications Color Black Weight 295g Length 375mm Material AL-6061 Seatpost Diameter 31.6mm Offset 0mm Minimum Height 45mm Max Height 275mm Seatpost Type Rigid Clamp Style Std Rails Defined Color Black RaceFace Ride XC Seatpost Seatpost UPC: 821973188164
Mpn: SP12RX31.6X375BLKby RaceFace
-
Race Face Atlas Cinch Crank Arm Set: 170mm Black
—$189.99
The Race Face Atlas crank is the burliest alloy CINCH offering; designed to excel across many disciplines including trail, enduro, DH and freeride. Featuring the versatile CINCH interface for interchangeable spiders, limitless ring combinations, a 30mm alloy spindle and compatibility across all relevant frame standards. Bottom bracket, direct mount ring and spider not included Direct mount chainline: 48.5mm / 55mm (Flipped Ring) 2X Cinch spider chainline: 47mm Boost 2X Cinch spider chainline: 50mm Crank arms forged from 7050 aluminum with a bracing matrix for added stiffness Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards including: direct mount, 1x, 2x with and without bash, and 3x configurations CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS cup BB tool for removal and installation 30mm spline interface CNC'd from aluminum super alloy Item Specifications BB Included No Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainring BCD Direct Mount CINCH Color Black Crank Intended Use Mountain Crank Length (mm) 170 Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search RF131BM Number of Chainrings No Rings Included Pedal Spindle 9/16" Rings Sold Separately Spindle Interface Type RaceFace/Easton CINCH Weight 690 RaceFace Atlas CINCH Crankset Crankset UPC: 821973281018
Mpn: CK16AA170BLKby RaceFace
-
RaceFace Aeffect Crankset - 170mm, Direct Mount CINCH, RaceFace EXI Spindle Interface, Black
—$119.99
The Race Face Aeffect crank is designed to handle aggressive trail riding at XC crank weight and an attractive pricepoint. Features the CINCH system with its interchangeable spider options and a 24mm EXI interface spindle. Direct mount chainline: 51mm / 57.5mm (Flipped Ring) 2X Cinch spider chainline: 49.5mm Boost 2X Cinch spider chainline: 52.5mm Crank arms forged from 6066 aluminum Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards including: direct mount, 1x, 2x with and without bash, and 3x configurations 24mm EXI spindle compatible with Race Face X-Type bottom brackets or Hollowtech II compatible bottom brackets CINCH removable spiders and direct mount rings require a 20-tooth ISIS cup BB tool for removal and installation Item Specifications BB Included No Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 141/148 Boost Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainring BCD Direct Mount CINCH Color Black Crank Intended Use Mountain Crank Length (mm) 170 Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 keyword search RXC137 Number of Chainrings No Rings, No Spider Included Pedal Spindle 9/16" Rings Sold Separately Spindle Interface Type RaceFace EXI Spindle Interface Type Shimano Hollowtech II RaceFace Aeffect Crankset Crankset UPC: 821973340678
Mpn: CK19AE137ARM170BLKby RaceFace
-
RaceFace Aeffect R Crankset - 175mm, Direct Mount CINCH, RaceFace EXI Spindle Interface, Black
—$134.99
The RaceFace Aeffect R crankset offers enduro-rated strength in a lightweight XC-style package, making it a solid and dependable crankset choice. Direct mount chainline: 51mm / 57.5mm (Flipped Ring) 2X Cinch spider chainline: 49.5mm Boost 2X Cinch spider chainline: 52.5mm Its forged 7050 AL construction optimizes stiffness without added weight The Aeffect R features the versatile CINCH system for plenty of interchangeable spider options Can run alloy or steel CINCH direct mount chainrings Boost compatible 24mm EXI interface spindle Item Specifications BB Included No Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 141/148 Boost Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainring BCD Direct Mount CINCH Color Stealth Crank Intended Use Mountain Crank Length (mm) 175 Defined Color Black keyword search RXC137 Number of Chainrings No Rings, No Spider Included Pedal Spindle 9/16" Rings Sold Separately Spindle Interface Type RaceFace EXI RaceFace Aeffect R Crankset Crankset UPC: 821973354330
Mpn: CK20AER137ARM175BLKby RaceFace
-
RaceFace Atlas 35 Riser Handlebar, 35 x 820mm 35mm Rise Kash Money
—$89.99
Atlas 35 Handlebar Manufactured from cold drawn, 7075 Aluminium 35 optimized triple butted design Item Specifications Back Sweep (deg) 8 Bar Clamp Diameter (mm) 35.0 Color Kash Money Defined Color Gold Material Aluminum Rise 35 Upsweep 5 Weight 300 Width 820 RaceFace Atlas 35 Flat/Riser Handlebar UPC: 821973340050
Mpn: HB19A3535X820GLDby RaceFace
-
Race Face Chester 35 Riser Handlebar: 35 x 780mm 20mm Rise Black
—$54.99
The Race Face Chester handlebar is a budget-friendly alloy option designed for the rowdiest riding. Intended for Enduro, Downhill and Freeride applications. Shot-peened to increase fatigue resistance Cold-drawn and seamless 6061 aluminum 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance Item Specifications Color Black Width 780 Bar Clamp Diameter 35.0 Material Aluminum Defined Color Black Rise 20 RaceFace Chester Flat/Riser Handlebar UPC: 821973281285
Mpn: HB16CHE2035X780BLKby RaceFace
-
RaceFace Narrow Wide Oval Chainring: Direct Mount CINCH, 30t, Black
—$64.99
Cinch Oval rings help you put down the watts in the best part of our pedal stroke, on your 10, 11 or 12 speed drivetrains. Ovals provide enhanced traction control when compared to conventional round rings, particularly in high torque, low cadence riding scenarios. We ve got your timing clocked to improve on that grueling climb. Or simply make your personal pedal-shuttle a little more bearable. And by simply flipping the ring, it becomes Super Boost compatible without losing the same excellent timing to help you maintain traction during the toughest part of your push Optimized pedal stroke 1x drivetrain variable width tooth profile stops dropped chains Super Boost compatible Wear resistant 7075 Aluminium Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 141/148 Boost Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainline/Hub Compatibility 170/177 Hubs Chainline/Hub Compatibility 190/197 Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 30 RaceFace Narrow Wide Oval Direct Mount Chainring Direct Mount Chainrings UPC: 821973339368
Mpn: RNWDMOVAL30BLKby RaceFace
-
RaceFace Turbine Crankset - 165mm, Direct Mount, 136mm Spindle with CINCH Interface, 7050 Aluminum, Black
—$179.99
The RaceFace Turbine crank is designed as the performance-oriented alloy crank for XC, trail and enduro applications. As the lightest alloy option in the CINCH lineup, the Turbine allows for interchangeable spiders, limitless ring combinations, a 30mm alloy spindle and compatibility across all relevant frame standards. Cranks and spindle are crafted with high-end 7050 aluminum for strength and light weight Q-Factor: 175mm Direct mount chainline: 52mm / 58.5mm (Flipped Ring) Chainring sold separately Aluminum crank arms are deep pocket forged for maximum strength and then CNC machined to shave every unnecessary gram of weight Item Specifications BB Included No Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 141/148 Boost Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainring BCD Direct Mount CINCH Color Black Crank Intended Use Mountain Crank Length (mm) 165 Defined Color Black Drivetrain Speeds 11 Drivetrain Speeds 12 Number of Chainrings No Rings Included Pedal Spindle 9/16" Rings Sold Separately Spindle Interface Type RaceFace Cinch 30mm RaceFace Turbine CINCH Crankset Crankset UPC: 821973416595
Mpn: CK22TUR136ARM165BLKby RaceFace
1 2 3 … 13 Next »
Race Face Small Crank Boots, For Alloy Cranks, 2-Pack Black
Race Face Team X-Type External Bottom Bracket, 68/73
RaceFace CINCH Bottom Bracket: BSA 73mm Shell x 30mm Spindle, External Seal
Race Face Chester 35 Riser Handlebar: 35 x 780mm 35mm Rise Black
RaceFace Turbine R 35 Stem - 32mm, 35 mm Clamp, +/-0, 1 1/8", Black
Race Face Large Crank Boots, 2-Pack (pair) Black Carbon Bicycle Cranks
RaceFace Turbine R 35 Stem - 40mm, 35 mm Clamp, +/-0, 1 1/8", Black
Race Face Chester Handlebar: 31.8 x 740mm 1" Rise, Black
RaceFace Turbine R 35 Stem - 50mm, 35 mm Clamp, +/-0, 1 1/8", Black
RaceFace 8-16mm Hex Adaptor Tool
RaceFace Aeffect R 35 Stem - 40mm, 35 Clamp, +/-0, 1 1/8", Aluminum, Black
Race Face CINCH Wrench Bottom Bracket Tool 30mm BSA BB Black
Race Face Chester 35 Stem: 40mm x 35mm +/- 0 degree Black
Race Face Half Nelson Lock-On Grips Black Pair
RaceFace Narrow Wide Chainring: Direct Mount CINCH, 32t, Steel, Black
RaceFace CINCH BB92 Bottom Bracket: 41mm ID x 92mm Shell x 30mm Spindle, Double Row Bearing, External Seal
RaceFace Aeffect Crankset - 165mm, Direct Mount CINCH, RaceFace EXI Spindle Interface, Black
RaceFace Narrow Wide Chainring: 104mm BCD, 32t, Black
RaceFace Ride Pedals - Platform, Composite, 9/16", Black
RaceFace Turbine, Next XC, SIXC and 2008+ Deus Crank Bolt/Puller
RaceFace Narrow Wide Chainring: Direct Mount CINCH, 28t, Steel, Black
Race Face Ride XC Seatpost, 30.9 x 375mm Black
RaceFace Chainring Bolt/Nut Pack, 8x8.5mm 4-Pack
RaceFace NEXT R 35 Carbon Riser Handlebar: 35 x 800mm 20mm Rise Black/Silver
Race Face Small Crank Boots, 2-Pack Blue
Race Face Half Nelson Lock-On Grip Blue
RaceFace Stash Tool Wrap - Black, One-Size
RaceFace Aeffect R 35 Handlebar: 35 x 780mm 20mm Rise Black
RaceFace Narrow Wide Chainring: Direct Mount CINCH, 30t, Black
RaceFace Turbine R Riser Handlebar: 35 x 800mm 35mm Rise Black
Race Face Ride XC Bicycle Stem, 60mm +/- 6 degree Black for 1-1/8 (28.6) Steerer
Race Face NEXT 35 Riser Carbon Handlebar: 35 x 760mm 20mm Rise Stealth
Race Face Small Crank Boots, 2-Pack Red, for Alloy Cranks
Race Face Aeffect 35 Handlebar: 35 x 760mm 20mm Rise Black
RaceFace Narrow Wide Chainring: Direct Mount CINCH, 32t, Black
Race Face Small Crank Boots, 2-Pack Turquoise, for Alloy Cranks
Race Face Small Crank Boots, 2-Pack Gray
RaceFace Narrow Wide Chainring: 104mm BCD, 30t, Black
RaceFace Crank Boots: For Next SL G4 Cranks, 2-Pack Black
RaceFace Chain Stay Pad: Regular, Black
RaceFace Narrow Wide Chainring: Direct Mount CINCH, 30t, Steel, Black
Race Face Chester Stem: 50mm +/- 8 degree Black
Race Face Ride XC Seatpost, 31.6 x 375mm Black
Race Face Atlas Cinch Crank Arm Set: 170mm Black
RaceFace Aeffect Crankset - 170mm, Direct Mount CINCH, RaceFace EXI Spindle Interface, Black
RaceFace Aeffect R Crankset - 175mm, Direct Mount CINCH, RaceFace EXI Spindle Interface, Black
RaceFace Atlas 35 Riser Handlebar, 35 x 820mm 35mm Rise Kash Money
Race Face Chester 35 Riser Handlebar: 35 x 780mm 20mm Rise Black
RaceFace Narrow Wide Oval Chainring: Direct Mount CINCH, 30t, Black
RaceFace Turbine Crankset - 165mm, Direct Mount, 136mm Spindle with CINCH Interface, 7050 Aluminum, Black
RaceFace is one of the larger component brands you will find for mountain bikes. You can find some RaceFace parts on all sorts of bikes like cross country bikes, trail, enduro, downhill and dirt jumpers. With a various options in Handlebars & Grips, Stems, Cranksets & Bottom Brackets, Pedals and Wheelsets, you can pretty much outfit your bike with as much RaceFace product as you want.
One of their top selling stems is the Turbine R stem, featured in our Top MTB Stem Video, its offered in multiple lengths and colors to fit on your bike. Another stand out product from RaceFace are the Next SL Crankset, one of the lightest carbon cranksets on the market and we have always been a fan of these throughout the years.
A newer product for RaceFace but coming in with lots of praise are the Next R Carbon wheels, with a full review, we have only great things to say about them from the solid warranty, to the high engagement hubs with huge oversized bearings for both performance and quality. If you are looking for solid parts with a ton of color options, RaceFace is your one stop shop for quality mountain bike components.
If you have any questions about what parts will work with your bike, contact our customer service team, or call at (805) 375-4525.
--- Shop Info ---
Newsletter Signup -
© 2024 Worldwide Cyclery
