- Shop
- Bikes / Frames
-
Components
- Tires / Tubes / Sealant / Valves
- Forks / Parts
- Rear Shocks / Parts
- Groupsets / Drivetrain Bundles
- Drivetrain
- Shifters
- Handlebars / Grips
- Stems
- Brakes / Pads / Adaptors
- Seatposts / Clamps / Levers
- Saddles / Seats
- Pedals / Cleats / Parts
- Wheels / Hubs / Rims
- Headsets / Parts
- Cables / Housing
-
Accessories
- Tools / Lube / Solvents
- Car / Truck Racks / Tailgate Pads
- Frame Straps
- Pumps / Inflation
- Chainstay / Frame Protectors / Fenders
- Computers / GPS / Electronics
- Hydration Packs / Bags
- Lights
- Water Bottles / Cages
- Gift Ideas / Novelties
- Indoor Trainers
- Bike Travel / Shipping Cases
- Nutritionals
- Locks
- Storage Racks / Stands
-
Apparel
- Helmets
- Jerseys
- Shorts / Bibs
- Gloves
- Shoes / Socks
- Pads / Protective Gear
- Pants
- Eyewear
- Chamois / Short Liners / Base Layer
- Chamois Creams / Embrocations / Butt'r
- Jackets / Vests / Hoodies / Flannels
- Casual Wear
- Headwear
- Brands
- Top Secret Sales (Do Not Tell!)
- Watch
- Read
- My Account
- Help / FAQ's
- Contact Us / Locations
- Call Us | 1-805-375-4525
- Why Shop With Us?
- About Us
- Continue Shopping
- Your Cart is Empty
Pedal Small Parts
-
RaceFace Chester Pedal Pin Kit, 20 Pins Black
—$9.99
Pedal Pin kit for Raceface Chester Pedals This pedal pin kit contains 20 sets of bolts/nuts for your Raceface Chester pedals. This pack is enough for 1 pedal to fully replace the pins. You've got 16 pins per pedal so you'll have a few spares. Hopefully you don't need to use all of the pins! If you're replacing all of the pins for both pedals pick up 2 packs of these and you'll be left with some spares. RaceFace Pin Kits Pedal Small Part UPC: 821973293967
Mpn: F11006RFby RaceFace
-
Crank Brothers Shoe Shields
—$10.49
Crank Brothers Pedal Small Parts Crank Brothers Shoe Shields Pedal Small Part UPC: 641300670007
Mpn: 10000by Crank Brothers
-
Crank Brothers Flat/Mallet Pin Kit 10mm: Black
—$13.50
Traction pin kit for the Stamp, Mallet, and 5050 pedals. Includes 50 pins Thread lock pre-applied Crank Brothers Pin Kit Pedal Small Part UPC: 641300138903
Mpn: 13890by Crank Brothers
-
Crank Brothers Pedal Refresh Kit: Stamp 7 and 11
—$24.99
Crank Brothers Pedal Rebuild Kits.One kit rebuilds 2 pedals Crank Brothers Rebuild Kits Pedal Small Part UPC: 641300162731
Mpn: 16273by Crank Brothers
-
Crank Brothers Pedal Refresh Kit for 2010 - current pedal line
—$29.99
Crank Brothers Pedal Rebuild Kits. Rebuild kit includes: bearing extraction tool, enduro cartridge bearings, igus bearings, double lip seals, external seals, spindle nuts, end caps and o-rings Kit can be used to upgrade the internals of model year 2010-2015 pedals One kit repairs two pedals One kit rebuilds 2 pedals Crank Brothers Rebuild Kits Pedal Small Part UPC: 641300160515
Mpn: 16051by Crank Brothers
-
Race Face Aeffect Pedal Rebuild Kit
—$24.99
The RaceFace Aeffect Pedal Rebuild Kit includes bearings, seals and axle end cap/bolt. RaceFace Rebuild Kits Pedal Small Part UPC: 895428019433
Mpn: F11004RFby RaceFace
-
Race Face Atlas/Aeffect Pedal Pin Kit
—$15.60
Pin and washer kit for Race Face platform Pedals Color: Black RaceFace Pin Kits Pedal Small Part UPC: 895428019426
Mpn: F11003RFby RaceFace
-
Race Face Atlas Pedal Bearing Rebuild Kit
—$49.99
-Includes bearings, seals, axle end cap/bolt, and bearing press. RaceFace Rebuild Kits Pedal Small Part UPC: 895428019402
Mpn: F11001RFby RaceFace
-
Crank Brothers Long Spindle Kit for 2010 - Present Pedal Models
—$49.99
Spindles are each 5mm longer than Crank Brother's standard spindles to provide a wider Q-factor. Compatible with 2010 - present Egg Beater, Candy, Mallet, 5050 and Double Shot pedals Includes 2 long spindles, and premium internal components Crank Brothers Long Spindle Kits Pedal Small Part UPC: 641300160676
Mpn: 16067by Crank Brothers
-
DMR Vault Pedal Service Kit, Pair
—$34
Part kits needed to service DMR pedal internals. 2 sealed bearings 2 bushings Regular and reverse threaded nuts (one each) 2 end caps 2 washers For use with DMR Vault pedals only DMR Pedal Service Kits Pedal Small Part EAN: 5055308108939
Mpn: DMR-SVLT-KITby DMR
-
DMR Flip Pins for Vault Pedals 44 Piece Set Blue
—$18
DMR Pedal Small Parts Item Specifications Fits Vault DMR Flip Pin Set Pedal Small Part EAN: 5055308106645
Mpn: DMR-PIN-VAULT-Bby DMR
-
Spank Spike/Oozy/Spoon Pedal Pin Kit
—$10.80
Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip. Shorter 7mm rear load pins for the outer extremities of Spoon, Spike, and Oozy pedals provide durability, and improved safety Replacement pins for Spank pedals Spank Pedal Pin Kit Pedal Small Part EAN: 4717760767048
Mpn: 4P-PNK003-00-AMby Spank
-
RaceFace Chester Pedal Rebuild Kit
—$26.49
Rebuild kits for RaceFace pedals. RaceFace Rebuild Kits Pedal Small Part UPC: 821973293981
Mpn: F11008by RaceFace
-
DMR Flip Pins for Vault Pedals 44 Piece Set Black
—$18
DMR Pedal Small Parts Item Specifications Fits Vault DMR Flip Pin Set Pedal Small Part EAN: 5055308106652
Mpn: DMR-PIN-VAULT-Kby DMR
-
Spank Replacement Pedal Bushing Kit (Kit D)
—$10.80
REplacement bushing kits for Spank pedals. Two IGUS bushings, two seals and two washers for the outboard position of Spank Pedals (2011-Current) Eliminates play that can develop over time, and revives performance Spank Bushing Kits Pedal Small Part EAN: 4717760760650
Mpn: 4P-BBK003-00-AMby Spank
-
Crank Brothers Flat/Mallet Pin Kit 8mm: Black
—$14.40
Traction pin kit for the Stamp, Mallet, and 5050 pedals. Includes 50 pins Thread lock pre-applied Crank Brothers Pin Kit Pedal Small Part UPC: 641300138910
Mpn: 13891by Crank Brothers
-
DEITY Compound Pin Kit
—$11.40
Replacement pin kits for Deity pedals. Deity Components Pin Kit Pedal Small Part
Mpn: 26-COMP-PINSby Deity Components
-
Spank 2015-Current Replacement Pedal Bearing Kit (Kit B)
—$21.99
Replacement bearing kits for Spank pedals. Two bearings for the inboard position of Spank Pedals (2015-Current) Includes inboard dust seals Spank Bearing Kits Pedal Small Part EAN: 4717760764979
Mpn: 4P-BBK003-01-AMby Spank
-
DMR Flip Vault Pedal Pin Set 44pc Gold
—$18
These pedal pins come in two sizes and the longer pins can be used one of two ways for customizing grip. 16 short pins (8.5mm overall length) for pedal's center section 28 long pins (12.5mm overall length) for pedal's fore and aft edges 2mm allen wrench included Pin sizing works with any pedals that can utilize: M4x0.7x4 Can also be adjusted with 5mm wrench - not included DMR Flip Pin Set Pedal Small Part EAN: 5055308106959
Mpn: DMR-PIN-VAULT-GLDby DMR
-
Crank Brothers Pedal Refresh Kit: Egg Beater and Candy 11
—$29.99
Crank Brothers Pedal Rebuild Kits.One kit rebuilds 2 pedals Crank Brothers Rebuild Kits Pedal Small Part UPC: 641300162298
Mpn: 16229by Crank Brothers
-
DEITY Bladerunner/TMAC Rebuild Kit
—$33.03
ALL THE PARTS YOU NEED TO REBUILD A TMAC OR BLADERUNNER PEDAL (KIT IS ONLY FOR ONE PEDAL): Custom TMAC / BLADERUNNER Socket 3 High Quality Sealed bearings Split DU Bushing Black Outer Cap & Silver Inner Bearing Preload Cap Spindle washer and Dust cap (2) Locking Nylon Spindle nuts (1) Standard threaded for Non-Driveside (1) Reverse threaded for Driveside Deity Components Rebuild Kit Pedal Small Part
Mpn: 26-BLADE/TMAC-REBUILD-KITby Deity Components
-
DMR Moto X Pins for Vault Pedals, 44 Piece Set Black
—$22
Moto X Pins 44 pins in total 11mm overall length Either side can be used when installed in fore/aft pin positions of Vault pedals Pin sizing works with any pedals that can utilize: M4x0.7x4 Includes wrench DMR Moto X Pedal Small Part EAN: 5055308109929
Mpn: DMR-PIN-VAULT-MOTO-Kby DMR
-
DMR Kingpins for Vault Pedals 44 Piece Set Black
—$22
These pedal pins come in two sizes and the longer pins can be used one of two ways for customizing grip. King Pins are the longest pins available for the DMR Vault Pedals, at 1.5 mm longer than standard Vault Flip Pins Experiment alongside the Flip Pins and Moto Pins to get your ideal set up configuration 44 pins included (enough for 1 pair of Vaults) Allen key included for installation 16 short pins (8.5mm overall length) for pedal's center section 28 long pins (12.5mm overall length) for pedal's fore and aft edges 2mm allen wrench included Pin sizing works with any pedals that can utilize: M4x0.7x4 Can also be adjusted with 5mm wrench - not included DMR Flip Pin Set Pedal Small Part EAN: 5055308118389
Mpn: DMR-PIN-VAULT-KINGPINby DMR
-
DEITY TMAC Pin Kit
—$12.40
Replacement pin kits for Deity pedals. Deity Components Pin Kit Pedal Small Part
Mpn: 26-TMAC-PIN-KITby Deity Components
-
RaceFace Chester Pedal Spindle Kit, Left/Right
—$27.99
Replacement spindle kits for RaceFace pedals. RaceFace Spindle Kits Pedal Small Part UPC: 821973293974
Mpn: F11007RFby RaceFace
-
Shimano Ultegra PD-6700, 105 PD-5700 SPD-SL Pedal Right Side Axle Set
—$19.28
Shimano Pedal Small Parts Shimano Pedal Small Parts Pedal Small Part UPC: 689228327290
Mpn: Y45F98020by Shimano
-
Race Face Atlas Pedal Axle Kit
—$33.99
Replacement axle for Atlas pedal only RaceFace Spindle Kits Pedal Small Part UPC: 895428019419
Mpn: F11002RFby RaceFace
-
DEITY Black Kat Pin Kit
—$12.30
Replacement pin kits for Deity pedals. Deity Components Pin Kit Pedal Small Part
Mpn: 26-BKT-PINby Deity Components
-
DEITY Bladerunner Short Pin Kit
—$12.90
Replacement pin kits for Deity pedals. Deity Components Pin Kit Pedal Small Part
Mpn: 26-BLADE-S-PINSby Deity Components
-
Crank Brothers Pedal Refresh Kit: Stamp 2 and 3
—$24.99
Crank Brothers Pedal Rebuild Kits.One kit rebuilds 2 pedals Crank Brothers Rebuild Kits Pedal Small Part UPC: 641300164995
Mpn: 16499by Crank Brothers
-
Shimano Ultegra PD-6700, 105 PD-5700 SPD-SL Pedal Left Side Axle Set
—$18.75
Shimano Pedal Small Parts Shimano Pedal Small Parts Pedal Small Part UPC: 689228327306
Mpn: Y45F98030by Shimano
-
Crank Brothers Traction Pads for Egg Beater
—$13
Polyurethane Traction pads are engineered to optimize the interface between the pedal and shoe, for ultimate performance and power transfer. Includes 4 x 1mm sleeved traction pads Compatible with Egg Beater pedals Crank Brothers Traction Pads Pedal Small Part UPC: 641300165091
Mpn: 16509by Crank Brothers
-
DEITY Black Kat Rebuild Kit
—$16.95
Rebuild kits for Deity pedals. Deity Components Rebuild Kit Pedal Small Part
Mpn: 26-BKT-REBUILDby Deity Components
-
HT Components N-EVO+ Rebuild Kit - AE03/AE05/ME03
—$22
Rebuild kits for HT pedals. HT Components Pedal Rebuild Kit Pedal Small Part EAN: 4711126205977
Mpn: 136008100001by HT Components
-
DEITY Deftrap Standard Pin Kit
—$12.20
Replacement pin kits for Deity pedals. Deity Components Pin Kit Pedal Small Part
Mpn: 26-DF TRP-PIN KITby Deity Components
-
Crank Brothers Pedal Refresh Kit: Doubleshot 2 and 3
—$29.99
Crank Brothers Pedal Rebuild Kits.One kit rebuilds 2 pedals Crank Brothers Rebuild Kits Pedal Small Part UPC: 641300162748
Mpn: 16274by Crank Brothers
-
Crank Brothers Titanium Spindle Kit for 2010 - Present Pedal Models
—$179.99
The titanium spindle kit lowers the weight of any Crank Brothers pedal by 30+ grams. 200 pound rider weight limit. Compatible with 2010 - present Egg Beater, Candy, Mallet, 5050 and Double Shot pedals Includes 2 titanium spindles, and premium internal components Crank Brothers Ti Spindle Kits Pedal Small Part UPC: 641300160683
Mpn: 16068by Crank Brothers
-
HT Components X1-E Cleat Kit - 4 Degrees Float Multi
—$18
Cleat kits for HT pedals. HT Components Cleat Kit Pedal Small Part EAN: 4711126207261
Mpn: 127X1EXXX05302by HT Components
-
RaceFace Atlas 2022 Pedal Pin Kit
—$19.99
Replacement pin kits for RaceFace pedals. RaceFace Pin Kits Pedal Small Part UPC: 821973464237
Mpn: F11015RFby RaceFace
-
Crank Brothers Traction Pads for Mallet Enduro
—$14.99
Polyurethane Traction pads are engineered to optimize the interface between the pedal and shoe, for ultimate performance and power transfer. Compatible with Mallet Enduro pedals Includes 8 x 1mm traction pads and 8 x 2mm traction pads Crank Brothers Traction Pads Pedal Small Part UPC: 641300160584
Mpn: 16058by Crank Brothers
-
Crank Brothers Traction Pads for Candy 2/3 (Model 2017+)
—$9.99
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. Crank Brothers Traction Pads Pedal Small Part UPC: 641300162175
Mpn: 16217by Crank Brothers
-
Crank Brothers Traction Pads for Candy 7/11
—$14.99
Polyurethane Traction pads are engineered to optimize the interface between the pedal and shoe, for ultimate performance and power transfer. Compatible with Candy 7 and Candy 11 pedals Includes 8 x 1mm traction pads and 8 x 2mm traction pads Crank Brothers Traction Pads Pedal Small Part UPC: 641300160577
Mpn: 16057by Crank Brothers
-
HT Components X1-F Cleat Kit - 8 Degrees Float
—$18
Cleat kits for HT pedals. HT Components Cleat Kit Pedal Small Part EAN: 4711126203942
Mpn: 127X1FXXX01302by HT Components
-
HT Components S-T1 Rebuild Kit
—$20
Rebuild kits for HT pedals. HT Components Pedal Rebuild Kit Pedal Small Part EAN: 4711126207391
Mpn: 136005100003by HT Components
-
HT Components X2 Rebuild Kit
—$20
Rebuild kits for HT pedals. HT Components Pedal Rebuild Kit Pedal Small Part EAN: 4711126207384
Mpn: 136003100004by HT Components
-
HT Components Cromo Spindle for AE03 and AE05 Pedals, Silver
—$16
Replacement spindles for HT pedals.Sold as pairs HT Components Replacement Spindles Pedal Small Part EAN: 4715872485997
Mpn: 136EVO+AE03-111by HT Components
-
DEITY Deftrap Short Pin Kit
—$12.90
Replacement pin kits for Deity pedals. Deity Components Pin Kit Pedal Small Part
Mpn: 26-DF TRP-S PINSby Deity Components
-
DEITY Deftrap Pedal Rebuild Kit
—$15.30
Rebuild kits for Deity pedals. Deity Components Rebuild Kit Pedal Small Part
Mpn: 26-DF TRP-REBUILDby Deity Components
-
DEITY Bladerunner/TMAC Right Spindle
—$13.80
Replacement spindles for Deity pedals. Deity Components Spindle Pedal Small Part
Mpn: 26-BLADE//TMAC-R-SPINDLEby Deity Components
-
HT Components T1/X1/X2/M1/LX4 Hook Plates - T1/X1/X2/M1/LX4
—$16
Hook plates for HT pedals. HT Components Hook Plate Pedal Small Part EAN: 4711126205892
Mpn: 1360XX300002by HT Components
1 2 Next »
RaceFace Chester Pedal Pin Kit, 20 Pins Black
Crank Brothers Shoe Shields
Crank Brothers Flat/Mallet Pin Kit 10mm: Black
Crank Brothers Pedal Refresh Kit: Stamp 7 and 11
Crank Brothers Pedal Refresh Kit for 2010 - current pedal line
Race Face Aeffect Pedal Rebuild Kit
Race Face Atlas/Aeffect Pedal Pin Kit
Race Face Atlas Pedal Bearing Rebuild Kit
Crank Brothers Long Spindle Kit for 2010 - Present Pedal Models
DMR Vault Pedal Service Kit, Pair
DMR Flip Pins for Vault Pedals 44 Piece Set Blue
Spank Spike/Oozy/Spoon Pedal Pin Kit
RaceFace Chester Pedal Rebuild Kit
DMR Flip Pins for Vault Pedals 44 Piece Set Black
Spank Replacement Pedal Bushing Kit (Kit D)
Crank Brothers Flat/Mallet Pin Kit 8mm: Black
DEITY Compound Pin Kit
Spank 2015-Current Replacement Pedal Bearing Kit (Kit B)
DMR Flip Vault Pedal Pin Set 44pc Gold
Crank Brothers Pedal Refresh Kit: Egg Beater and Candy 11
DEITY Bladerunner/TMAC Rebuild Kit
DMR Moto X Pins for Vault Pedals, 44 Piece Set Black
DMR Kingpins for Vault Pedals 44 Piece Set Black
DEITY TMAC Pin Kit
RaceFace Chester Pedal Spindle Kit, Left/Right
Shimano Ultegra PD-6700, 105 PD-5700 SPD-SL Pedal Right Side Axle Set
Race Face Atlas Pedal Axle Kit
DEITY Black Kat Pin Kit
DEITY Bladerunner Short Pin Kit
Crank Brothers Pedal Refresh Kit: Stamp 2 and 3
Shimano Ultegra PD-6700, 105 PD-5700 SPD-SL Pedal Left Side Axle Set
Crank Brothers Traction Pads for Egg Beater
DEITY Black Kat Rebuild Kit
HT Components N-EVO+ Rebuild Kit - AE03/AE05/ME03
DEITY Deftrap Standard Pin Kit
Crank Brothers Pedal Refresh Kit: Doubleshot 2 and 3
Crank Brothers Titanium Spindle Kit for 2010 - Present Pedal Models
HT Components X1-E Cleat Kit - 4 Degrees Float Multi
RaceFace Atlas 2022 Pedal Pin Kit
Crank Brothers Traction Pads for Mallet Enduro
Crank Brothers Traction Pads for Candy 2/3 (Model 2017+)
Crank Brothers Traction Pads for Candy 7/11
HT Components X1-F Cleat Kit - 8 Degrees Float
HT Components S-T1 Rebuild Kit
HT Components X2 Rebuild Kit
HT Components Cromo Spindle for AE03 and AE05 Pedals, Silver
DEITY Deftrap Short Pin Kit
DEITY Deftrap Pedal Rebuild Kit
DEITY Bladerunner/TMAC Right Spindle
HT Components T1/X1/X2/M1/LX4 Hook Plates - T1/X1/X2/M1/LX4
--- Shop Info ---
Newsletter Signup -
© 2023 Worldwide Cyclery
