—$30

GREASE GUN WITH GREASE TUBE FULL 3.2 OZ Remember to grease it up to keep things running smoothly! Maintenance is an important part of keeping your bike running great. Use this grease to keep your Switch Infinity running smooth. Turq Grease Gun 3.2 OZ Grease Tube Yeti GREASE GUN Injector & Dispenser

by Yeti

—$90.95

High quality ratcheting "click-type" torque wrenches that accurately measure and apply the proper amount of torque to a component's threaded fastener(s). 2 14 Newton meter range (18 124 Inch Pounds) Adjustable in 0.4 Nm increments Ratcheting 3/8" drive Dial-adjust system allows desired torque setting to be preset Conversion scale on tool body Length: 22.9cm (9") Do not exceed 14 Nm when using the TW-5.2 Protective case included Torque wrenches are measuring instruments and are not intended for use as a general-purpose ratcheting driver Calibrated for accuracy to +/-4% Item Specifications Bits Included No Park Tool Ratcheting Click-Type Torque Wrench Torque Wrench UPC: 763477008466

by Park Tool

—$71.95

Shop quality, adjustable torque drivers that limits torque applied to fasteners, preventing over-tightening and damage to components. Adjusts to apply 4, 4.5, 5, 5.5, or 6 Newton Meter (Nm) of torque when rotating clockwise All metal internal construction for long life Comfortable ergonomic composite molded grip Includes 3mm, 4mm, 5mm and T25 bits (stored in handle) 1/4" drive,Magnetic socket retains bits Item Specifications Bit Size 3mm Hex,4mm Hex,5mm Hex,T25 Bits Included Yes Park Tool Adjustable Torque Driver Torque Wrench UPC: 763477000057

by Park Tool

—$103.95

High quality ratcheting "click-type" torque wrenches that accurately measure and apply the proper amount of torque to a component's threaded fastener(s). 10 60 Newton meter range (88 530 Inch Pounds) Adjustable in 0.25 Nm increments Ratcheting 3/8" drive Reads and registers for both left hand and right hand threading Dial-adjust system allows desired torque setting to be preset Length: 36.2cm (14.25") For lower torque setting, see the TW-5 NOTE: Torque wrenches are measuring instruments and are not intended for use as a general-purpose ratcheting driver Protective case included Torque wrenches are measuring instruments and are not intended for use as a general-purpose ratcheting driver Calibrated for accuracy to +/-4% Item Specifications Bits Included No Park Tool Ratcheting Click-Type Torque Wrench Torque Wrench UPC: 763477008473

by Park Tool

—$15

TOUCH UP PAINT 1 OZ BOTTLE Scatches or dings can happen when getting rad on the trails or trusting your buddy to put your bike on their car rack. This touch up paint is enough to hide those marks and keep your bike looking like new.. 1oz Bottle with Brush Cap Gloss Acrylic Enamel Do not store above 120 degrees F Apply in a ventilated area while using protective gloves and eyewear Yeti Touch Up Injector & Dispenser UPC: 20002029600

by Yeti

—$37.95

Park Tool Up-Set Pick Set. A set of three unique, multi-purpose picks ideal for a wide variety of detail work Aluminum handle with magnet Picks are replaceable, cold formed, heat treated and polished high carbon steel Set includes 1-straight, 1-hook and 1-90 degree pick Park Tool Up-Set Pick Tool Set Other Tool UPC: 763477008541

by Park Tool

—$28.95

GG-1 Grease GunUse any brand of grease in self-contained canister or simply attach to your favorite Park Tool grease tube Park Tool GG-1 Injector & Dispenser UPC: 763477003584

by Park Tool

—$10.99

Designed to smoothly cut carbon composite handlebars, forks, seat masts, seat posts, etc. Tungsten steel blade fits Park Tool SAW-1 and most 12" hacksaws NOTE: Do NOT use this blade on aluminum Item Specifications Length 12ins Park Tool CSB-1 Carbon Cutting Saw Blade Hacksaw Blade UPC: 763477001450

by Park Tool

—$19.95

Designed for bicycle work, HMR Hammers feature a fiberglass shaft, a soft touch grip, and a dual head. Forged steel precision machined striking face Steel striking face: 1-1/4" (25mm) diameter Non Marring 293-8 replaceable composite tip 12" long (305mm) Park Tool Shop Hammers Hammer UPC: 763477003966

by Park Tool

—$59.95

High-quality Socket and bits selected specifically to tackle a wide variety of common bike repair needs. Shop quality 18-piece set of sockets, hex bits and Torx style bits, selected specifically for common bike repair needs 3, 4, 5, 6, 8 and 10mm hex bits Long reach 5 and 6mm hex bits Long reach T25, T30 and T40 Torx style bits 8, 9, 10, 13, 14, 15mm and 1" sockets The 1" socket fits various Park Tool Freewheel, Cassette Lockring, and Bottom Bracket tools All Sockets and Bits are 3/8" drive Park Tool SBS Socket and Bit Set Ratchets & Bits UPC: 763477006486

by Park Tool

—$13.99

Park Tool hex tools are made from high torque industrial steel and through hardened for long life. Item Specifications Type Y Wrench Tip Size T10,T25,T30 Park Tool Y-Wrenches Y-Wrench UPC: 763477008862

by Park Tool

—$11.89

High-quality Socket and bits selected specifically to tackle a wide variety of common bike repair needs.All Sockets and Bits are 3/8" drive Park Tool SBS Socket and Bit Set Ratchets & Bits UPC: 763477017802

by Park Tool

—$14.95

Park Tool hex tools are made from high torque industrial steel and through hardened for long life. Item Specifications Type Y Wrench Tip Size 4.0mm,5.0mm,6.0mm Park Tool Y-Wrenches Y-Wrench UPC: 763477000217

by Park Tool

—$11.49

Park Tool offers a wide variety of high quality Torx Wrenches for the home or shop mechanic. Comfortable P-handle with a star-shaped T25 for the fittings for bolt heads found on many disc brake calipers and rotors Fast installation and removal of long threaded bolts Made from Bondhus Protanium high torque industrial steel for long life Item Specifications Type P Handle Tip Size T25 Park Tool Torx Wrenches Torx Wrench UPC: 763477005090

by Park Tool

—$12.79

This bench top accessory keeps small parts accessible and all in one place.6" (15cm) diameter bowl features an extra strong magnet Park Tool Magnetic Parts Bowl Other Tool UPC: 763477004482

by Park Tool

—$29.95

Park Tool Pliers feature forged, heat-treated, Cro-Moly steel and soft touch dual density grips.Professional quality 6" needle nose plier features 5 different crimping/grasping areas and a cutting blade Park Tool Pliers Plier UPC: 763477004765

by Park Tool

—$29.95

Features a blade tension adjuster and comfortable handle. Aluminum die cast frame construction Includes one blade and accepts any 12" (300mm) hacksaw blade Park Tool SAW-1 Hacksaw UPC: 763477006257

by Park Tool

—$26.95

Park Tool offers a wide variety of high quality Torx Wrenches for the home or shop mechanic. Shop quality L-shaped, high torque industrial steel Torx compatible wrenches Includes: T9, T10, T15, T20, T25, T27, T30 and T40 Park Tool Torx Wrenches Torx Wrench UPC: 763477008848

by Park Tool

—$54.99

Torque Drive Torque Wrench Includes: 2, 2.5, 3, 4, 5, 6mm hex Torx: T10, T25, T30 Screwdriver: flat head and Phillips Weght: 190g Item Specifications Bit Size 2, 2.5, 3, 4, 5, 6mm hex / T10, T25, T30 Torx / Flat head, Phillips Bits Included Yes Lezyne Torque Drive Torque Wrench EAN: 4712805997633

by Lezyne

—$13.95

Park Tool hex tools are made from high torque industrial steel and through hardened for long life. Item Specifications Type Y Wrench,Ball End Tip Size 3.0mm,2.0mm,2.5mm Park Tool Y-Wrenches Y-Wrench UPC: 763477000224

by Park Tool

—$29.95

Designed for bicycle work, HMR-4 features a fiberglass shaft, a soft touch grip, and a dual head. Dual Head: steel on one side and a replaceable plastic head (part #293) on the other side Steel striking face: 1-3/8" (35mm) diameter Plastic face: 1-11/16" (43mm) diameter 13.5" long (345mm) Park Tool Shop Hammers Hammer UPC: 763477004390

by Park Tool

—$134.95

Designed and built specifically for a wide variety of bicycle Torx compatible work, the THT-1 is a set of eight common sizes of professional quality T-Handle star-shaped wrenches built for speed, efficiency, leverage and a perfect fit. Soon to become your favorite Torx compatible set, the THT-1 includes a handy tool holder that mounts to any vertical surface, including pegboard and solid surfaces (fasteners not included). Carefully selected combination of Chrome Vanadium and S-2 tool steels T6, T8, T10, T15, T20, T25, T30 and T40 Torx compatible wrenches included Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless Sliding T-handle creates increased leverage and multiple access positions Tool holder is included with the set and mounts to any wall, bench or tool box, perfectly positioning each wrench for easy access and storage Park Tool THT-1 Torx Wrench Set Torx Wrench UPC: 763477007889

by Park Tool

—$129.95

No more need to hold wheels between your knees, balance on a bench top or ask for help. The WH-1 Wheel Holder firmly holds thru axle and quick release wheels at three convenient positions. It's like having a strong helper to hold wheels during cleaning, tire and tube work, hub work, cassette work, and tubeless installation. The WH-1 can be bolted or clamped directly to a bench or installed in a bench vise. Quick and easy access to hold virtually any wheel to perfectly position your work for a variety of tasks Wheel holder can be used for wheel building, cassette removal and installation, tire and tube removal and installation, tubeless tire work, general cleaning, hub work, and more Holds wheel at vertical, 35 degrees from vertical, and horizontal positions Accepts 12, 15, and 20mm thru axles and 5mm skewers E-Nickel finish for durability Park Tool WH-1 Wheel Holder Other Tool UPC: 763477008688

by Park Tool

—$87.95

A versatile digital scale built to accurately weigh bikes, frames, and components. Designed to be clamped solidly into a repair stand or hung from a hook Includes a dual position, silicone coated hanging hook Max Weight Limit: 25 kilograms (55 pounds) Requires 3 AAA batteries that are not included Measures and displays kilograms to .02 kg (.02 kg = 20 grams) Measures and displays pounds to 1 oz (1 oz = 28.35 grams) Park Tool Digital Scale Measuring Tool UPC: 763477002839

by Park Tool

—$29.95

Wolf Tooth bottom bracket sockets are tools for installation and removal of external cup bottom brackets. They are machined here in Minnesota with 7075-T6 aluminum. 12 notch BB socket for 46mm diameter notch pattern, BB386, Race Face 30mm Spindle, TF47, SRAM DUB, RaceFace Cinch, Zipp Vuma, Rotor BSA30, Hawk Racing BB3086, Cane Creek Hellbender, and more Large finger notches so you can start threading the cups by hand 3/8" square socket or 1" hex for ratchet/torque wrench Most sockets have either a Shimano bearing preload tool or a 16mm hex for use with Race Face Cinch cranksets Steel inserts for magnetic coupling compatibility with the Pack Wrench Wolf Tooth Bottom Bracket Tools Other Tool UPC: 812719028820

by Wolf Tooth

—$167.95

High-quality Socket and bits selected specifically to tackle a wide variety of common bike repair needs. Comprehensive 37-piece shop-quality set of sockets, hex bits, and Torx compatible drivers selected specifically to tackle a wide variety of common bike repair needs Drive bits and sockets are forged from tough, chrome vanadium steel and nickel chrome plated for lasting durability 3, 4, 5, 6, 8, 10, 14, and 16mm hex bits Long reach 5, 6, 8, 10, 11, 12, and 15mm hex bits Long reach T20, T25, T30, T40 and T45 Torx style bits 8, 9, 10, 11, 12, 13, 14, 15, 17, 19mm and 1" sockets 24, 26, 27, 28, 30, 32mm flat sockets for suspension fork fittings (27mm socket has external taper for narrow access fittings) Includes flat-faced sockets in common sizes for work on suspension forks The 1" socket fits various Park Tool Freewheel, Cassette Lockring, and Bottom Bracket tools All Sockets and Bits are 3/8" drive Park Tool SBS Socket and Bit Set Ratchets & Bits UPC: 763477006493

by Park Tool

—$13.95

Park Tool SZR-1 Shop Scissors Shop quality scissors with sturdy, stainless steel blades and a dual density grip Perfect for a wide range of mechanic's duties including cutting zip-ties, boxes, bar tape and handle grips 5 1/2" long Item Specifications keyword search zombie Park Tool SZR-1 Shop Scissors Other Tool UPC: 763477007698

by Park Tool

—$25.99

Great for delivering measured amounts of grease when lubricating pedals, hubs, bottom brackets, headsets, crank bolts, etc. Fits most standard 9/16" threaded grease tubes. Compatible with Finish Line's 3.5oz Premium Grease tubes, 2oz Ceramic Grease tubes. Fits most other standard 9/16" threaded tubes of grease. Will not fit 1/2" threaded tubes, such as Phil Wood's 3oz Tube Easy one hand operation Ideal for delivering measured amounts of grease into hard to reach places Long tip for recessed suspension pivots Helps prevent grease contamination Finish Line Grease Gun Injector & Dispenser UPC: 036121170018

by Finish Line

—$24.95

Shop quality screwdrivers designed for comfort and durability. Four shop grade screwdrivers (SD-0, SD-2, SD-3, SD-6) in one handy set The ergonomic, dual-density handle offers excellent comfort and grip Features heat-treated, chrome vanadium tips and shafts for durability Item Specifications Tip Size #1,#2,6.0mm,3.0mm Park Tool Screwdrivers Screwdriver UPC: 763477006479

by Park Tool

—$23.95

Park Snap Ring Pliers Park Tool Snap Ring Pliers Snap Ring Plier UPC: 763477006035

by Park Tool

—$17.98

Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. Carefully selected combination of Chrome Vanadium and S-2 tool steels Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless Sliding T-handle creates increased leverage and multiple access positions Park Tool THT Sliding T-Handle Torx Compatible Wrench Torx Wrench UPC: 763477009531

by Park Tool

—$16.95

Park Tool hex tools are made from high torque industrial steel and through hardened for long life. Item Specifications Type Y Wrench,Ball End Tip Size 4.0mm,5.0mm,6.0mm Park Tool Y-Wrenches Y-Wrench UPC: 763477000279

by Park Tool

—$24.95

Forged and machined, the ZP-5 is ideal for closely cutting zip ties and many other materials in tight spaces. Perfect for cutting zip ties Not for cables or metal Park Tool SP-5 Flush Cut Pliers Plier UPC: 763477008701

by Park Tool

—$25.95

Park Snap Ring Pliers Park Tool Snap Ring Pliers Snap Ring Plier UPC: 763477006028

by Park Tool

—$31.95

A great way to keep the benchtop organized during a repair, the OM-2 features an oversized textured work area and raised trays for organizing small parts and hardware. Perfect for overhauling or rebuilding components such as forks, shocks, hubs, suspension linkages, derailleurs, etc. Measures 15" x 24.5" (38cm x 62cm) Interlocking edges allow multiple mats to be joined together Tear/abrasion/shock resistant TPR construction Park Tool Benchtop Overhaul Mat Other Tool UPC: 763477006912

by Park Tool

—$27.95

The SWR-8 is an eight inch (20cm) long ratchet designed to drive any 3/8" drive socket or bit, as well as some Park Tool bottom bracket tools. Forged from alloyed steel and chrome plated for daily use, the SWR-8 is reversible and features a quick release button to easily switch from one socket to another.Chrome plated Park Tool SWR-8 Ratchet Ratchets & Bits UPC: 763477007193

by Park Tool

—$102.95

Park Tool offers a wide variety of high quality Torx Wrenches for the home or shop mechanic. High-torque, industrial steel wrenches Torx compatible drivers at each end Includes T6, T8, T10, T15, T20, T25, T30, and T40 Comfortable, ergonomically designed nylon handles fit perfectly in your hand Durable wall/pegboard mount tool holder allows easy access and organization Park Tool Torx Wrenches Torx Wrench UPC: 763477004888

by Park Tool

—$24.95

The 15" SWB-15 is a forged steel breaker bar with a 3/8" square drive head that pivots 180degrees. Features a long, knurled handle, which is extremely useful when extra leverage is needed to remove stubborn fasteners.Knurled handle Park Tool SWB-15 Breaker Bar Other Tool UPC: 763477007186

by Park Tool

—$11.49

Individual metric combination wrench for daily shop use or advanced mechanics. 7mm combination wrench Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip Item Specifications Tip Size 7mm Park Tool Metric Wrench Combination Wrench UPC: 763477024824

by Park Tool

—$39.95

The PAW-12 features adjustable jaws with a laser engraved measurement scale for a perfect fit. Powerful, adjustable wrench is forged from carbon steel and chrome plated for durability Jaws adjust to open to an ample 36mm Comfortable vinyl dipped handle offers a great grip Park Tool PAW-12 Adjustable Wrench UPC: 763477004864

by Park Tool

—$46.95

An economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout it is intuitive and easy to use, and applies torque to any fastener or component with left or right-handed threads. Perfect for low-torque applications such as stem bolts, levers, and carbon fiber components. 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet. 0 to 60 Newton meter (0 to 50 foot-pound) range Length: 17.75" (450 mm) 3/8" drive Reads and registers torque values for both left hand and right hand threading Item Specifications Bits Included No Park Tool Torque Wrench Torque Wrench UPC: 763477008725

by Park Tool

—$15.95

Park Tool hex tools are made from high torque industrial steel and through hardened for long life.4,5mm & T-25 Torx Item Specifications Type Y Wrench Tip Size 4mm, 5mm,T-25 Torx Includes 4mm, 5mm, T25 Torx Park Tool Y-Wrenches Y-Wrench UPC: 763477000255

by Park Tool

—$21.95

PAW-6 Adjustable Wrench Use for front/rear axle nuts, locknuts, cone adjustment, toeing in brakes and even straightening bent teeth on chainrings Features laser engraved measurement scale for approximating small parts Finish is plated, polished and handle is dipped in blue for comfort Park Tool PAW-6 Adjustable Wrench UPC: 763477005212

by Park Tool

—$26.95

Park Tool offers a wide variety of high quality Torx Wrenches for the home or shop mechanic. Combines the Torx-style wrench sizes currently being used on bicycle components in a convenient fold-up set Multi-position composite handle is lightweight, slip-resistant, and stronger than steel handles Made from Bondhus Protanium high torque industrial steel for long life Includes: T7, T9, T10, T15, T20, T25, T27, T30 and T40 sizes Item Specifications Type Folding Tip Size T7,T9,T10,T15,T20,T25,T30,T40 Park Tool Torx Wrenches Torx Wrench UPC: 763477008855

by Park Tool

—$39.95

This highly accurate tabletop scale is perfect for weighing small parts and components in grams or ounces. Measures in grams and ounces Tare feature to allow the exclusion of the weight of a container Max Capacity: 3000 gram (106 oz) Battery included (one of size CR2032) Park Tool Tabletop Digital Scale Measuring Tool UPC: 763477002822

by Park Tool

—$15.95

Park Socket WrenchThe three most common bolt and nut sizes are combined into a 3-Way "Y" body Item Specifications Tip Size 8,9,10 Park Tool 3-Way Socket Y-Wrench UPC: 763477007179

by Park Tool

—$21.38

TRY-1 Parts & Beer TrayTwelve inches in diameter, looks great on the workbench and will carefully hold anything from derailleurs to tallboy cans to pint glasses Park Tool TRY-1 Other Tool UPC: 763477007995

by Park Tool

—$25.95

Park Snap Ring Pliers Park Tool Snap Ring Pliers Snap Ring Plier UPC: 763477006059

by Park Tool

—$42.95

An economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout it is intuitive and easy to use, and applies torque to any fastener or component with left or right-handed threads. Perfect for low-torque applications such as stem bolts, levers, and carbon fiber components. 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet. 0 to 14 Newton meter (0 to 140 inch-pound) range Length: 11.5" (292 mm) 3/8" drive Reads and registers torque values for both left hand and right hand threading Item Specifications Bits Included No Park Tool Torque Wrench Torque Wrench UPC: 763477008718

by Park Tool

—$156.95

MWR Metric Ratchet Wrenches offer world famous Park Tool quality. Strong, comfortable, and beautiful! MWR-SET includes 6mm to 17mm wrenches Wrenches feature open ends and 12-point box ends with 72 tooth, two-way ratcheting mechanisms Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip Park Tool MWR Metric Ratchet Wrench Combination Wrench UPC: 763477003942

by Park Tool