• Kits include wear and replacement seals: air O-ring seals, damper O-ring seals, dust wiper seals and dust seal foam rings; no hard parts included

The GX Eagle Rear Derailleur gets the job done with a thoughtfully designed cage architecture that improves chain management.

• Will not work with front derailleur drive trains
• Mounting system and re-positioned Cage Lock offer greater durability
• Sealed cartridge pulley bearings

• Fits the same XD drivers that are used for SRAM 10-42 11 speed cassettes
• Tooth profiles provide better up and down shifting and improve chain retention
• 11 stamped steel cogs plus aluminum 50 tooth cogr
• Cassette Body Type: SRAM XD 11/12 Speed
• Cassette Cogs: 10-12-14-16-18-21-24-28-32-36-42-50
• Drivetrain Speeds: 12
• Range: 10-50
• Weight: 450 g

• 32mm straight wall steel chassis
• Motion Control damping featuring low speed compression adjustment
• Forged, hollow aluminum crown

• Solo Air lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously
• TurnKey damping - patented blow-off design takes the hit you, absorbing an unexpected hit instantly
• PopLoc compatible

• Includes air can, tokens, seals & decals
• Compatible with Deluxe and Super Deluxe rear shocks

• Chromoly axle that is fully sealed and has a 100% serviceable bearing and bushing system.
• Offers great performance for a wide range of riders
• Smooth and durable sealed bearing and bushing system
• Lightweight nylon composite body

• Shot-peened to increase fatigue resistance
• Cold-drawn and seamless 6061 aluminum

• Adaptor to allow 8mm hex tool to be used on 16mm CINCH bolt and puller cap

• Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight
• Four bolt bar clamp holds bar securely in position
• Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts
• Faceplate eliminates 'stress risers' which can cause your bar to bend or break

• 80-120mm travel
• External rebound
• TurnKey lockout controls
• Fast Black upper tubes
• Motion Control RL damper
• Compatible with OneLoc remote
• Solo Air spring

The SRAM X01 Eagle Rear Derailleur features an updated cage architecture to provide better chain management.

• Type 3 clutch is smoother and more durable
• 14T lower pulley
• Includes a chain gap tool that makes it easy to set up the correct chain length

• Fits the same XD drivers that are used for SRAM 10-42 11 speed cassettes
• Largest cog is aluminum
• Tooth profiles provide better up and down shifting and improve chain retention
• Titanium Nitride surface treatment reduces friction and enhances wear
• The XG-1299 Eagle cassette meets durability requirements for E-MTB applications

• 49.0mm chainline
• SRAM DUB technology creates a lighter, stiffer and stronger crankset
• Optimized 7000 series forged aluminum arms
• Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability
• Chainring is designed specifically for Eagle chains and drivetrains
• DUB compatible bottom bracket sold separately

• Steel Construction
• Compatible with 9, 10, 11 and 12-speed (excluding Shimano 12-speed chains)
• Narrow Wide tooth profiling ensures consistent chain retention
• Lockring installed/removed with ISIS BB tool
• Stiff 4mm plate thickness to transfer loads without flexing

• 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance
• Manufactured from cold drawn, seamless aluminum
• Shot-peened to increase fatigue resistance

• Tooled reach adjust allows offers a comfortable experience for any rider
• Distinct contact point for controlled braking
• Steel-backed organic pad compound offers more bite
• Caliper features 2 phenolic plastic pistons for plenty of braking power
• Aluminum lever blade and steel hardware ensure durability
• 2-piece caliper construction
• Pinch clamp

• 1800 Lumen high output
• Excellent widespread beam pattern
• 4 Light Levels plus 2 Daylight Flash Mode
• Low Battery Indicator

Ball bearings at the rotation interface make for a smooth-feeling shifter that is very durable.

• Zero Loss design provides instant cable take-up

• Highly tunable Solo Air air spring
• Motion Control damping featuring Low Speed Compression adjustment to lockout
• Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look

• Weight: 1750 g
• 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control
• S is for steel, in this case the spokes. A high performance 28h hub and straight-pull spoke system, but in a more conventional, approachable and economical package
• Accommodates tire widths 2.3-2.8
• 250lbs/113kg max rider weight
• 2-Year Warranty coverage against defects on your Industry Nine wheelset or Classic hubset

Occupying its rightful place at the top of the Eagle ecosystem, the XX1 Eagle rear derailleur gives no-compromise racers and dream-bike builders a true top-tier option. The crisp, precise XX1 shifting feel athletes rely on features an updated cage geometry for improved chain management.

• Type 3 clutch is smoother and more durable
• 14T lower pulley
• Includes a chain gap tool that makes it easy to set up the correct chain length

• Bottom bracket, direct mount ring and spider not included
• Direct mount chainline: 48.5mm / 55mm (Flipped Ring)
• 2X Cinch spider chainline: 47mm
• Boost 2X Cinch spider chainline: 50mm
• Crank arms forged from 7050 aluminum with a bracing matrix for added stiffness
• Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards including: direct mount, 1x, 2x with and without bash, and 3x configurations
• CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS cup BB tool for removal and installation
• 30mm spline interface CNC'd from aluminum super alloy

• Four phenolic plastic pistons provide the stopping power and excellent heat management
• Designed specifically for heavy-duty demands
• Stainless steel heat shield breaks the thermal connection between the brakes pads and the caliper body, which reduces fluid temperature
• Bleeding Edge design for easier maintenance
• Pivot bearing offers crisp lever feel and a fatigue-free ride
• Metallic pads come standard for more power and longer wear

• Compatible with both resin or metal pads
• Includes external type rotor lockring

• Direct mount chainline: 51mm / 57.5mm (Flipped Ring)
• 2X Cinch spider chainline: 49.5mm
• Boost 2X Cinch spider chainline: 52.5mm
• Crank arms forged from 6066 aluminum
• Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards including: direct mount, 1x, 2x with and without bash, and 3x configurations
• 24mm EXI spindle compatible with Race Face X-Type bottom brackets or Hollowtech II compatible bottom brackets
• CINCH removable spiders and direct mount rings require a 20-tooth ISIS cup BB tool for removal and installation

• Intended Use: XC, Trail
• RL shocks feature external rebound and 2-Position compression adjustment (Open, Pedal), Solo Air lets you add air to your shock through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously. This gives you a plush, predictable ride you can set up in seconds, with the lightest weight air spring on the market
• Rapid Recovery allows the shock to recovery faster between consecutive bumps, letting the wheel track the ground with greater precision
• Fast Black hard anodized, forged aluminum body with sag gradients
• 9mm 7075 aluminum shaft
• Mount hardware sold separately (2 sets required per shock)

• External adjusters and parts for Fox suspension forks

• Four aluminum pistons provide the stopping power and excellent heat management
• Stainless steel heat shield breaks the thermal connection between the brakes pads and the caliper body, which reduces fluid temperature
• Forged aluminum lever body and blade
• Bleeding Edge design for easier maintenance,Includes steel-backed sintered metal pads

• Direct mount chainline: 51mm / 57.5mm (Flipped Ring)
• 2X Cinch spider chainline: 49.5mm
• Boost 2X Cinch spider chainline: 52.5mm
• Crank arms forged from 6066 aluminum
• Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards including: direct mount, 1x, 2x with and without bash, and 3x configurations
• 24mm EXI spindle compatible with Race Face X-Type bottom brackets or Hollowtech II compatible bottom brackets
• CINCH removable spiders and direct mount rings require a 20-tooth ISIS cup BB tool for removal and installation

• Cold-drawn and butted proprietaryAirAlloy aluminum tubing
• 4 degree upsweep
• Aonodized, shot-peened finish

• Compatible with both resin or metal pads
• Includes external type rotor lockring

• Highly tunable Solo Air air spring
• Motion Control damping featuring Low Speed Compression adjustment to lockout
• Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look

• 32mm straight wall steel chassis
• Motion Control damping featuring low speed compression adjustment
• Forged, hollow aluminum crown

• 32mm straight wall steel chassis
• Motion Control damping featuring low speed compression adjustment
• Forged, hollow aluminum crown

• Customize inboard and outboard shift options
• AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components

• RC2 damper featuring independent high and low speed compression adjust
• Includes complete right side internals

• The AXS powered component enables customization and scales to an individual rider s liking via the SRAM AXS App
• It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard
• The derailleur is designed with a resilient Overload Clutch - in the event of an impact, the motor gearbox disengages, giving the derailleur freedom to move, and instantly returns back to its position for a seamless experience for the rider
• The system is tested to IP69K water and dust proofing standard for creek crossings, mud splattering and the resulting post-ride pressure washings
• Designed to work with X-Dome Eagle cassettes only
• Battery sold separately

• D3O high performance shock absorbing foam is flexible in it's natural state but will protect upon impact
• Perforated Neoprene enhances venting and moisture control; terry lined for wicking and comfort
• Additional D3O extension saves shins from "pedal bite"; perfect for dirt jumpers and park riders
• Open-back construction; no shoe removal necessary
• Integrated Patella stabilization pad centers the knee and ensures fit and proper armor placement
• Foam padded side walls offer additional coverage
• Branded rubber grab tabs and RF moniker logo

• Highly tunable Solo Air air spring
• Motion Control damping featuring Low Speed Compression adjustment to lockout
• Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look

• Molded traction pins give you all the grip you need without risk of damaging your shoes or shins
• Durable Cro-Mo steel axle features a standard 9/16 pedal thread and serviceable internal parts

• RCT3 damper featuring 3-position compression adjust (open/pedal/firm) with low speed compression adjust
• Includes complete right side internals

• Pairs with both XX1 and X01 Eagle AXS derailleurs
• AXS enabled componentry software makes it possible to both program and personalize compatible SRAM and RockShox components
• Touchpoints are totally customizable to your preferences, allowing you to choose which button does what through the SRAM AXS App
• Customize inboard and outboard shift options
• Compatible with SRAM MatchMaker X
• System is completely water and dust proof to IP69K

• Anodized, shot-peened finish is durable
• Cold-drawn and butted 7050 aluminum tubing offers a balance of strength and weight savings
• Includes onboard cut marks so you can easily shorten it for a custom fit
• 4 degree upsweep, 8 degree back sweep