—$849.99
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. Step-Cast chassis Genuine Kashima Coating on upper tubes FIT4 damper and FLOAT EVOL air spring Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities Item Specifications Axle to Crown Length 530 Brake Type Post Mount 180 Color Shiny Black Crown Race 40 Defined Color Black External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 120 Wheel Size 27.5+ Wheel Size 29" FOX 34 Step-Cast Factory Suspension Fork Suspension Fork UPC: 821973419121
Mpn: 910-21-013by FOX
—$875
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. Step-Cast chassis Genuine Kashima Coating on upper tubes FIT4 damper and FLOAT EVOL air spring Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities Item Specifications Axle to Crown Length 530 Brake Type Post Mount 180 Color Shiny Orange Crown Race 40 Defined Color Orange External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 120 Wheel Size 27.5+ Wheel Size 29" FOX 34 Step-Cast Factory Suspension Fork Suspension Fork UPC: 821973419107
Mpn: 910-21-011by FOX
—$819
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. Step-Cast chassis Genuine Kashima Coating on upper tubes FIT4 damper and FLOAT EVOL air spring Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities Item Specifications Brake Type Post Mount 160 Color Shiny Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 120 Wheel Size 29" FOX 34 Step-Cast Factory Suspension Fork Suspension Fork UPC: 821973419138
Mpn: 910-21-014by FOX
—$875
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. 34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. Genuine Kashima Coating on upper tubes FLOAT EVOL air spring has an enlarged negative air spring to assist with mid-stroke support Lower leg bypass channels help achieve full travel by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping Refined arch design maximizes the stiffness-to-weight ratio to pair perfectly with modern trail bikes Item Specifications Axle to Crown Length 547 Brake Type Post Mount 160 Color Orange Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping Front Axle 15mm Thru x 110mm Lockout Switch None Maximum Tire Width 63 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 140 Wheel Size 29" FOX 34 Factory Suspension Fork Suspension Fork UPC: 821973436746
Mpn: 910-21-108by FOX
—$1,089
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. Step-Cast chassis Genuine Kashima Coating on upper tubes FIT4 damper and FLOAT EVOL air spring Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities Item Specifications Axle to Crown Length 530 Brake Type Post Mount 180 Color Shiny Black Crown Race 40 Defined Color Black External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Handlebar - Cable Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 120 Wheel Size 27.5+ Wheel Size 29" FOX 34 Step-Cast Factory Suspension Fork Suspension Fork UPC: 821973419381
Mpn: 910-21-043by FOX
—$875
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. 34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. FIT4 closed cartridge system provides three on-the-fly compression damping positions Open, Medium, and Firm to adapt to varying trail conditions Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences Genuine Kashima Coating on upper tubes FLOAT EVOL air spring has an enlarged negative air spring to assist with mid-stroke support Lower leg bypass channels help achieve full travel by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping Refined arch design maximizes the stiffness-to-weight ratio to pair perfectly with modern trail bikes Item Specifications Axle to Crown Length 537 Brake Type Post Mount 160 Color Black Crown Race 40 Defined Color Black External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 100mm Lockout Switch Crown Maximum Tire Width 63 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 130 Wheel Size 29" FOX 34 Factory Suspension Fork Suspension Fork UPC: 821973434995
Mpn: 910-21-087by FOX
—$869
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. Kabolt Thru Axle Step-Cast chassis Genuine Kashima Coating on upper tubes FIT4 damper and FLOAT EVOL air spring Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities Item Specifications Axle to Crown Length 512 Brake Type Post Mount 160 Color Orange Crown Race 40 Defined Color Orange External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Handlebar - Cable Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 100 Wheel Size 29" FOX 34 Step-Cast Factory Suspension Fork Suspension Fork UPC: 821973422909
Mpn: 910-21-061by FOX
—$875
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. Kabolt Thru Axle Step-Cast chassis Genuine Kashima Coating on upper tubes FIT4 damper and FLOAT EVOL air spring Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities Item Specifications Axle to Crown Length 512 Brake Type Post Mount 160 Color Orange Crown Race 40 Defined Color Orange External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 100 Wheel Size 29" FOX 34 Step-Cast Factory Suspension Fork Suspension Fork UPC: 821973422855
Mpn: 910-21-053by FOX
—$749
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. The 34 Step-Cast Performance is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. Step-Cast chassis Black anodized upper tubes FIT GRIP damper and FLOAT EVOL air spring Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities Performance Series black-on-black graphics package Item Specifications Axle to Crown Length 530 Brake Type Post Mount 180 Color Matte Black Crown Race 40 Defined Color Black External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 120 Wheel Size 27.5+ Wheel Size 29" FOX 34 Step-Cast Performance Suspension Fork Suspension Fork UPC: 821973419145
Mpn: 910-21-015by FOX
—$875
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. 34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. Genuine Kashima Coating on upper tubes FLOAT EVOL air spring has an enlarged negative air spring to assist with mid-stroke support Lower leg bypass channels help achieve full travel by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping Refined arch design maximizes the stiffness-to-weight ratio to pair perfectly with modern trail bikes Item Specifications Axle to Crown Length 547 Brake Type Post Mount 160 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping Front Axle 15mm Thru x 110mm Lockout Switch None Maximum Tire Width 63 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 140 Wheel Size 29" FOX 34 Factory Suspension Fork Suspension Fork UPC: 821973436753
Mpn: 910-21-109by FOX
—$869
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. 34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. FIT4 closed cartridge system provides three on-the-fly compression damping positions Open, Medium, and Firm to adapt to varying trail conditions Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences Genuine Kashima Coating on upper tubes FLOAT EVOL air spring has an enlarged negative air spring to assist with mid-stroke support Lower leg bypass channels help achieve full travel by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping Refined arch design maximizes the stiffness-to-weight ratio to pair perfectly with modern trail bikes Item Specifications Axle to Crown Length 537 Brake Type Post Mount 160 Color Black Crown Race 40 Defined Color Black External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 100mm Lockout Switch Crown Maximum Tire Width 63 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 130 Wheel Size 29" FOX 34 Factory Suspension Fork Suspension Fork UPC: 821973457178
Mpn: 910-21-090by FOX
—$875
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. Kabolt Thru Axle Step-Cast chassis Genuine Kashima Coating on upper tubes FIT4 damper and FLOAT EVOL air spring Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities Item Specifications Axle to Crown Length 512 Brake Type Post Mount 160 Color Orange Crown Race 40 Defined Color Orange External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 100 Wheel Size 29" FOX 34 Step-Cast Factory Suspension Fork Suspension Fork UPC: 821973422862
Mpn: 910-21-057by FOX
—$1,089
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. Kabolt Thru Axle Step-Cast chassis Genuine Kashima Coating on upper tubes FIT4 damper and FLOAT EVOL air spring Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities Item Specifications Axle to Crown Length 512 Brake Type Post Mount 160 Color Orange Crown Race 40 Defined Color Orange External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Handlebar - Cable Maximum Tire Width 66 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 100 Wheel Size 29" FOX 34 Step-Cast Factory Suspension Fork Suspension Fork UPC: 821973422886
Mpn: 910-21-059by FOX
—$899.99
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. Kabolt Thru Axle Step-Cast chassis Genuine Kashima Coating on upper tubes FIT4 damper and FLOAT EVOL air spring Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities Item Specifications Axle to Crown Length 512 Brake Type Post Mount 160 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 66 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 100 Wheel Size 29" FOX 34 Step-Cast Factory Suspension Fork Suspension Fork UPC: 821973422893
Mpn: 910-21-060by FOX
—$549
Whether you're racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards Integrated fender and light mounts delivery maximum versatility Clearance for tires up to 2.6 wide 160-230 mm rotor compatible Item Specifications Axle to Crown Length 547 Brake Type Post Mount 180 Color Matte Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 58 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 140 Wheel Size 29" FOX 34 AWL Suspension Fork Suspension Fork UPC: 821973419404
Mpn: 910-21-045by FOX
—$549
Whether you're racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards Integrated fender and light mounts delivery maximum versatility Clearance for tires up to 2.6 wide 160-230 mm rotor compatible Item Specifications Axle to Crown Length 501 Brake Type Post Mount 180 Color Matte Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 58 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 100 Wheel Size 29" FOX 34 AWL Suspension Fork Suspension Fork UPC: 821973418568
Mpn: 910-20-210by FOX
—$900
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. Kabolt Thru Axle Step-Cast chassis Genuine Kashima Coating on upper tubes FIT4 damper and FLOAT EVOL air spring Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities Item Specifications Axle to Crown Length 512 Brake Type Post Mount 160 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Handlebar - Cable Maximum Tire Width 66 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 100 Wheel Size 29" FOX 34 Step-Cast Factory Suspension Fork Suspension Fork UPC: 821973422879
Mpn: 910-21-058by FOX
—$779
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. 34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. FIT4 closed cartridge system provides three on-the-fly compression damping positions Open, Medium, and Firm to adapt to varying trail conditions Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences Genuine Kashima Coating on upper tubes FLOAT EVOL air spring has an enlarged negative air spring to assist with mid-stroke support Lower leg bypass channels help achieve full travel by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping Refined arch design maximizes the stiffness-to-weight ratio to pair perfectly with modern trail bikes Item Specifications Axle to Crown Length 537 Brake Type Post Mount 180 Color Shiny Black Crown Race 40 Defined Color Black External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 63 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 130 Wheel Size 29" FOX 34 Factory Suspension Fork Suspension Fork UPC: 821973419060
Mpn: 910-21-007by FOX
—$775
Designed for trail riding, the Factory Performance Elite 34 features a FIT4 damper, FLOAT EVOL air spring, and lightweight chassis. The 34 provides proven trail performance that instills confidence and control. Black anodized upper tubes Performance Series black-on-black graphics package Item Specifications Axle to Crown Length 537 Brake Type Post Mount 160 Color Matte Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 63 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 130 Wheel Size 29" FOX 34 Performance Elite Suspension Fork Suspension Fork UPC: 821973457284
Mpn: 910-21-146by FOX
—$549
Whether you're racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards Integrated fender and light mounts delivery maximum versatility Clearance for tires up to 2.6 wide 160-230 mm rotor compatible Item Specifications Axle to Crown Length 530 Brake Type Post Mount 180 Color Matte Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 58 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 120 Wheel Size 27.5" FOX 34 AWL Suspension Fork Suspension Fork UPC: 821973418575
Mpn: 910-20-211by FOX
—$949
Designed for trail riding, the Factory Performance Elite 34 features a FIT4 damper, FLOAT EVOL air spring, and lightweight chassis. The 34 provides proven trail performance that instills confidence and control. Black anodized upper tubes Performance Series black-on-black graphics package Item Specifications Axle to Crown Length 547 Brake Type Post Mount 160 Color Matte Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch None Maximum Tire Width 63 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 140 Wheel Size 29" FOX 34 Performance Elite Suspension Fork Suspension Fork UPC: 821973468860
Mpn: 910-21-203by FOX
—$919
Designed for trail riding, the Factory Performance Elite 34 features a FIT4 damper, FLOAT EVOL air spring, and lightweight chassis. The 34 provides proven trail performance that instills confidence and control. Black anodized upper tubes Performance Series black-on-black graphics package Item Specifications Axle to Crown Length 527 Brake Type Post Mount 160 Color Matte Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 63 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 120 Wheel Size 29" FOX 34 Performance Elite Suspension Fork Suspension Fork UPC: 821973469034
Mpn: 910-21-202by FOX
© 2024 Worldwide Cyclery