—$21.99

Tubeless Valves feature a removable valve core for ease of sealant install, inflation or accommodation of valve extension courtesy of standard-type extenders. They have both an o-ring and a threaded washer to keep the rim scratch-free, and to keep the washer tight. A clog-resistance function is achieved by 1) oversizing the valve bore near the internal rim rubber seal, and 2) the machined extension of the valve past the seal Made from Aluminum with anodize finish 40mm length Item Specifications Defined Color Black Length (mm) 40 Material Aluminum Valve Core Removable Valve Presta Short 32-40mm Industry Nine Tubeless Valves Tubeless Valves UPC: 810098985116

by Industry Nine

—$180

Industry Nine Torch SRAM XD Freehub Body The Torch series freehubs will be utilized on all 2013 and newer Torch series wheelsets as well as the 2013 Torch "Classic" series hubs Torch freehubs maintain Industry Nine's exceptional 3 degree engagement 3 degree engagement is achieved through the use of an innovative six pawl freehub, which utilizes phased engagement to double the number of engagement points from 60 to 120 Significantly lower weight - approximately 100 gram savings over the XC, Enduro, and Classic series rear hubs Lower drag - new drive ring and pawl geometry, relocated bearings, and a new seal system dramatically reduce freehub drag while coasting The freehub can be quickly and easily removed for cleaning and service and features captured pawls and coil springs that allow tool-free pawl service Kits include freehub, bearings, inner spacer, pawls, and springs Item Specifications Works with SRAM XD Cassettes Industry Nine Freehub Freehub Body UPC: 810098984843

by Industry Nine

—$21.99

Tubeless Valves feature a removable valve core for ease of sealant install, inflation or accommodation of valve extension courtesy of standard-type extenders. They have both an o-ring and a threaded washer to keep the rim scratch-free, and to keep the washer tight. A clog-resistance function is achieved by 1) oversizing the valve bore near the internal rim rubber seal, and 2) the machined extension of the valve past the seal Made from Aluminum with anodize finish 40mm length Item Specifications Defined Color Orange Length (mm) 40 Material Aluminum Valve Core Removable Valve Presta Short 32-40mm Industry Nine Tubeless Valves Tubeless Valves UPC: 810098985192

by Industry Nine

—$30

End caps for Hydra and Hydra 2 hubs. Hydra 6 bolt mountain front 15mm Torque Cap endcaps for 31mm inset RockShox forks Not compatible with Center Lock hubshells Industry Nine Hydra End Caps Front Axle Conversion Kit UPC: 810098984164

by Industry Nine

—$21.99

Tubeless Valves feature a removable valve core for ease of sealant install, inflation or accommodation of valve extension courtesy of standard-type extenders. They have both an o-ring and a threaded washer to keep the rim scratch-free, and to keep the washer tight. A clog-resistance function is achieved by 1) oversizing the valve bore near the internal rim rubber seal, and 2) the machined extension of the valve past the seal Made from Aluminum with anodize finish 40mm length Item Specifications Defined Color Teal Length (mm) 40 Material Aluminum Valve Core Removable Valve Presta Short 32-40mm Industry Nine Tubeless Valves Tubeless Valves UPC: 810098985246

by Industry Nine

—$765

Confident and capable of cleaning the A-line yet budget friendly to save up for a season of bucket list rides, the 1/1 hub stays true to the performance heritage of Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering, 1/1 takes a no-nonsense approach in welcoming riders to Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering S is for steel, in this case the spokes. A high performance 28h hub and conventional J-bend spokes 2-Year Warranty coverage against defects on your Industry Nine wheelset or Classic hubset Item Specifications Cassette Body Type SRAM XD 11/12 Speed Defined Color List Black Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / road / 29" Rear Axle 12mm Thru x 148mm Rim Width (Internal) 30.5 Tire Type Tubeless Ready Wheel Size 29" Industry Nine 1/1 Enduro S Wheelset Wheelset UPC: 810098986021

by Industry Nine

—$30

Industry Nine Torch end caps allow the conversion to a variety of front axle standards. Converts a 15 x 110 hub to the Rockshox Torque Cap standard does not convert 15mm x 100mm thru axle to 15mm Boost. Includes a pair of end caps Industry Nine Torch Classic Mountain End Cap Conversion Kit Front Axle Conversion Kit UPC: 810098984645

by Industry Nine

—$155

The A35 stem is crafted from aluminum billet into a svelte design of equal form and function. Using practices honed in their machine shop over a decade of CNC manufacturing, they offer the rider another unyielding Industry Nine component.   Taking name and shape from the A-axis in their five-axis machining centers, the A35 is an all-mountain stem utilizing a 35mm bar diameter.   The A35 is machined, anodized and assembled entirely in Industry Nine's Asheville, NC facility and available in lengths of 32mm, 40mm, 50mm and 60mm. Add their expressive mix of 11 anodized colors, and you’ve arrived at the intersection of execution and style.   KEY FEATURES Includes six high strength 316 stainless steel custom M5 bolts 180-degree wrap Solid 7075 Machined Aluminum 100% Domestically Sourced One Color MSRP $155 Combo Color MSRP $170 Eleven Anodized Color Choices and Color Combinations (Ask us!)   WEIGHTS A35 - Black Body/Black FP - 32mm - 128g A35 - Black Body/Black FP - 40mm - 135g A35 - Black Body/Black FP - 50mm - 150g A35 - Black Body/Black FP - 60mm - 165g Industry Nine A-Series Stem Stems UPC: 810098985369

by Industry Nine

—$21.99

Tubeless Valves feature a removable valve core for ease of sealant install, inflation or accommodation of valve extension courtesy of standard-type extenders. They have both an o-ring and a threaded washer to keep the rim scratch-free, and to keep the washer tight. A clog-resistance function is achieved by 1) oversizing the valve bore near the internal rim rubber seal, and 2) the machined extension of the valve past the seal Made from Aluminum with anodize finish 40mm length Item Specifications Defined Color Blue Length (mm) 40 Material Aluminum Valve Core Removable Valve Presta Short 32-40mm Industry Nine Tubeless Valves Tubeless Valves UPC: 810098985154

by Industry Nine

—$10.99

Industry Nine Pawl Spring KitsIncludes three coil springs Industry Nine Pawl & Spring Kits Other Hub Part

by Industry Nine

—$21.99

Tubeless Valves feature a removable valve core for ease of sealant install, inflation or accommodation of valve extension courtesy of standard-type extenders. They have both an o-ring and a threaded washer to keep the rim scratch-free, and to keep the washer tight. A clog-resistance function is achieved by 1) oversizing the valve bore near the internal rim rubber seal, and 2) the machined extension of the valve past the seal Made from Aluminum with anodize finish 40mm length Item Specifications Defined Color Red Length (mm) 40 Material Aluminum Valve Core Removable Valve Presta Short 32-40mm Industry Nine Tubeless Valves Tubeless Valves UPC: 810098985222

by Industry Nine

—$155

The A35 stem is crafted from aluminum billet into a svelte design of equal form and function. Using practices honed in their machine shop over a decade of CNC manufacturing, they offer the rider another unyielding Industry Nine component.   Taking name and shape from the A-axis in their five-axis machining centers, the A35 is an all-mountain stem utilizing a 35mm bar diameter.   The A35 is machined, anodized and assembled entirely in Industry Nine's Asheville, NC facility and available in lengths of 32mm, 40mm, 50mm and 60mm. Add their expressive mix of 11 anodized colors, and you’ve arrived at the intersection of execution and style.   KEY FEATURES Includes six high strength 316 stainless steel custom M5 bolts 180-degree wrap Solid 7075 Machined Aluminum 100% Domestically Sourced One Color MSRP $155 Combo Color MSRP $170 Eleven Anodized Color Choices and Color Combinations (Ask us!)   WEIGHTS A35 - Black Body/Black FP - 32mm - 128g A35 - Black Body/Black FP - 40mm - 135g A35 - Black Body/Black FP - 50mm - 150g A35 - Black Body/Black FP - 60mm - 165g Industry Nine A-Series Stem Stems UPC: 810098985383

by Industry Nine

—$21.99

Tubeless Valves feature a removable valve core for ease of sealant install, inflation or accommodation of valve extension courtesy of standard-type extenders. They have both an o-ring and a threaded washer to keep the rim scratch-free, and to keep the washer tight. A clog-resistance function is achieved by 1) oversizing the valve bore near the internal rim rubber seal, and 2) the machined extension of the valve past the seal Made from Aluminum with anodize finish 40mm length Item Specifications Defined Color Purple Length (mm) 40 Material Aluminum Valve Core Removable Valve Presta Short 32-40mm Industry Nine Tubeless Valves Tubeless Valves UPC: 810098985215

by Industry Nine

—$21.99

Tubeless Valves feature a removable valve core for ease of sealant install, inflation or accommodation of valve extension courtesy of standard-type extenders. They have both an o-ring and a threaded washer to keep the rim scratch-free, and to keep the washer tight. A clog-resistance function is achieved by 1) oversizing the valve bore near the internal rim rubber seal, and 2) the machined extension of the valve past the seal Made from Aluminum with anodize finish 40mm length Item Specifications Defined Color Gold Length (mm) 40 Material Aluminum Valve Core Removable Valve Presta Short 32-40mm Industry Nine Tubeless Valves Tubeless Valves UPC: 810098985161

by Industry Nine

—$205

Industry Nine Freehub bodies are machined in North Carolina and contain all necessary pawls, springs and bearings for servicing or converting their hubs. Convert or replace your existing Hydra mountain freehub body with this complete XD kit. Includes everything you need to swap the freehub and get riding Kits include freehub, bearings, inner spacer, pawls, and springs Item Specifications Cassette Body Type SRAM XD Industry Nine Freehub Freehub Body UPC: 810098984362

by Industry Nine

—$28

Industry Nine Spoke Kit.Fits 32hole wheels Item Specifications Defined Color Black Industry Nine Spoke Kit Spoke Kit

by Industry Nine

—$950

The most capable wheels in I9 history have worn the Enduro name and the Enduro S does the pedigree proud. Enduro S is handbuilt for the long haul with 28 straight-pull spokes, a proven rim profile and Hydra-equipped hubs. Born from an impressive bloodline, Enduro S is well situated to elevate your riding with features you won't have to sell your first born for. Weight: 1750 g 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control S is for steel, in this case the spokes. A high performance 28h hub and straight-pull spoke system, but in a more conventional, approachable and economical package Accommodates tire widths 2.3-2.8" 250lbs/113kg max rider weight 2-Year Warranty coverage against defects on your Industry Nine wheelset or Classic hubset Item Specifications Cassette Body Type SRAM XD 11/12 Speed Color Black Defined Color Black Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 584 / 650b / 27.5" Rear Axle 12mm Thru x 148mm Rim Material Alloy Rim Width (Internal) 30.5 Tire Type Tubeless Ready Valve Presta Wheel Size 27.5" Industry Nine Enduro S Wheelset Wheelset UPC: 810098986113

by Industry Nine

—$155

When checking out, please let us know in the notes section located on the cart screen what colors and size you would like! See color and size options below. Available to mix and match any colors & sizes below, one color for the body and one color for the faceplate. Available in Anodized: Red Green Lime Gold Blue Turquoise Red Purple Green Silver Pink Orange Sizes: 32mm +/- 5 degrees 40mm +/- 6 degrees 50mm +/- 6 degrees The A35 stem is crafted from aluminum billet into a svelte design of equal form and function. Using practices honed in their machine shop over a decade of CNC manufacturing, they offer the rider another unyielding Industry Nine component. Taking name and shape from the A-axis in their five-axis machining centers, the A35 is an all-mountain stem utilizing a 35mm bar diameter. The A35 is machined, anodized and assembled entirely in Industry Nine's Asheville, NC facility and available in lengths of 32mm, 40mm and 50mm. Add their expressive mix of 11 anodized colors, and you’ve arrived at the intersection of execution and style. KEY FEATURES: Includes six high strength 316 stainless steel custom M5 bolts 180-degree wrap Solid 7075 Machined Aluminum 100% Domestically Sourced Eleven Anodized Color Choices and Color Combinations (Ask us!) WEIGHTS: A35 - Black Body/Black FP - 32mm - 128g A35 - Black Body/Black FP - 40mm - 135g A35 - Black Body/Black FP - 50mm - 150g Industry Nine A35 Stem Stems

by Industry Nine

—$19.43

Industry Nine cartridge bearings are OE replacement bearings.Compatible with Torch Hub and Wheelsets, not compatible with Pre-Torch wheels and hubs (2006-2011) Item Specifications Bearing I.D. (mm) 17 Bearing O.D. (mm) 26 Manufacturer Number 3803 Material Steel Thickness 10 Industry Nine Hub Bearing Cartridge Bearing

by Industry Nine

—$180

Industry Nine Freehub bodies are machined in North Carolina and contain all necessary pawls, springs and bearings for servicing or converting their hubs. Not compatible with Torch Road or Torch Classic Road hubs Kits include freehub, bearings, inner spacer, pawls, and springs Item Specifications Cassette Body Type Shimano HG Material Aluminum Industry Nine Freehub Freehub Body UPC: 810098984836

by Industry Nine

—$205

Industry Nine Freehub bodies are machined in North Carolina and contain all necessary pawls, springs and bearings for servicing or converting their hubs. Micro Spline kit also includes MS Drive-Side Endcap and freehub body seal Convert or replace your existing Hydra mountain freehub body with this complete MicroSpline kit. Includes everything you need to swap the freehub and get riding Kits include freehub, bearings, inner spacer, pawls, and springs Item Specifications Cassette Body Type Shimano Micro Spline Industry Nine Freehub Freehub Body UPC: 810098984409

by Industry Nine

—$14.09

Industry Nine Freehub Bearing Item Specifications Fits 2013+ Inner Industry Nine Hub Bearing Cartridge Bearing

by Industry Nine

—$28

Industry Nine Spoke Kit. Item Specifications Defined Color Black Industry Nine Spoke Kit Spoke Kit

by Industry Nine

—$21.99

Tubeless Valves feature a removable valve core for ease of sealant install, inflation or accommodation of valve extension courtesy of standard-type extenders. They have both an o-ring and a threaded washer to keep the rim scratch-free, and to keep the washer tight. A clog-resistance function is achieved by 1) oversizing the valve bore near the internal rim rubber seal, and 2) the machined extension of the valve past the seal Made from Aluminum with anodize finish 40mm length Item Specifications Defined Color Green Length (mm) 40 Material Aluminum Valve Core Removable Valve Presta Short 32-40mm Industry Nine Tubeless Valves Tubeless Valves UPC: 810098985185

by Industry Nine

—$13.85

Industry Nine cartridge bearings are OE replacement bearings. Item Specifications Bearing I.D. (mm) 17 Bearing O.D. (mm) 30 Manufacturer Number 61903 Thickness 7 Industry Nine Hub Bearing Cartridge Bearing

by Industry Nine

—$775

Confident and capable of cleaning the A-line yet budget friendly to save up for a season of bucket list rides, the 1/1 hub stays true to the performance heritage of Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering, 1/1 takes a no-nonsense approach in welcoming riders to Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering S is for steel, in this case the spokes. A high performance 28h hub and conventional J-bend spokes 2-Year Warranty coverage against defects on your Industry Nine wheelset or Classic hubset Item Specifications Cassette Body Type Shimano Micro Spline Defined Color List Black Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / road / 29" Rear Axle 12mm Thru x 148mm Rim Width (Internal) 30.5 Tire Type Tubeless Ready Wheel Size 29" Industry Nine 1/1 Enduro S Wheelset Wheelset UPC: 810098986069

by Industry Nine

—$765

Confident and capable of cleaning the A-line yet budget friendly to save up for a season of bucket list rides, the 1/1 hub stays true to the performance heritage of Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering, 1/1 takes a no-nonsense approach in welcoming riders to Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering S is for steel, in this case the spokes. A high performance 28h hub and conventional J-bend spokes 2-Year Warranty coverage against defects on your Industry Nine wheelset or Classic hubset Item Specifications Cassette Body Type SRAM XD 11/12 Speed Defined Color List Black Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 584 / 650b / 27.5" Rear Axle 12mm Thru x 148mm Rim Width (Internal) 30.5 Tire Type Tubeless Ready Wheel Size 27.5" Industry Nine 1/1 Enduro S Wheelset Wheelset UPC: 810098986083

by Industry Nine

—$30

Industry Nine End Cap Kits for Torch Series Wheels The front hub is compatible with QR, 9mm thru bolt, 15mm, and 20mm (x110mm) by swapping endcaps The front hub utilizes o-ring seals to protect bearings Kit includes 2 axle conversion end caps Does not include skewers Item Specifications Fits Torch Industry Nine Torch Classic Mountain End Cap Conversion Kit Front Axle Conversion Kit UPC: 810098984621

by Industry Nine

—$460

Made in Asheville, NC, Torch Hydra hubs feature low weight and 690 points of engagement with .52 degrees between engagements making them one of the highest engaging hubs on the market. The hubs are offered in a wide range of colors, as well as HG, XD, and Micro Splined freehub bodies. From the outside, the new Hydra hubs look identical to the previous generation; the real magic happens inside with the upgraded Hydra drive mechanism. Featuring the new Hydra internals, designed around a traditional flanged hub Angled flanges for lower spoke stress Hydra freehub mechanism improves over previous Torch hub internals with multiple heads engaging for strength and quicker engagement 6-pawl, 6-phase, 115-tooth drive ring with .52 deg between engagement points, 690 amazing points of engaging Item Specifications Flange Diameter Left 58mm Flange Diameter Right 60mm Hub Drilling 32 Spoke Interface J-Bend Cassette Body Type SRAM XD Skewer Included No Industry Nine Hydra Classic Rear Hub Rear Hub UPC: 810098980043

by Industry Nine

—$765

Confident and capable of cleaning the A-line yet budget friendly to save up for a season of bucket list rides, the 1/1 hub stays true to the performance heritage of Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering, 1/1 takes a no-nonsense approach in welcoming riders to Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering S is for steel, in this case the spokes. A high performance 28h hub and conventional J-bend spokes 2-Year Warranty coverage against defects on your Industry Nine wheelset or Classic hubset Item Specifications Cassette Body Type Shimano Dynasys 11 Speed Mountain Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / road / 29" Rear Axle 12mm Thru x 148mm Rim Width (Internal) 30.5 Tire Type Tubeless Ready Wheel Size 29" Industry Nine 1/1 Enduro S Wheelset Wheelset UPC: 810098986502

by Industry Nine

—$170

When checking out, please let us know in the notes section located on the cart screen what color and size you would like! See color and size options below. Available only in 1 solid color, if you would like a Mix and Match stem, please visit our product page here. Available in Anodized: Red Green Lime Gold Blue Turquoise Red Purple Green Silver Pink Orange Sizes: 32mm +/- 5 degrees 40mm +/- 6 degrees 50mm +/- 6 degrees The A35 stem is crafted from aluminum billet into a svelte design of equal form and function. Using practices honed in their machine shop over a decade of CNC manufacturing, they offer the rider another unyielding Industry Nine component. Taking name and shape from the A-axis in their five-axis machining centers, the A35 is an all-mountain stem utilizing a 35mm bar diameter. The A35 is machined, anodized and assembled entirely in Industry Nine's Asheville, NC facility and available in lengths of 32mm, 40mm and 50mm. Add their expressive mix of 11 anodized colors, and you’ve arrived at the intersection of execution and style. KEY FEATURES: Includes six high strength 316 stainless steel custom M5 bolts 180-degree wrap Solid 7075 Machined Aluminum 100% Domestically Sourced One Color MSRP $155 Combo Color MSRP $170 Eleven Anodized Color Choices and Color Combinations (Ask us!) WEIGHTS: A35 - Black Body/Black FP - 32mm - 128g A35 - Black Body/Black FP - 40mm - 135g A35 - Black Body/Black FP - 50mm - 150g Industry Nine A35 Stem Stems

by Industry Nine

—$40

Industry Nine Torch end caps allow the conversion to a variety of rear axle standards. Converts to QR Compatible only with Torch hubs and wheelsets Includes two end caps Compatible only with Torch MTB and Fat Bike hubs, not compatible with Road or CX Disc hubs Industry Nine Torch Classic Mountain/Fat End Cap Conversion Kit Rear Axle Conversion Kit

by Industry Nine

—$30

Industry Nine Pawl kits are replacement parts for Torch or Pre-Torch hubs.Includes 3 pawls Industry Nine Pawl & Spring Kits Other Hub Part

by Industry Nine

—$155

Industry Nine's A-Series mountain bike stems are crafted from domestically-sourced 7075 aluminum billet into a svelte design achieving a nexus of form and function. Using advanced manufacturing techniques honed over decades in their CNC machine shop, they continue their tradition of offering riders uncompromising components. The A35 and A318 utilize either a 35mm or 31.8mm handlebar clamp diameter providing 180 degrees of contact on the stem body for twist-free security that will play nice with both alloy and carbon bars Stainless steel hardware ensures everything stays in place and looks great, regardless of mud-blasting washes or rainforest climates Item Specifications Bar Clamp Diameter (mm) 35.0 Color Orange Defined Color Orange Length 40 Material Aluminum Rise +6 Rise -6 S.H.I.S. Stem Clamp Diameter 28.6 Stack Height 40 Stem Angle (deg) 8 Weight 135 Industry Nine A-Series Stem Stems UPC: 810098985390

by Industry Nine

—$21.30

Tubeless Valves feature a removable valve core for ease of sealant install, inflation or accommodation of valve extension courtesy of standard-type extenders. They have both an o-ring and a threaded washer to keep the rim scratch-free, and to keep the washer tight. A clog-resistance function is achieved by 1) oversizing the valve bore near the internal rim rubber seal, and 2) the machined extension of the valve past the seal Made from Aluminum with anodize finish 40mm length Item Specifications Defined Color Silver Length (mm) 40 Material Aluminum Valve Core Removable Valve Presta Short 32-40mm Industry Nine Tubeless Valves Tubeless Valves UPC: 810098985239

by Industry Nine

—$155

Industry Nine's A-Series mountain bike stems are crafted from domestically-sourced 7075 aluminum billet into a svelte design achieving a nexus of form and function. Using advanced manufacturing techniques honed over decades in their CNC machine shop, they continue their tradition of offering riders uncompromising components. The A35 and A318 utilize either a 35mm or 31.8mm handlebar clamp diameter providing 180 degrees of contact on the stem body for twist-free security that will play nice with both alloy and carbon bars Stainless steel hardware ensures everything stays in place and looks great, regardless of mud-blasting washes or rainforest climates Item Specifications Bar Clamp Diameter (mm) 35.0 Color Black Defined Color Black Length 50 Material Aluminum Rise +6 Rise -6 S.H.I.S. Stem Clamp Diameter 28.6 Stack Height 40 Stem Angle (deg) 7 Weight 150 Industry Nine A-Series Stem Stems UPC: 810098985376

by Industry Nine

—$40

Industry Nine End Cap Kits for Torch Series Wheels The 135mm rear hub is compatible with QR, 10x135, 12x135, and 12x142 by swapping endcaps The rear hub features a custom silicone lip seal to protect the drive mechanism and Teflon contact seals for the endcaps to protect the outboard bearings Also compatible with 12x157 set ups Kit includes 2 axle conversion end caps Does not include skewers Item Specifications Fits Torch Industry Nine Torch Classic Mountain/Fat End Cap Conversion Kit Rear Axle Conversion Kit UPC: 810098984690

by Industry Nine

—$155

The A35 stem is crafted from aluminum billet into a svelte design of equal form and function. Using practices honed in their machine shop over a decade of CNC manufacturing, they offer the rider another unyielding Industry Nine component. Taking name and shape from the A-axis in their five-axis machining centers, the A35 is an all-mountain stem utilizing a 35mm bar diameter. The A35 is machined, anodized and assembled entirely in Industry Nine's Asheville, NC facility and available in lengths of 32mm, 40mm, 50mm and 60mm. Add their expressive mix of 11 anodized colors, and you’ve arrived at the intersection of execution and style. KEY FEATURES: Includes six high strength 316 stainless steel custom M5 bolts 180-degree wrap Solid 7075 Machined Aluminum 100% Domestically Sourced Eleven Anodized Color Choices you can find the other color options here. WEIGHTS: A35 32mm - 128g A35 40mm - 135g A35 50mm - 150g Industry Nine A35 Stem Stems

by Industry Nine

—$765

Confident and capable of cleaning the A-line yet budget friendly to save up for a season of bucket list rides, the 1/1 hub stays true to the performance heritage of Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering, 1/1 takes a no-nonsense approach in welcoming riders to Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering S is for steel, in this case the spokes. A high performance 28h hub and conventional J-bend spokes 2-Year Warranty coverage against defects on your Industry Nine wheelset or Classic hubset Item Specifications Cassette Body Type Shimano Dynasys 11 Speed Mountain Defined Color List Black Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 584 / 650b / 27.5" Rear Axle 12mm Thru x 148mm Rim Width (Internal) 30.5 Tire Type Tubeless Ready Wheel Size 27.5" Industry Nine 1/1 Enduro S Wheelset Wheelset UPC: 810098986540

by Industry Nine

—$155

Industry Nine's A-Series mountain bike stems are crafted from domestically-sourced 7075 aluminum billet into a svelte design achieving a nexus of form and function. Using advanced manufacturing techniques honed over decades in their CNC machine shop, they continue their tradition of offering riders uncompromising components. The A35 and A318 utilize either a 35mm or 31.8mm handlebar clamp diameter providing 180 degrees of contact on the stem body for twist-free security that will play nice with both alloy and carbon bars Stainless steel hardware ensures everything stays in place and looks great, regardless of mud-blasting washes or rainforest climates Item Specifications Bar Clamp Diameter (mm) 35.0 Color Turquoise Defined Color Blue Length 40 Material Aluminum Rise +6 Rise -6 S.H.I.S. Stem Clamp Diameter 28.6 Stack Height 40 Stem Angle (deg) 8 Weight 135 Industry Nine A-Series Stem Stems UPC: 810098985406

by Industry Nine

—$21.30

Tubeless Valves feature a removable valve core for ease of sealant install, inflation or accommodation of valve extension courtesy of standard-type extenders. They have both an o-ring and a threaded washer to keep the rim scratch-free, and to keep the washer tight. A clog-resistance function is achieved by 1) oversizing the valve bore near the internal rim rubber seal, and 2) the machined extension of the valve past the seal Made from Aluminum with anodize finish 40mm length Item Specifications Defined Color Green Length (mm) 40 Material Aluminum Valve Core Removable Valve Presta Short 32-40mm Industry Nine Tubeless Valves Tubeless Valves UPC: 810098985178

by Industry Nine

—$155

Industry Nine's A-Series mountain bike stems are crafted from domestically-sourced 7075 aluminum billet into a svelte design achieving a nexus of form and function. Using advanced manufacturing techniques honed over decades in their CNC machine shop, they continue their tradition of offering riders uncompromising components. The A35 and A318 utilize either a 35mm or 31.8mm handlebar clamp diameter providing 180 degrees of contact on the stem body for twist-free security that will play nice with both alloy and carbon bars Stainless steel hardware ensures everything stays in place and looks great, regardless of mud-blasting washes or rainforest climates Item Specifications Bar Clamp Diameter (mm) 35.0 Color Orange Defined Color Orange Length 32 Material Aluminum Rise +5 Rise -5 S.H.I.S. Stem Clamp Diameter 28.6 Stack Height 42 Stem Angle (deg) 9 Weight 128 Industry Nine A-Series Stem Stems UPC: 810098985482

by Industry Nine

—$155

Industry Nine's A-Series mountain bike stems are crafted from domestically-sourced 7075 aluminum billet into a svelte design achieving a nexus of form and function. Using advanced manufacturing techniques honed over decades in their CNC machine shop, they continue their tradition of offering riders uncompromising components. The A35 and A318 utilize either a 35mm or 31.8mm handlebar clamp diameter providing 180 degrees of contact on the stem body for twist-free security that will play nice with both alloy and carbon bars Stainless steel hardware ensures everything stays in place and looks great, regardless of mud-blasting washes or rainforest climates Item Specifications Bar Clamp Diameter (mm) 35.0 Color Turquoise Defined Color Blue Length 32 Material Aluminum Rise +5 Rise -5 S.H.I.S. Stem Clamp Diameter 28.6 Stack Height 42 Stem Angle (deg) 9 Weight 128 Industry Nine A-Series Stem Stems UPC: 810098985543

by Industry Nine

—$40

Industry Nine Torch end caps allow the conversion to a variety of rear axle standards. Compatible only with Torch hubs and wheelsets Includes two end caps Compatible only with Torch MTB and Fat Bike hubs, not compatible with Road or CX Disc hubs Industry Nine Torch Classic Mountain/Fat End Cap Conversion Kit Rear Axle Conversion Kit UPC: 810098984744

by Industry Nine

—$170

Industry Nine Freehub bodies are machined in North Carolina and contain all necessary pawls, springs and bearings for servicing or converting their hubs. Convert or replace your existing Torch freehub body with this complete XD-R 11/12 spd freehub kit with bearings. Includes everything you need to swap the freehub and get riding Kits include freehub, bearings, inner spacer, pawls, and springs Industry Nine Freehub Freehub Body UPC: 810098985062

by Industry Nine

—$30

Industry Nine Torch Road end caps allow the conversion to a variety of road front axle standards. Converts from QR to 12mm thru axle Not compatible with Torch Mountain or Fat Bike hubs End caps are not compatible with Road Centerlock hubs Includes a pair of end caps Industry Nine Torch Classic CX/Road End Cap Conversion Kit Front Axle Conversion Kit UPC: 810098984997

by Industry Nine

—$30

Torch Classic Road End Caps Industry Nine Torch Classic Road Front Axle Conversion Kit UPC: 810098985017

by Industry Nine

—$775

Featuring a dual phased-pawl drive mechanism accomplishing 90 POE and 4degree engagement by way of a six pawl driver and 45 tooth drivering S is for steel, in this case the spokes. A high-performance 28h hub and conventional J-bend spokes 2-Year Warranty coverage against defects on your Industry Nine wheelset or Classic hubset Item Specifications Cassette Body Type Shimano Microspline Defined Color List Black Front Axle 15mm Thru x 110mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 622 / road / 29" Rear Axle 12mm Thru x 148mm Rim Width (Internal) 27 Tire Type Tubeless Ready Wheel Size 29" Industry Nine 1/1 Trail S Wheelset Wheelset

by Industry Nine

—$9.75

Industry Nine Pawl kits are replacement parts for Torch or Pre-Torch hubs. Industry Nine Pawl & Spring Kits Other Hub Part UPC: 810098985109

by Industry Nine

—$21.30

Tubeless Valves feature a removable valve core for ease of sealant install, inflation or accommodation of valve extension courtesy of standard-type extenders. They have both an o-ring and a threaded washer to keep the rim scratch-free, and to keep the washer tight. A clog-resistance function is achieved by 1) oversizing the valve bore near the internal rim rubber seal, and 2) the machined extension of the valve past the seal Made from Aluminum with anodize finish 40mm length Item Specifications Defined Color Pink Length (mm) 40 Material Aluminum Valve Core Removable Valve Presta Short 32-40mm Industry Nine Tubeless Valves Tubeless Valves UPC: 810098985208

by Industry Nine