—$301.28
You want World Champion winning performance in your current fork? No problem, our Öhlins DH race drop in damper and air spring system available for FOX 40 downhill forks. Öhlins TTX 18 cartridge kit featuring downhill-optimized 18 mm piston for improved small bump sensitivity. Increased damping pressure bandwidth to achieve improvements in damping valve response and sensitivity. The adjustment range specifically for gravity use both race and park. 15 clicks of low-speed compression and low-speed rebound and 5 clicks of high-speed compression. Twin piston three-chamber air spring system, isolated from the upper tubes to reduced head build up and featuring Total Tune Spring Curve System (TTSC) allowing total air spring tuning from the initial movement through to the bottom out. Features: TTX-technology Independent damper system Ohlins TTX Air Springs & Parts
Mpn: FGBX 1720by Ohlins
—$1,245
The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork
Mpn: FGMTB 3617 2011by Ohlins
—$1,190
RXF34 m.2 is our new platform aimed for short travel trail bikes also known as downcountry bikes. The fork balances light weight with a stiff chassis giving a predictable steering. It has our new OTX18 damper that is an evolution of the more gravity oriented and highly successful TTX18 damper. OTX18 is 27% lighter and optimized for faster and more fluid trail riding, it strikes the best balance between traction, control and weight. The air spring has a positive and self balancing negative chamber and it can be tuned with a new spacer system. The RXF34 m.2 is all you can expect from a race fork but in a short travel trail fork format. Features: OTX18 Trail Optimized Damper 34 mm stanchions 15 clicks of low-speed compression adjustment 15 clicks of rebound adjustment 3 clicks of high-speed compression adjustment, climb mode in 4th position Maximum tire size: 29x2.6” Weight: 1698g without volume spacers Axle to crown: 541mm @ 130mm stroke Ohlins RXF34 m.2 Suspension Fork
Mpn: FGMTB 3413 2230by Ohlins
—$1,350
Please, specificy in the Notes/Special Instructions section of the Cart Page what travel range you would like the fork at, choices are from 130mm to 170mm as well as your riding weight. The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses. Do you want to know what suspension that fits your bike? Use Öhlins Performance Suspension Guide, it will also recommend a personal set up. Features: TTX 18 cartridge kit Coil: Travel 130mm - 170mm Independent spring system Independent damper system 36mm upper tube diameter Overall improvements for reducing friction Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Coil Suspension Fork
Mpn: FGMTB 3617 2071by Ohlins
—$1,245
Please, specificy in the Notes/Special Instructions section of the Cart Page what travel range you would like the fork at, choices are from 130mm to 170mm as well as your riding weight. The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses. Do you want to know what suspension that fits your bike? Use Öhlins Performance Suspension Guide, it will also recommend a personal set up. Features: TTX 18 cartridge kit Coil: Travel 130mm - 170mm Independent spring system Independent damper system 36mm upper tube diameter Overall improvements for reducing friction Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Coil Suspension Fork
Mpn: FGMTB 3617 2021by Ohlins
—$1,395
The RXF38 m.2 delivers hard-hitting dual-crown downhill performance to the single-crown scene. The brand new RXF38 m.2 is available for 29” bikes, with five different iterations offering a range of 160-180mm travel, and 44 and 51mm crown offset options built around Öhlins signature TTX18 damper and unique three-chamber air spring. Developed for hard-hitting trail, enduro and e-MTB use, the RXF38 m.2 shares several key technologies with its dual-crown brother, the DH38. The newcomer to the Öhlins lineup brings 38mm stanchions to the brand’s single crown range, a chassis optimized for big-hit trail riding, confidence-inspiring TTX damping and unrivalled adjustability. It’s the product of Öhlins long-term close collaboration with the UCI DH World Championship-winning team Specialized Gravity, where milliseconds gained make for wins. The fork’s re-tuned twin-piston and three-chamber air spring system allow for comprehensive, simple and tool-free air spring tuning from the initial movement right through to the bottom out. And much like the World Cup-winning DH38 m.1, the RXF38 m.2 benefits from a huge range of intuitive adjustments. Riders can easily fine-tune the fork’s performance to suit any terrain, thanks to 15 clicks of low-speed compression and low-speed rebound damping and 3 clicks of high-speed compression adjustment, in addition to a climb mode setting. Setup is simple then, but for those who want to go even further, and adjust their fork like the pros, a race-proven setting bank is also available at Öhlins service centers for even more fine-tuning. The fork’s overhauled chassis and uncompromisingly stiff 38mm stanchions are complemented by Öhlins signature TTX18 damping system. Adopted from its DH38 m.1 big brother and adapted to fit a single-crown platform, the TTX18 damping system offers world-class, race-proven performance. Its increased damping pressure bandwidth enables improved damping valve response, with a trail-optimized 18mm piston providing superb small bump sensitivity to keep tires planted over technical terrain. When it comes to bumps of the bigger variety, the fork’s highly capable air spring and TTX18 damper combine to swallow roots and rocks whole, maintaining speed and grip on the toughest lines. Between the big hits, the RXF38 m.2 makes light work of servicing too. Courtesy of Öhlins simple service kit – compatible across the RXF and DH range – the RXF38 m.2 can be maintained factory fresh year after year, so you can focus on the riding. Features: TTX18 damping system Independent cartridge air spring and damper systems Air spring adjustable to 160/170/180 mm of travel 38 mm stanchion diameter with both 44mm and 51mm crown offsets Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 Floating axle design to minimize friction Approved for eMTB use and available with eMTB compatible crowns Compatible with maximum tire sizes up to 29”x2.6 Compatible with maximum rotor sizes up to 220mm, optimised for 200mm. Axle to crown measurement: 583mm @ 170mm stroke Weight: from 2320 grams Ohlins RXF38 m.2 Suspension Fork
Mpn: FGMTB 3817 2210by Ohlins
—$1,395
The RXF38 m.2 delivers hard-hitting dual-crown downhill performance to the single-crown scene. The brand new RXF38 m.2 is available for 29” bikes, with five different iterations offering a range of 160-180mm travel, and 44 and 51mm crown offset options built around Öhlins signature TTX18 damper and unique three-chamber air spring. Developed for hard-hitting trail, enduro and e-MTB use, the RXF38 m.2 shares several key technologies with its dual-crown brother, the DH38. The newcomer to the Öhlins lineup brings 38mm stanchions to the brand’s single crown range, a chassis optimized for big-hit trail riding, confidence-inspiring TTX damping and unrivalled adjustability. It’s the product of Öhlins long-term close collaboration with the UCI DH World Championship-winning team Specialized Gravity, where milliseconds gained make for wins. The fork’s re-tuned twin-piston and three-chamber air spring system allow for comprehensive, simple and tool-free air spring tuning from the initial movement right through to the bottom out. And much like the World Cup-winning DH38 m.1, the RXF38 m.2 benefits from a huge range of intuitive adjustments. Riders can easily fine-tune the fork’s performance to suit any terrain, thanks to 15 clicks of low-speed compression and low-speed rebound damping and 3 clicks of high-speed compression adjustment, in addition to a climb mode setting. Setup is simple then, but for those who want to go even further, and adjust their fork like the pros, a race-proven setting bank is also available at Öhlins service centers for even more fine-tuning. The fork’s overhauled chassis and uncompromisingly stiff 38mm stanchions are complemented by Öhlins signature TTX18 damping system. Adopted from its DH38 m.1 big brother and adapted to fit a single-crown platform, the TTX18 damping system offers world-class, race-proven performance. Its increased damping pressure bandwidth enables improved damping valve response, with a trail-optimized 18mm piston providing superb small bump sensitivity to keep tires planted over technical terrain. When it comes to bumps of the bigger variety, the fork’s highly capable air spring and TTX18 damper combine to swallow roots and rocks whole, maintaining speed and grip on the toughest lines. Between the big hits, the RXF38 m.2 makes light work of servicing too. Courtesy of Öhlins simple service kit – compatible across the RXF and DH range – the RXF38 m.2 can be maintained factory fresh year after year, so you can focus on the riding. Features: TTX18 damping system Independent cartridge air spring and damper systems Air spring adjustable to 160/170/180 mm of travel 38 mm stanchion diameter with both 44mm and 51mm crown offsets Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 Floating axle design to minimize friction Approved for eMTB use and available with eMTB compatible crowns Compatible with maximum tire sizes up to 29”x2.6 Compatible with maximum rotor sizes up to 220mm, optimised for 200mm. Axle to crown measurement: 583mm @ 170mm stroke Weight: from 2320 grams Ohlins RXF38 m.2 Suspension Fork
Mpn: FGMTB 3817 2210by Ohlins
—$899.99
The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork
Mpn: FGMTB 3615 2060by Ohlins
—$1,245
The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork
Mpn: FGMTB 3616 2011by Ohlins
—$1,245
The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork
Mpn: FGMTB 3617 2010by Ohlins
—$1,190
RXF34 m.2 is our new platform aimed for short travel trail bikes also known as downcountry bikes. The fork balances light weight with a stiff chassis giving a predictable steering. It has our new OTX18 damper that is an evolution of the more gravity oriented and highly successful TTX18 damper. OTX18 is 27% lighter and optimized for faster and more fluid trail riding, it strikes the best balance between traction, control and weight. The air spring has a positive and self balancing negative chamber and it can be tuned with a new spacer system. The RXF34 m.2 is all you can expect from a race fork but in a short travel trail fork format. Features: OTX18 Trail Optimized Damper 34 mm stanchions 15 clicks of low-speed compression adjustment 15 clicks of rebound adjustment 3 clicks of high-speed compression adjustment, climb mode in 4th position Maximum tire size: 29x2.6” Weight: 1698g without volume spacers Ohlins RXF34 m.2 Suspension Fork
Mpn: FGMTB 3412 2230by Ohlins
—$1,350
Please, specificy in the Notes/Special Instructions section of the Cart Page what travel range you would like the fork at, choices are from 130mm to 170mm as well as your riding weight. The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses. Do you want to know what suspension that fits your bike? Use Öhlins Performance Suspension Guide, it will also recommend a personal set up. Features: TTX 18 cartridge kit Coil: Travel 130mm - 170mm Independent spring system Independent damper system 36mm upper tube diameter Overall improvements for reducing friction Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Coil Suspension Fork
Mpn: FGMTB 3617 2070by Ohlins
—$1,350
Please, specificy in the Notes/Special Instructions section of the Cart Page what travel range you would like the fork at, choices are from 130mm to 170mm as well as your riding weight. The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses. Do you want to know what suspension that fits your bike? Use Öhlins Performance Suspension Guide, it will also recommend a personal set up. Features: TTX 18 cartridge kit Coil: Travel 130mm - 170mm Independent spring system Independent damper system 36mm upper tube diameter Overall improvements for reducing friction Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Coil Suspension Fork
Mpn: FGMTB 3617 2020by Ohlins
—$1,245
The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork
Mpn: FGMTB 3616 2060by Ohlins
—$1,245
The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork
Mpn: FGMTB 3617 2060by Ohlins
—$1,245
The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork
Mpn: FGMTB 3615 2010by Ohlins
—$1,245
The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork
Mpn: FGMTB 3616 2061by Ohlins
—$1,245
The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork
Mpn: FGMTB 3616 2010by Ohlins
—$899.99
The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork
Mpn: FGMTB 3615 2061by Ohlins
—$1,245
The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork
Mpn: FGMTB 3617 2061by Ohlins
—$1,245
The race-proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro racecourses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low-speed compression and low-speed rebound. For high-speed compression you get 3 clicks plus a climb mode setting. Retuned twin-piston three-chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the racecourses Features: TTX-technology Independent spring system Independent damper system 36 mm upper tube diameter Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 553mm Axle to Crown Ohlins RXF36 m.2 Suspension Fork
Mpn: FGMTB 3615 2011by Ohlins
Suspension nowadays can be very confusing, especially with front and rear suspension bikes. So let's break it down and talk about front suspension forks. Some of the top brands we sell are Rockshox and Fox, but there are smaller brands making amazing products like Marzocchi, MRP, Ohlins, DVO, and Manitou. There are also some brands that make great upgrades or additions to forks like Push, MRP, and Vorsprung. There are a few different categories of suspension forks: short travel forks for XC riding, mid-travel forks for Trail riding, long travel forks for Enduro and Freeriding and dual crown forks for Downhill bikes.
Rockshox has XC models like the Recon Silver, Judy Silver, Judy Gold, Reba, Sid Select, Sid Ultimate & Bluto for fat bikes. Their Trail/Enduro models include the 35 Gold, Revelation, Yari, Pike, and Lyrik to the Boxxer, which is Rockshox’s dual crown downhill fork. Fox’s fork lineup is a bit easier to learn, with the Fox 32 being for XC, the Fox 34 for anything from XC to Trail, the Fox 36 for Aggressive Trail/Enduro, the Fox 38 for Enduro/Freeride and the Fox 40 for Downhill. Some of our other popular forks include the Ohlins RXF36, MRP Ribbon and Marzocchi Z1. These are all really great forks for Trail/Enduro use.
Along with complete suspension forks, there are also upgrade parts, like new dampers and air springs such as: Rockshox Charger2.1 RC2 and Charger 3, and Rockshox Debonair air spring, Fox Grip2 and Fox Evol air spring. Other brands like Push make coil conversion kits like the Push ACS3 and also damper upgrade parts like the Push HC97. Once ridden, you will also need service parts, and we offer a full range of service parts for all these brands, like fork seals, oil, and rebuild kits to make your suspension feel like new again. Suspension compatibility can be tricky, so if you have any questions just contact us or call at (805) 375-4525.
© 2024 Worldwide Cyclery