- Shop
- Bikes / Frames
-
Components
- Tires / Tubes / Sealant / Valves
- Forks / Parts
- Rear Shocks / Parts
- Groupsets / Drivetrain Bundles
- Drivetrain
- Shifters
- Handlebars / Grips
- Stems
- Brakes / Pads / Adaptors
- Seatposts / Clamps / Levers
- Saddles / Seats
- Pedals / Cleats / Parts
- Wheels / Hubs / Rims
- Headsets / Parts
- Cables / Housing
-
Accessories
- Tools / Lube / Solvents
- Car / Truck Racks / Tailgate Pads
- Frame Straps
- Pumps / Inflation
- Chainstay / Frame Protectors / Fenders
- Computers / GPS / Electronics
- Hydration Packs / Bags
- Lights
- Water Bottles / Cages
- Gift Ideas / Novelties
- Indoor Trainers
- Bike Travel / Shipping Cases
- Nutritionals
- Locks
- Storage Racks / Stands
-
Apparel
- Helmets
- Jerseys
- Shorts / Bibs
- Gloves
- Shoes / Socks
- Pads / Protective Gear
- Pants
- Eyewear
- Chamois / Short Liners / Base Layer
- Chamois Creams / Embrocations / Butt'r
- Jackets / Vests / Hoodies / Flannels
- Casual Wear
- Headwear
- Brands
- Top Secret Sales (Do Not Tell!)
- Watch
- Read
- My Account
- Help / FAQ's
- Contact Us / Locations
- Call Us | 1-805-375-4525
- Why Shop With Us?
- About Us
- Continue Shopping
- Your Cart is Empty
DT Swiss
Showing 739 products
-
DT Swiss 54T Star Ratchet Upgrade Kit - Ratchet System / LN
—$149.70
The DT Swiss 54T Star Ratchet Upgrade Kit is for compatible traditional Ratchet System and Ratchet LN rear hubs. Kit HWTXXX00NSK54S includes two 54-tooth ratchets, two springs and grease. It does not fit Ratchet EXP, EXP OS or DEG hubs. For the right hub, it shortens the gap before the freehub engages when you get back on the pedals. What changes with 54 teeth? At the freehub, 54 evenly spaced engagement positions work out to about 6.7 degrees between engagements. An 18T system has 20 degrees and a 36T system has 10 degrees. That is freehub engagement angle, not a fixed amount of crank movement; the gear you are in affects what you feel at the pedals. If your hub already has 54T ratchets, this is a replacement kit rather than an engagement upgrade. Will it fit my DT Swiss 350, 240 or 370 hub? This is kit HWTXXX00NSK54S for the traditional two-ratchet DT Swiss Ratchet System and compatible Ratchet LN hubs. It is not for Ratchet EXP, EXP OS or Ratchet DEG. A hub marked 240, 350 or 370 is not enough information on its own, because different generations use different internals. An unconverted three-pawl hub needs the appropriate Ratchet LN conversion; these two ratchets alone do not perform that conversion. Check your hub’s exact version through DT Swiss before ordering. During service, follow the hub’s lubrication instructions and use the specified ratchet grease. The kit includes grease, but it does not replace worn bearings or solve every cause of rough running. See how it works Watch our DT Swiss 54T ratchet kit overview and installation video for a closer look at the mechanism. The video predates some newer DT hub systems, so use the compatibility information above for this kit. Two 54T star ratchets Two springs and ratchet grease Approximately 6.7-degree freehub engagement spacing For compatible Ratchet System / Ratchet LN hubs Item Specifications Ratchet teeth 54 Ratchets included 2 Springs included 2 Grease Included Manufacturer part number HWTXXX00NSK54S
Mpn: 7630033834650by DT Swiss
-
DT Tubeless Ready Tape - 32mm x 10m, Black
—$37.30
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.Highly resistant adhesive tape works as a rim tape and airseal Item Specifications Rim Strip Width (mm) 32 Unit of Sale Retail-Single MPN: TVX3210S29846S
Mpn: 7630033834308by DT Swiss
-
DT Swiss XD End Caps for 12mm Thru Axle hubs: fits 180, 240, 350, 440
—$55.30
DT Swiss Rear Axle Conversion Kits Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. Remember that all DT Swiss hubs can be converted. Used for 12 x 142mm, 148mm, 157mm, 177mm, 197mm hub spacing End caps do not convert non-Boost hubs to Boost 148mm spacing. DT 142x12mm and 148x12mm hubs simply share the same end caps Item Specifications Rear Axle Type 12mm Thru-axle MPN: HWGXXX00S3188S
Mpn: 7630024346124by DT Swiss
-
DT Swiss Special Grease - 20g Tube
—$22.99
DT Swiss Grease for star ratchets on DT-Swiss/Hugi hubs.For star ratchets Item Specifications Application Type Tube Case Pack No MPN: HXT10032508S
Mpn: 7613052329710by DT Swiss
-
DT Swiss Rear End Caps - QR x 135/142mm for Shimano HG Driver
—$55.30
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted. For 2011+ rear hubs Converts 142mm Thru Axle to 135mm QR, or 148mm Thru Axle to 141mm QR Item Specifications Rear Axle Type Standard QR Rear Hub Spacing (mm) 135 Rear Hub Spacing (mm) 142 MPN: HWGXXX0001528S
Mpn: 7613052256252by DT Swiss
-
DT Swiss 2.0 x 12mm Black Brass Nipples, Box of 100
—$20.99
DT Brass Nipples 12mm32 brass nipples weigh approximately 30 grams Item Specifications Color Black Unit of Sale Box of 100 Weight 937.5mg Length 12mm Material Brass Comments Cold forged and machined Spoke Diameter 2.0mm Defined Color Black MPN: N0BA20120S0100
Mpn: 7613052135182by DT Swiss
-
DT Swiss Front End Caps - 15 x 100mm/110mm Boost
—$55.30
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set. End caps are compatible with DT Swiss 350/370 series hubs Fits boost and non-boost hubs Item Specifications Front Axle Type 15mm Thru x 100mm MPN: HWGXXX0004785S
Mpn: 7613052278773by DT Swiss
-
DT Swiss 6902 Bearing
—$20.99
Bearings for maintaining and rebuilding DT Swiss hubs. Item Specifications Bearing I.D. (mm) 15 Bearing O.D. (mm) 28 Thickness 7 MPN: HSBXXX00N2336S
Mpn: 7613052113975by DT Swiss
-
DT Swiss XD Freehub Body For Star Ratchet Hubs Includes Drive Side XD End Cap For 240/350 hubs
—$115.30
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.End Cap Included Item Specifications Cassette Body Type SRAM XD Material Aluminum Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 MPN: HWYAAL00S3188S
Mpn: 7630024345066by DT Swiss
-
DT Swiss Ratchet Freehub Body - Shimano Micro Spline MTN, Light, Aluminum, Sealed Bearing, Kit w/ End Cap, 12 x 142/148
—$115.30
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. Includes end cap for 12 x 142 and 12 x 148mm hubs Fits Shimano 12-speed Micro Spline cassettes Crafted from lightweight aluminum Compatible with 12mm thru-axles Item Specifications Cassette Body Type Shimano Micro Spline Material Aluminum Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 Rear Hub Spacing (mm) 148 MPN: HWYABL00S2562S
Mpn: 7613052282879by DT Swiss
-
DT Swiss Squorx Spoke Wrench - T-Handle
—$25.99
Squorx nipple drivers for wheelbuilding and servicing DT wheels with Squorx nipples (Spline One).MPN: TTSXXXXS05630S
Mpn: 7630024358288by DT Swiss
-
DT Swiss XD Freehub Body for Ratchet Drive Hubs with End Cap Kit for 240/350/440
—$89.70
DT Swiss XD freehub and endcap kitDT Swiss Rear Axle Conversion Kits Also used for 12 x 157mm, 12 x 177mm and 12 x 197mm spacing DT 12 x 142mm and 12 x 148mm rear hubs use the same end caps End caps do not convert non-Boost hubs to Boost 148mm spacing. DT 142x12mm and 148x12mm hubs simply share the same end caps Item Specifications Rear Axle Type 12mm Thru-axle DT Swiss XD Drivers If you are changing from a Shimano Freehub body, you will need new end caps; see below Item Specifications Material Alloy Cassette Body Type SRAM XD 11/12 Speed MPN: HWRAAX00S3114S/HWGXXX00S3188S
Mpn:by DT Swiss
-
DT Swiss Tubeless Tape 29mm x 10meter
—$37.30
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.Highly resistant adhesive tape works as a rim tape and airsealMPN: TVX2910S29810S
Mpn: 7630024334121by DT Swiss
-
DT Swiss 12 x 100mm Thru Axle End Caps, Fits 350 15 x 100mm Front Hubs
—$55.30
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set. Compatible with 15x100mm 350 hubs and R23/R24 wheels with either a 15x100mm or 9x100mm DT Swiss thru bolt front hub End cap and dust seal must be removed from hub prior to installing 12x100mm end caps Item Specifications Front Axle Type 12mm Thru x 100mm Front Axle Type 15mm Thru x 100mm MPN: HWGXXX00S6885S
Mpn: 7630033835206by DT Swiss
-
DT Swiss 3-Pawl Freehub Body - SRAM XD, Standard, Aluminum / Steel, Sealed Bearing, No End Cap
—$79.10
Replacement freehub bodies for hubs and wheels that utilize the DT Swiss 3-Pawl system.End Cap Sold Separately Item Specifications Cassette Body Type SRAM XD Material Aluminum Material Steel MPN: HWRABM00S3869S
Mpn: 7630024365989by DT Swiss
-
DT Swiss Torque Caps - 350/1700/1900
—$55.30
Torque caps increase the contact surface area between frame and fork resulting in a stronger and stiffer interface and more control. Fits all 15mm thru axle 350 hubs as well as 1700 and 1900 series front wheels Does not fit QR hubs Allows for easy installation on Rock Shox Torque Cap compatible forks MPN: HWGXXX0009100S
Mpn: 7630033858960by DT Swiss
-
DT Swiss 3-Pawl Freehub Body - Shimano Micro Spline, Standard, Steel, Sealed Bearing, Kit w/ End Cap, 12 x 142/148 mm
—$131.70
Replacement freehub bodies for hubs and wheels that utilize the DT Swiss 3-Pawl system.End Cap Included Item Specifications Cassette Body Type Shimano Micro Spline Material Steel Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 Rear Hub Spacing (mm) 148 MPN: HWYABM00S4934S
Mpn: 7613052291802by DT Swiss
-
DT Swiss Tubeless Tape 25mm x 10meter
—$34.30
DT Swiss Tubeless Conversion Rim Tape & KitsMPN: TVX2510S29809S
Mpn: 7630024334114by DT Swiss
-
DT Swiss Spacer Sleeve - 15.4mm, for ratchet
—$11.99
DT Swiss Other Hub Parts Item Specifications Fits 240 MPN: HCDXXX00S1077S
Mpn: 840121029814by DT Swiss
-
DT Swiss Center Lock to 6-Bolt Disc Adaptor for 15mm and 20mm Thru Axle
—$31.30
DT-Swiss CenterLock adaptor. Allows 6-bolt rotors to be used on CenterLock hubs. maximum rotor size 230 mm Rotor thickness between 1.8mm and 2.2mm Easy assembly and only 29g Made in Switzerland by DT Swiss MPN: HWZXXX00S1232S
Mpn: 7613052217192by DT Swiss
-
DT Swiss Front End Caps - QR/12/15 x 100mm, 350, 370
—$55.30
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set. Plug-in end caps Converts 12/15x100mm thru axle front hubs to QR Item Specifications Front Axle Type 12mm Thru-axle Front Axle Type 15mm Thru MPN: HWGXXX00S3801S
Mpn: 7630033835220by DT Swiss
-
DT Swiss Standard Spoke Nipples - Brass, 2.0 x 12mm, Silver, Box of 100
—$18.99
DT Brass Nipples 12mm32 brass nipples weigh approximately 30 grams Item Specifications Color Silver Unit of Sale Box of 100 Weight 937.5mg Length 12mm Material Brass Comments Cold forged and machined Spoke Diameter 2.0mm Defined Color Silver MPN: N0BA20120N0100
Mpn: 7613052135410by DT Swiss
-
DT Swiss Competition Spoke: 2.0/1.8/2.0mm, 304mm, Straight Pull, Black, Box of 20
—$27.99
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. Double Butted: 2.0/1.8/2.0 Compatible with straight pull hubs only One 264mm spoke = 5.9g Nipples sold separately Item Specifications Color Black Defined Color Black Length 304 Spoke Interface Straight Pull Spoke Profile Double Butted Thread Diameter 2.0 MPN: SCOS20304S0020
Mpn: 7630024344854by DT Swiss
-
DT Swiss 350/370 Hub Tool Kit: for 15 x 100 and 15 x 110 Hubs
—$83.80
High quality hub tools designed to work with DT Swiss components.MPN: HWTXXX00N5290S
Mpn: 7630024358103by DT Swiss
-
DT Swiss 6802 Bearing
—$20.99
Bearings for maintaining and rebuilding DT Swiss hubs. Genuine DT replacement steel bearings; 240s quality Replacement bearing for non-drive side of many 240s rear hubs Item Specifications Bearing I.D. (mm) 15 Bearing O.D. (mm) 24 Manufacturer Number 6802 Material Steel Thickness 5 MPN: HSBXXX00N2464S
Mpn: 7613052251738by DT Swiss
-
DT Swiss 142/148 x 12mm Thru Axle end caps for 2011+ 180, 240, 350 and 440
—$55.30
DT Swiss Rear Axle Conversion KitsConverts the 135x12mm hub to 142x12 and the 150x12 to a 157x12mm Item Specifications Fits 180, 190, 240s, 350, 440 Rear Axle Type 12mm Thru-axle Rear Hub Spacing 142,157mm MPN: HWGXXX0002193C
Mpn: 7613052123875by DT Swiss
-
DT Swiss Aluminum Freehub Body Shimano 11 Speed fits 180 190 240 350 & 440 hubs
—$94.30
DT Swiss Shimano 11 Speed Freehub Bodies Item Specifications Fits DT Swiss 180 / 190 / 240 / 350 Converts to Shimano/ Sram 11 MPN: HWYABX00S2775S
Mpn: 7630013967262by DT Swiss
-
DT Swiss Tubeless Tape 27mm x 10meter
—$34.30
DT Swiss Tubeless Conversion Rim Tape & KitsMPN: TVX2710S29813S
Mpn: 7630024335135by DT Swiss
-
DT Swiss Ratchet Freehub Body - SRAM XDR, Standard, Aluminum, Sealed Bearing, Kit w/ End Cap, 12 x 142 mm
—$115.30
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. Fits SRAM XDR 12-speed cassette types Crafted from lightweight aluminum Compatible with 12mm thru-axles Includes end cap for 12 x 142 hubs Weight: 46 g Item Specifications Cassette Body Type SRAM XD Cassette Body Type SRAM XDR Material Aluminum Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 MPN: HWYAAX00S8888S
Mpn: 7613052230863by DT Swiss
-
DT Swiss XD End Caps for 135mm QR hubs: fits 240, 350, 440
—$55.30
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.135mm QR end cap kit for DT 240, 350 and 440 hubs with XD Driver for SRAM 11-speed cassette Item Specifications Rear Axle Type Standard QR Rear Hub Spacing (mm) 135 MPN: HWGXXX00S3115S
Mpn: 7630024346148by DT Swiss
-
DT Swiss 240 Disc Ring Nut
—$17.99
DT Swiss Other Hub Parts Item Specifications Fits 240 MPN: HXDXXX00N1131S
Mpn: 7613052165578by DT Swiss
-
DT Swiss Ring Nut Removal Tool~ works with all star ratchet hubs
—$86.80
High quality hub tools designed to work with DT Swiss components.MPN: HXTXXX00N5027S
Mpn: 7613052136394by DT Swiss
-
DT Swiss Spokey Pro Spoke Wrench
—$39.70
DT Swiss Spoke WrenchesMPN: TTSXXXXR05664S
Mpn: 7630033837903by DT Swiss
-
DT Swiss Service Kit - 3-Pawl
—$15.99
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.Includes all parts needed for repair or replacementMPN: HWTXXX00NSK3PS
Mpn: 7630024355324by DT Swiss
-
DT Swiss RWS MTB Front Thru Axle - 12 x 100mm, Overall Length 121mm, M12 x 1.5mm Thread Pitch, Flat Washer
—$44.90
The patented RWS wheel mounting system from DT Swiss is a stiffer, safer and more user friendly option than conventional quick releases. Washer shape: Flat Ratcheting system tightens skewers with turns rather than cam Lever can be rotated into an ideal position after tightening Alloy axle and lever Item Specifications Axle Diameter (mm) 12 Color Black Over Locknut (mm) 100 Overall Length (mm) 121 Thread Length (mm) 13 Thread Pitch 1.5 MPN: HWQASM00S2023S
Mpn: 7613052097633by DT Swiss
-
DT Swiss Cassette Seal: Fits all ratchet drive hubs
—$19.99
DT Swiss Other Hub PartsFits DT Swiss and hubs based on design Item Specifications Fits 98,240 MPN: HSOXXX00N1031S
Mpn: 7613052095196by DT Swiss
-
DT Swiss ProLock 2.0 x 12mm Black Brass Nipples, Box of 100
—$33.58
Two-component adhesive in nipple threads prevent loosening. Cold forged and machined ProLock nipples contain a special adhesive compond (Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond 32 alloy nipples weigh approximately 10 grams 32 brass nipples weigh approximately 30 grams Item Specifications Color Black Unit of Sale Box of 100 Weight 937.5mg Length 12mm Material Brass Comments Cold forged and machined Spoke Diameter 2.0mm Defined Color Black MPN: NPBA20120S0100
Mpn: 7613052171913by DT Swiss
-
DT Swiss Competition Spoke: 2.0/1.8/2.0mm, 302mm, Straight Pull, Black, Box of 20
—$27.99
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. Double Butted: 2.0/1.8/2.0 Compatible with straight pull hubs only One 264mm spoke = 5.9g Nipples sold separately Item Specifications Color Black Defined Color Black Length 302 Spoke Interface Straight Pull Spoke Profile Double Butted Thread Diameter 2.0 MPN: SCOS20302S0020
Mpn: 7630024325716by DT Swiss
-
DT Swiss Pro Head Reinforcement Washers for Spline One Rims, Box of 100
—$21.99
Pro Head Reinforcement System (PHR) has a larger and more spherical contact area and is designed to balance loads transferred to the rim. The PHR system acts like a ball and socket interface allowing the spoke to pivot and follow the perfect trajectory from hub to rim.MPN: WSZXX10051297S
Mpn: 7630024364562by DT Swiss
-
DT Swiss Competition Spoke: 2.0/1.8/2.0mm, 284mm, Straight Pull, Black, Box of 20
—$27.99
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. Double Butted: 2.0/1.8/2.0 Compatible with straight pull hubs only One 264mm spoke = 5.9g Nipples sold separately Item Specifications Color Black Defined Color Black Length 284 Spoke Interface Straight Pull Spoke Profile Double Butted Thread Diameter 2.0 MPN: SCOS20284S0020
Mpn: 7630024311009by DT Swiss
-
DT Swiss Ring Nut Removal Tool - 3-Pawl
—$86.80
High quality hub tools designed to work with DT Swiss components.Ring Nut removal tool for DT Swiss 3-pawl rear hubsMPN: HXTXXX00N5266S
Mpn: 7630024333100by DT Swiss
-
DT Swiss RWS MTB Front Quick Release - QR x 100mm, Steel
—$44.90
DT Swiss RWS Steel Front Quick Release Skewers. Up to 50% more clamping force than standard quick releases Lever can be placed in an ideal position Chromoly shaft, composite blade Ratcheting system tightens skewers with turns rather than cam Item Specifications Color Black Weight 50g Front Axle Type 9x1 MPN: HWQASM00S2932S
Mpn: 7630013912651by DT Swiss
-
DT Swiss RWS MTB Rear Thru Axle - 12 x 148mm, Overall Length 173.7mm, M12 x 1.0mm Thread Pitch, Flat Washer
—$44.90
The patented RWS wheel mounting system from DT Swiss is a stiffer, safer and more user friendly option than conventional quick releases. Washer shape: Flat Ratcheting system tightens skewers with turns rather than using a cam Lever can be rotated into an ideal position after tightening Alloy axle and lever Item Specifications Axle Diameter (mm) 12 Color Black Over Locknut (mm) 148 Overall Length (mm) 173.7 Thread Length (mm) 13 Thread Pitch 12 x 1 Weight 64 MPN: HWQASM00S2155S
Mpn: 7613052055046by DT Swiss
-
DT Swiss 135mm QR End Cap Kit for Straight Pull 11-Speed Road Disc Hubs
—$55.30
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted. These end caps are specific to 11-speed road freehub bodies/cassettes and are not compatible with 9/10 speed mountain hubs End caps work with Straight Pull 11-speed road hubs and road disc wheels Item Specifications Rear Axle Type Standard QR Rear Hub Spacing (mm) 135 MPN: HWGXXX0006383S
Mpn: 7630033807401by DT Swiss
-
DT Swiss 3-Pawl Freehub Body - SRAM XD, Standard, Aluminum / Steel, Sealed Bearing, Kit w/ End Cap, 12 x 142 mm
—$115.30
Replacement freehub bodies for hubs and wheels that utilize the DT Swiss 3-Pawl system.End Cap Included Item Specifications Cassette Body Type SRAM XD Material Aluminum Material Steel Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 MPN: HWYAAM00S3909S
Mpn: 7630024367044by DT Swiss
-
DT Swiss Star Ratchet Spring
—$9.99
Parts for repair and maintenance of DT Swiss hubs.MPN: HXDXXX00N1087S
Mpn: 7613052115665by DT Swiss
-
DT Swiss Squorx Pro Head 2.0 x 15mm Black Alloy Nipple, Box of 100
—$57.18
The DT Squorx Pro Head nipple combines ease of use, lightweight and optimum performance in a single product. The Torx head facilitates wheelbuilds with bladed spokes while the spherical contact area perfectly aligns the nipple with the spoke. The square interface finally allows for easy truing with standard tools when the tire is mounted.32 nipples weigh approximately 14g Item Specifications Color Black Defined Color Black Length 15 Material Alloy Spoke Diameter 2.0 MPN: N0AH20150S0100
Mpn: 7630024368515by DT Swiss
-
DT Swiss Competition Spoke: 2.0/1.8/2.0mm, 306mm, Straight Pull, Black, Box of 20
—$27.99
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. Double Butted: 2.0/1.8/2.0 Compatible with straight pull hubs only One 264mm spoke = 5.9g Nipples sold separately Item Specifications Color Black Defined Color Black Length 306 Spoke Interface Straight Pull Spoke Profile Double Butted Thread Diameter 2.0 MPN: SCOS20306S0020
Mpn: 7630024311047by DT Swiss
-
DT Swiss 3-Pawl Freehub Body - Shimano HG 11 MTN, Standard, Steel, Sealed Bearing, No End Cap
—$75
Replacement freehub bodies for hubs and wheels that utilize the DT Swiss 3-Pawl system.End Cap Sold Separately Item Specifications Cassette Body Type Shimano HG Material Steel MPN: HWRAAMWSS0342S
Mpn: 7613052039329by DT Swiss
-
DT Swiss 3-Pawl Freehub Body - Shimano HG 11 Road, Standard, Aluminum / Steel, Sealed Bearing, Kit w/ End Cap, 12 x 142
—$94.30
Replacement freehub bodies for hubs and wheels that utilize the DT Swiss 3-Pawl system.End Cap Included Item Specifications Cassette Body Type Shimano HG 11/12-Speed Road Material Aluminum Material Steel Rear Axle Type 12mm Thru-axle Rear Hub Spacing (mm) 142 MPN: HWYABM00S6152S
Mpn: 7630024381989by DT Swiss
1 2 3 … 15 Next »
DT Swiss 54T Star Ratchet Upgrade Kit - Ratchet System / LN
DT Tubeless Ready Tape - 32mm x 10m, Black
DT Swiss XD End Caps for 12mm Thru Axle hubs: fits 180, 240, 350, 440
DT Swiss Special Grease - 20g Tube
DT Swiss Rear End Caps - QR x 135/142mm for Shimano HG Driver
DT Swiss 2.0 x 12mm Black Brass Nipples, Box of 100
DT Swiss Front End Caps - 15 x 100mm/110mm Boost
DT Swiss 6902 Bearing
DT Swiss XD Freehub Body For Star Ratchet Hubs Includes Drive Side XD End Cap For 240/350 hubs
DT Swiss Ratchet Freehub Body - Shimano Micro Spline MTN, Light, Aluminum, Sealed Bearing, Kit w/ End Cap, 12 x 142/148
DT Swiss Squorx Spoke Wrench - T-Handle
DT Swiss XD Freehub Body for Ratchet Drive Hubs with End Cap Kit for 240/350/440
DT Swiss Tubeless Tape 29mm x 10meter
DT Swiss 12 x 100mm Thru Axle End Caps, Fits 350 15 x 100mm Front Hubs
DT Swiss 3-Pawl Freehub Body - SRAM XD, Standard, Aluminum / Steel, Sealed Bearing, No End Cap
DT Swiss Torque Caps - 350/1700/1900
DT Swiss 3-Pawl Freehub Body - Shimano Micro Spline, Standard, Steel, Sealed Bearing, Kit w/ End Cap, 12 x 142/148 mm
DT Swiss Tubeless Tape 25mm x 10meter
DT Swiss Spacer Sleeve - 15.4mm, for ratchet
DT Swiss Center Lock to 6-Bolt Disc Adaptor for 15mm and 20mm Thru Axle
DT Swiss Front End Caps - QR/12/15 x 100mm, 350, 370
DT Swiss Standard Spoke Nipples - Brass, 2.0 x 12mm, Silver, Box of 100
DT Swiss Competition Spoke: 2.0/1.8/2.0mm, 304mm, Straight Pull, Black, Box of 20
DT Swiss 350/370 Hub Tool Kit: for 15 x 100 and 15 x 110 Hubs
DT Swiss 6802 Bearing
DT Swiss 142/148 x 12mm Thru Axle end caps for 2011+ 180, 240, 350 and 440
DT Swiss Aluminum Freehub Body Shimano 11 Speed fits 180 190 240 350 & 440 hubs
DT Swiss Tubeless Tape 27mm x 10meter
DT Swiss Ratchet Freehub Body - SRAM XDR, Standard, Aluminum, Sealed Bearing, Kit w/ End Cap, 12 x 142 mm
DT Swiss XD End Caps for 135mm QR hubs: fits 240, 350, 440
DT Swiss 240 Disc Ring Nut
DT Swiss Ring Nut Removal Tool~ works with all star ratchet hubs
DT Swiss Spokey Pro Spoke Wrench
DT Swiss Service Kit - 3-Pawl
DT Swiss RWS MTB Front Thru Axle - 12 x 100mm, Overall Length 121mm, M12 x 1.5mm Thread Pitch, Flat Washer
DT Swiss Cassette Seal: Fits all ratchet drive hubs
DT Swiss ProLock 2.0 x 12mm Black Brass Nipples, Box of 100
DT Swiss Competition Spoke: 2.0/1.8/2.0mm, 302mm, Straight Pull, Black, Box of 20
DT Swiss Pro Head Reinforcement Washers for Spline One Rims, Box of 100
DT Swiss Competition Spoke: 2.0/1.8/2.0mm, 284mm, Straight Pull, Black, Box of 20
DT Swiss Ring Nut Removal Tool - 3-Pawl
DT Swiss RWS MTB Front Quick Release - QR x 100mm, Steel
DT Swiss RWS MTB Rear Thru Axle - 12 x 148mm, Overall Length 173.7mm, M12 x 1.0mm Thread Pitch, Flat Washer
DT Swiss 135mm QR End Cap Kit for Straight Pull 11-Speed Road Disc Hubs
DT Swiss 3-Pawl Freehub Body - SRAM XD, Standard, Aluminum / Steel, Sealed Bearing, Kit w/ End Cap, 12 x 142 mm
DT Swiss Star Ratchet Spring
DT Swiss Squorx Pro Head 2.0 x 15mm Black Alloy Nipple, Box of 100
DT Swiss Competition Spoke: 2.0/1.8/2.0mm, 306mm, Straight Pull, Black, Box of 20
DT Swiss 3-Pawl Freehub Body - Shimano HG 11 MTN, Standard, Steel, Sealed Bearing, No End Cap
DT Swiss 3-Pawl Freehub Body - Shimano HG 11 Road, Standard, Aluminum / Steel, Sealed Bearing, Kit w/ End Cap, 12 x 142
DT Swiss Wheels, Hubs, Rims & Parts
Shop DT Swiss components for a wheel build, a replacement wheel or the next hub service. The range includes wheels, hubs, rims, spokes, freehub bodies, bearings and small parts. Whether you're building around a 350 hub or servicing a 240, identify the exact model before ordering.
Building or Replacing a Wheel
Match wheel diameter, axle spacing, cassette interface and rotor mount to your bike. For a custom build, hub and rim spoke counts need to match, and spoke length depends on the exact combination. Compare rim width, tire compatibility and intended use alongside weight.
Shopping for a complete pair? Browse wheelsets, or look through individual front wheels and rear wheels. Talk with our team if you're planning a custom wheel build.
Ratchet Kits, Freehubs and Service Parts
DT Swiss uses several hub systems, including Ratchet, Ratchet LN, Ratchet EXP and Ratchet DEG. Identify your hub's system and generation before choosing an engagement upgrade or replacement freehub. A higher tooth count isn't a universal fit, and the cassette interface is only one part of freehub-body compatibility.
Check end caps, axle dimensions, bearing sizes and the specified lubricant when servicing a hub. If the part names are getting confusing, send us your wheel or hub model and any product identification details. That's more useful than ordering a kit because it looks like the old one.
--- Shop Info ---
Newsletter Signup -
© 2026 Worldwide Cyclery
