—$679
The World Cup proven DHX2 is full of features, delivering ultimate performance and control when the trail gets steep. A Ti-Nitride coating provides a smooth and ultra-durable finish, while the Advanced RVS damping system improves damping, control and consistency with even more tunability. High- and low-speed compression and high- and low-speed rebound adjustment Advanced Rod Valve System (RVS) damping provides more tunability High oil flow improves damping control and consistency X2 2-position Open/Firm lever retains high and low speed compression adjustment Coil spring sold separately Item Specifications External Adjustments Coil Preload External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 205 Eyelet Diameter (mm) Trunnion, 12.7 Lockout Switch Shock Mounted Switch Positive Spring Coil Stroke (mm) 60 FOX DHX2 Factory Rear Shock Rear Shock UPC: 821973478913
Mpn: 978-01-577by FOX
—$699
The Award-Winning FLOAT X2 is full of features, delivering ultimate performance and control when the going gets rough. The Genuine Kashima Coating provides a buttery smooth and ultra-durable surface, combined with the XV EVOL air spring and Advanced RVS damping for more tunability. Genuine Kashima Coat on air sleeve and body XV EVOL air sleeve with 300psi max Progressive bottom-out bumper X2 2-position Open/Firm lever retains high and low speed compression adjustment High- and low-speed compression and high- and low-speed rebound adjustment Advanced Rod Valve System (RVS) damping system provides more tunability Angled tank valve to improve pump clearance Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 230 Eyelet Diameter (mm) 12.7 Lockout Switch Shock Mounted Switch Metric Yes Positive Spring Air Stroke (mm) 60 FOX FLOAT X2 Factory Rear Shock Rear Shock UPC: 821973478869
Mpn: 979-01-121by FOX
—$599
Factory says it all - feature-packed and designed to exceed the demands of Factory-level riders, but ready for everyone. Kashima Coat All-new chassis and damper High-flow main piston, air seal package Volume spacers with smaller increments and MCU bottom out bumper Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster Independent firm mode circuit Clockable 2 position adjuster, Increased rebound adjuster range (over DPX2) Optimized reservoir lengths per shock size Hydraulic top out feature, Reduced damper noise Bearing hardware compatible both sides, Air valve location offers improved frame fitment and pump access Item Specifications External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 190 Eyelet Diameter (mm) 12.7 Lockout Switch Shock Mounted Switch Metric Yes Positive Spring Air Stroke (mm) 45 FOX Float X Factory Rear Shock Rear Shock UPC: 821973478401
Mpn: 979-01-085by FOX
—$599
Factory says it all - feature-packed and designed to exceed the demands of Factory-level riders, but ready for everyone. Kashima Coat All-new chassis and damper High-flow main piston, air seal package Volume spacers with smaller increments and MCU bottom out bumper Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster Independent firm mode circuit Clockable 2 position adjuster, Increased rebound adjuster range (over DPX2) Optimized reservoir lengths per shock size Hydraulic top out feature, Reduced damper noise Bearing hardware compatible both sides, Air valve location offers improved frame fitment and pump access Item Specifications External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 230 Eyelet Diameter (mm) 12.7 Lockout Switch Shock Mounted Switch Metric Yes Positive Spring Air Stroke (mm) 60 FOX Float X Factory Rear Shock Rear Shock UPC: 821973478500
Mpn: 979-01-090by FOX
—$499
FLOAT answers the demands of the modern trail rider; a firm pedal platform for uphill efficiency and confidence-inducing, trail-hugging descent capability, all in a lightweight package. Trail riders seek a shock with the performance of a Float X but with lightweight capability like that found in the Float SL. Yet there is nothing middle-of-the-road about FLOAT. With its large volume EVOL air spring, riders can run their shock at lower air pressures for a more linear feel throughout the stroke. This results in smoother small bump performance, better grip at the tires and a shock that will not overheat on the demanding descents. Factory models are feature-packed and designed to exceed the demands of Factory-level riders with slippery smooth, ultra-durable Genuine Kashima Coat Optimized suspension for trail riding - firm platform for pedaling and climbing efficiency without penalizing descending performance New large diameter main piston, valving, and IFP for increased performance, consistency, and tuneability Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity MCU bottom-out bumper for end-stroke progressivity Open, Medium and Firm modes of compression adjustment Adjustable rebound and air spring pressure Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 185 Eyelet Diameter (mm) Trunnion, 12.7 Lockout Switch Shock Mounted Switch Metric Yes Positive Spring Air Stroke (mm) 50 FOX Float Factory Rear Shock Rear Shock UPC: 821973469508
Mpn: 972-01-529by FOX
—$499
FLOAT answers the demands of the modern trail rider; a firm pedal platform for uphill efficiency and confidence-inducing, trail-hugging descent capability, all in a lightweight package. Trail riders seek a shock with the performance of a Float X but with lightweight capability like that found in the Float SL. Yet there is nothing middle-of-the-road about FLOAT. With its large volume EVOL air spring, riders can run their shock at lower air pressures for a more linear feel throughout the stroke. This results in smoother small bump performance, better grip at the tires and a shock that will not overheat on the demanding descents. Factory models are feature-packed and designed to exceed the demands of Factory-level riders with slippery smooth, ultra-durable Genuine Kashima Coat Optimized suspension for trail riding - firm platform for pedaling and climbing efficiency without penalizing descending performance New large diameter main piston, valving, and IFP for increased performance, consistency, and tuneability Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity MCU bottom-out bumper for end-stroke progressivity Open, Medium and Firm modes of compression adjustment Adjustable rebound and air spring pressure Item Specifications External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (mm) 210 Eyelet Diameter (mm) 12.7 Lockout Switch Shock Mounted Switch Metric Yes Positive Spring Air Stroke (mm) 55 FOX Float Factory Rear Shock Rear Shock UPC: 821973469553
Mpn: 972-01-527by FOX
—$65
34 Air Shaft Assembly FOX 34 Air Shaft Assembly Air Springs & Parts UPC: 821973422497
Mpn: 820-02-600-KITby FOX
—$65
34 Step-Cast Air Shaft Assembly FOX 34 Step-Cast Air Shaft Assembly Air Springs & Parts UPC: 821973422459
Mpn: 820-02-595-KITby FOX
—$60
Top Caps for Fox suspension fork service and repair. FOX Top Caps Adjuster Knob & External Hardware UPC: 611056147191
Mpn: 820-05-606-KITby FOX
—$329
Meet the Transfer SL Performance Elite Dropper Seatpost . At 128 grams (25%!) lighter than the regular Transfer post, it's the lightest mainstream dropper post on the market. Compatible lever options for flat bars, drop bars, and 1x and 2x drivetrains, it (finally) brings the word "shred" into the super lightweight XC and Gravel conversation scene. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. 2-position mechanical post that locks at the top and bottom only Item Specifications Actuation Cable Remote Adjustment Indexed Cable Routing Internal Clamp Style Standard Rails Color Black Anodized Defined Color Black Diameter 31.6 Offset (mm) 0 Travel (mm) 125 FOX Transfer SL Performance Elite Dropper Seatpost Dropper Seatpost UPC: 821973437521
Mpn: 925-01-232by FOX
—$325
FOX 34 Crown/Steerer/Uppertube Assembies for service and repair. FOX 34 Crown/Steerer/Uppertube Assemblies Crown/Steerer/Uppertube Assembly UPC: 821973422640
Mpn: 820-12-411-KITby FOX
—$7.75
Seals for repair of Fox suspension forks. FOX U-Cup Seals Seal Kit UPC: 611056173961
Mpn: 036-01-020by FOX
—$390
FOX 36 Crown/Steerer/Uppertube Assembies for service and repair. FOX 36 Crown/Steerer/Uppertube Assemblies Crown/Steerer/Uppertube Assembly UPC: 821973456041
Mpn: 820-12-537-KITby FOX
—$200
FOX FIT 4 Damper Assembly for FOX suspension fork service and repair. FOX 32 FIT 4 Damper Damper, Compression UPC: 611056183014
Mpn: 820-18-206-KITby FOX
—$3.50
Travel Spacers for rear shock tuning and adjustments. FOX Travel Spacers Rear Shock Part UPC: 611056181584
Mpn: 233-00-291by FOX
—$275
FOX 38 Crown/Steerer/Uppertube Assembies for service and repair. FOX 38 Crown/Steerer/Uppertube Assemblies Crown/Steerer/Uppertube Assembly UPC: 821973395548
Mpn: 820-12-251-KITby FOX
—$9
Replacement parts for Fox rear shock service and repair. FOX Rear Shock Parts Rear Shock Part UPC: 611056177075
Mpn: 210-03-254by FOX
—$315
FOX 36 Crown/Steerer/Uppertube Assembies for service and repair. FOX 36 Crown/Steerer/Uppertube Assemblies Crown/Steerer/Uppertube Assembly
Mpn: 820-12-555-KITby FOX
—$699.99
With a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 Taper-Cast Performance delivers just enough tunable travel to take the edge off of wherever your gravel adventures may lead you. 700c chassis with clearance for large volume tires (50 mm max) Black anodized 7000 series aluminum stanchions and 12x100mm bolt-on thru axle FLOAT EVOL Air Spring and GRIP damper, featuring three on-the-fly settings - Open, Medium, and Firm Lightweight air spring optimized for short-travel Lightweight 32mm Step-Cast chassis with Lower Leg Air/Oil Bypass Channels Integrated full fender mounts (700c x 45 mm max with fender) Performance Series black-on-black graphics package Item Specifications Axle to Crown Length 435 Brake Type Post Mount 160 Color Matte Black Crown Race 40 Defined Color Black External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 12mm Thru x 100mm Lockout Switch Crown Maximum Tire Width 50 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 32 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 40 Weight 1226 Wheel Size 700c FOX 32 Taper-Cast Performance Suspension Fork Suspension Fork UPC: 821973418896
Mpn: 910-20-251by FOX
—$919
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. Updated Crown Design saves up to 20 grams, and offers significant structural improvments Genuine Kashima Coating on upper tubes Low friction seals for improved performance Lower Leg Bleeders and Bypass Channels Floating axles for perfect alignment Item Specifications Axle to Crown Length 554 Brake Type Post Mount 180 Color Shiny Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch None Maximum Tire Width 72 Negative Spring Air Offset 37 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 160 Wheel Size 27.5" FOX 36 Factory Suspension Fork Suspension Fork UPC: 821973436876
Mpn: 910-21-121by FOX
—$919
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. Updated Crown Design saves up to 20 grams, and offers significant structural improvments Genuine Kashima Coating on upper tubes Low friction seals for improved performance Lower Leg Bleeders and Bypass Channels Floating axles for perfect alignment Item Specifications Axle to Crown Length 554 Brake Type Post Mount 180 Color Shiny Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch None Maximum Tire Width 72 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 160 Wheel Size 27.5" FOX 36 Factory Suspension Fork Suspension Fork UPC: 821973436883
Mpn: 910-21-122by FOX
—$859
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. Updated Crown Design saves up to 20 grams, and offers significant structural improvments Genuine Kashima Coating on upper tubes Low friction seals for improved performance Lower Leg Bleeders and Bypass Channels Floating axles for perfect alignment Item Specifications Axle to Crown Length 554 Brake Type Post Mount 180 Color Shiny Black Crown Race 40 Defined Color Black External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch None Maximum Tire Width 72 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 160 Wheel Size 27.5" FOX 36 Factory Suspension Fork Suspension Fork UPC: 821973436890
Mpn: 910-21-123by FOX
—$549
Whether you're racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards Integrated fender and light mounts delivery maximum versatility Clearance for tires up to 2.6 wide 160-230 mm rotor compatible Item Specifications Axle to Crown Length 547 Brake Type Post Mount 180 Color Matte Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 58 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 140 Wheel Size 29" FOX 34 AWL Suspension Fork Suspension Fork UPC: 821973419404
Mpn: 910-21-045by FOX
—$549
Whether you're racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards Integrated fender and light mounts delivery maximum versatility Clearance for tires up to 2.6 wide 160-230 mm rotor compatible Item Specifications Axle to Crown Length 501 Brake Type Post Mount 180 Color Matte Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Crown Maximum Tire Width 58 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 100 Wheel Size 29" FOX 34 AWL Suspension Fork Suspension Fork UPC: 821973418568
Mpn: 910-20-210by FOX
—$15.60
Replacement parts for Fox rear shock service and repair.Sold in Qty 10 Item Specifications keyword search 019-02-021 FOX Rear Shock Parts Rear Shock Part UPC: 821973415024
Mpn: 803-01-650by FOX
—$329
Meet the Transfer SL Performance Elite Dropper Seatpost . At 128 grams (25%!) lighter than the regular Transfer post, it's the lightest mainstream dropper post on the market. Compatible lever options for flat bars, drop bars, and 1x and 2x drivetrains, it (finally) brings the word "shred" into the super lightweight XC and Gravel conversation scene. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. 2-position mechanical post that locks at the top and bottom only Item Specifications Actuation Cable Remote Adjustment Indexed Cable Routing Internal Clamp Style Standard Rails Color Black Anodized Defined Color Black Diameter 27.2 Length 400 Max Height 350 Min Height 248 Offset (mm) 0 Travel (mm) 50 FOX Transfer SL Performance Elite Dropper Seatpost Dropper Seatpost UPC: 821973417448
Mpn: 925-01-203by FOX
—$329
Meet the Transfer SL Performance Elite Dropper Seatpost . At 128 grams (25%!) lighter than the regular Transfer post, it's the lightest mainstream dropper post on the market. Compatible lever options for flat bars, drop bars, and 1x and 2x drivetrains, it (finally) brings the word "shred" into the super lightweight XC and Gravel conversation scene. Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. 2-position mechanical post that locks at the top and bottom only Item Specifications Actuation Cable Remote Adjustment Indexed Cable Routing Internal Clamp Style Standard Rails Color Black Anodized Defined Color Black Diameter 30.9 Length 430 Max Height 355 Min Height 225 Offset (mm) 0 Travel (mm) 75 FOX Transfer SL Performance Elite Dropper Seatpost Dropper Seatpost UPC: 821973417516
Mpn: 925-01-210by FOX
—$679
The World Cup proven DHX2 is full of features, delivering ultimate performance and control when the trail gets steep. A Ti-Nitride coating provides a smooth and ultra-durable finish, while the Advanced RVS damping system improves damping, control and consistency with even more tunability. High- and low-speed compression and high- and low-speed rebound adjustment Advanced Rod Valve System (RVS) damping provides more tunability High oil flow improves damping control and consistency X2 2-position Open/Firm lever retains high and low speed compression adjustment Coil spring sold separately Item Specifications External Adjustments Coil Preload External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Eye to eye length (ins) 7.875 Eye to eye length (mm) 200 Eyelet Diameter (mm) 12.7 Lockout Switch Shock Mounted Switch Metric No Positive Spring Coil Stroke (ins) 2 Stroke (mm) 51 FOX DHX2 Factory Rear Shock Rear Shock UPC: 821973419886
Mpn: 978-01-053by FOX
—$900
The Fox 34 might be the most versatile fork in the Fox lineup. It could be raced in cross country races or set at 140/150mm for aggressive trail riding. The Fox 34 still has two chassis versions, the Fox 34 and the Fox 34SC (step cast). Both get the update but almost start to become two different forks. The Fox 34 features 34mm uppers and a travel range of 120-140mm stock. Only 29” wheels and boost 15 x 110mm hub spacing will be available. For 2022 a lot has changed on the 34, it is basically an entirely new fork to be honest. From the chassis and the design, you get the new arch shape offering more clearance on the headtube and a 58mm crown. Both save weight and stiffen up the chassis. Also new is an updated EVOL air spring to give you more support yet still that buttery feeling off the top. Weight for this new 34 is 1,698g, saving over 70g from the previous 2021 model. The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. Kabolt Thru Axle Step-Cast chassis Genuine Kashima Coating on upper tubes FIT4 damper and FLOAT EVOL air spring Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities Item Specifications Axle to Crown Length 512 Brake Type Post Mount 160 Color Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch Handlebar - Cable Maximum Tire Width 66 Negative Spring Air Offset 51 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 34 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 100 Wheel Size 29" FOX 34 Step-Cast Factory Suspension Fork Suspension Fork UPC: 821973422879
Mpn: 910-21-058by FOX
—$569
Another model to come back into the Fox 2022 lineup is the Fox DHX rear coil shock. After missing for a few years, the DHX is now back and better than ever! The DHX is all new and bridges the gap between the top level Fox Float DHX2 and the set and forget it Marzocchi Bomber CR shock. With that, you get adjustments like a low speed compression adjustment and a 2 position compression lever to help aid that firm/open mode for climbing. Both of those the Marzocchi Bomber do not have, plus you get a more simple setup than the Fox Float DHX2. The DHX is a perfect coil shock for those looking to try out that hyped up coil feel while not spending as much as a Float DHX2 and also getting an easier setup with having some amazing performance!Answering the call of riders seeking the ultimate in plush suspension, the new DHX brings coil-sprung, magic-carpet, trail smoothing performance in a wide range of configurations to the trails and beyond. Specs: ALL-NEW chassis and damper High-flow main piston Numbered Tool-free 12 position single-turn LSC (Low Speed Compression) adjuster Independent firm mode circuit – 2 position adjuster Optimized reservoir lengths per shock size Hydraulic top out feature Reduced damper noise MCU bottom out bumper Single-turn rebound adjuster with a variety of access modes (Tool-free, 3mm hex (direct access), 2mm hex or similar (side access) Spring preload collar with detents and max / min number of clicks and direction arrow Full diameter spring retainer with wire ring (like DHX2) Spring scuff guard on body (like DHX2) Coil spring sold separately FOX DHX Factory Rear Shock Rear Shock UPC: 821973419732
Mpn: 978-01-029by FOX
—$60
FOX Rear Shock Tune Kits FOX Rear Shock Tune Kits Rear Shock Tune Kits UPC: 821973393087
Mpn: 815-02-195-KITby FOX
—$25
Top Caps for Fox suspension fork service and repair. FOX Top Caps Adjuster Knob & External Hardware UPC: 611056146941
Mpn: 820-05-430-KITby FOX
—$18.08
9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 6 Frame Mount Width 25.4 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973390345
Mpn: 803-03-263by FOX
—$18.08
9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 6 Frame Mount Width 32.05 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973390413
Mpn: 803-03-270by FOX
—$18.08
9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 6 Frame Mount Width 21.08 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973393025
Mpn: 803-03-333by FOX
—$18.08
9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 8 Frame Mount Width 26.92 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973390932
Mpn: 803-03-287by FOX
—$18.08
9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 8 Frame Mount Width 28.8 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973390963
Mpn: 803-03-290by FOX
—$18.08
9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 8 Frame Mount Width 27.43 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973390949
Mpn: 803-03-288by FOX
—$18.08
9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 8 Frame Mount Width 32.39 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973390994
Mpn: 803-03-293by FOX
—$18.08
9-Piece Alloy Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 8 Frame Mount Width 49.78 FOX 9-Piece Alloy Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973393063
Mpn: 803-03-337by FOX
—$23.48
9-Piece Stainless Steel Mounting Hardware Kit for Fox rear shocks. Item Specifications Bolt Mount Diameter 8 Frame Mount Width 44 FOX 9-Piece Stainless Steel Mounting Hardware Kit Rear Shock Mount Kit UPC: 821973393032
Mpn: 803-03-334by FOX
—$559
The all-new X2 changes everything, including the game. This award-winning, gravity-defying air shock holds nothing back, especially not you. Boasting a laundry list of advanced features, the float X2 is ready to clean house. SPECS: ALL-NEW chassis NEW damper NEW high-flow main piston NEW progressive MCU bottom-out bumper Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks NEW HSR with VVC (Variable Valve Control) Independent firm mode circuit – firmer lockout than previous Float X2 Ultra-low-friction, highly durable damper shaft finish Improved bearing ratio for metric sizes Reduced length reservoir for better fit on more frames Finned inner body for improved structural rigidity and reduced hysteresis NEW lower friction air seal Updated compression ratios, 300psi max FOX FLOAT X2 Factory Rear Shock Rear Shock UPC: 821973384085
Mpn: 979-01-001by FOX
—$20.85
5-Piece Stainless Steel Mounting Hardware The new resin hardware reduces friction by nearly 50% compared to traditional mounting hardware O-rings and the flanged bushing design blocks out dirt and mud Item Specifications Bolt Mount Diameter 8 Frame Mount Width 25.1 FOX 5-Piece Stainless Steel Rear Shock Mount Kit UPC: 821973371146
Mpn: 803-03-204by FOX
—$130
SLS springs are a lighter weight steel spring than the standard Fox spring. They are lighter than titanium springs at more affordable prices. The 35 mm/1.385" Internal diameter also fits DVO, MRP and X-Fusion shocks. Spring markings: 400 lbs x 2.9" Internal Diameter: 35 mm/1.385" Item Specifications Material Steel Spring Weight 400 Stroke (ins) 2.9 FOX SLS Coil Spring Rear Shock Spring UPC: 611056173534
Mpn: 033-22-032by FOX
—$1,149
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. Updated Crown Design saves up to 20 grams, and offers significant structural improvments Genuine Kashima Coating on upper tubes Low friction seals for improved performance Lower Leg Bleeders and Bypass Channels Floating axles for perfect alignment Item Specifications Axle to Crown Length 561 Brake Type Post Mount 180 Color Shiny Black Crown Race 40 Defined Color Black External Adjustments High Speed Compression Damping External Adjustments Low Speed Compression Damping External Adjustments Rebound Damping Front Axle 15mm Thru x 110mm Lockout Switch None Maximum Tire Width 72 Negative Spring Air Offset 44 Positive Spring Air S.H.I.S. Stem Clamp Diameter 28.6 Stanchion Diameter 36 Steerer Tube Length (mm) 264 Steerer Type Tapered Travel (mm) 150 Wheel Size 29" FOX 36 Factory Suspension Fork Suspension Fork UPC: 821973469126
Mpn: 910-21-182by FOX
—$339
2025 Fox Transfer Rises Again Fox took their learnings over more than a decade of engineering dropper posts to make the new Transfer smoother, more robust, more tunable and more serviceable than ever before. The transfer rises again with a full redesign, making it more durable than ever. With easier actuation, enhanced serviceability and greater tunability, the 2025 Transfer has an overall edge over the competition. Now travel adjustable in 5mm increments and available with up to 240mm of drop A 62% Reduction in Air Loss over the prior model Transfer. That was the result after fully redesigning internals with an entirely new sealing system. With a focus on enhanced durability, this updated design replaced two dynamic air shaft seals with static seals, lowering overall friction and therefore lowering air loss potential. A 6X Increase in Duty Cycle life came from doubling the oil sealing and adding a wiper. Less oil loss means less maintenance, longer life and reduced overall air loss from air dissolved in the oil. The Air Chamber is Now at the Top of the Post which eliminated dynamic air seals and allowed us to add a Schrader valve for riders wanting to adjust air pressure. Our Schrader valves come with O-ringed metal caps that are proven to not leak Another upgrade for the 2025 Transfer was the move from IGUS bushings to metal-backed Ekonol bushings throughout Transfer’s internals. Ekonol bushings achieve tight tolerances with the lowest possible friction, allowing riders easier actuation (less force to break stiction and lower the post). Transfer now has a 300-hour full-service interval, which riders can do themselves without the need for any special tools or equipment. Travel Adjustable New for 2025, the Transfer offers 5mm increments of tool-free travel adjustment. This is a quick adjustment riders can do without any tools. Most competing droppers offer 10mm increments to account for deformation of the travel adjust components over time. Transfer’s robust travel adjust system is designed to stand up to years of hard use, without deterioration. Tech Specs Diameter Size (mm) 30.9 / 31.6 / 34.9 Metric Sizes (DROP) 95-120mm / 125mm-150mm / 155-180mm / 215-240mm Rounting Internal ONLY Lower Coating anodizing Black Upper Coating Kashima Coat (Factory), Anodized Black (Performance Elite) FOX Transfer Factory Dropper Seat Post Dropper Seatpost UPC: 0821973488028
Mpn: 925-01-331by FOX
—$339
2025 Fox Transfer Rises Again Fox took their learnings over more than a decade of engineering dropper posts to make the new Transfer smoother, more robust, more tunable and more serviceable than ever before. The transfer rises again with a full redesign, making it more durable than ever. With easier actuation, enhanced serviceability and greater tunability, the 2025 Transfer has an overall edge over the competition. Now travel adjustable in 5mm increments and available with up to 240mm of drop A 62% Reduction in Air Loss over the prior model Transfer. That was the result after fully redesigning internals with an entirely new sealing system. With a focus on enhanced durability, this updated design replaced two dynamic air shaft seals with static seals, lowering overall friction and therefore lowering air loss potential. A 6X Increase in Duty Cycle life came from doubling the oil sealing and adding a wiper. Less oil loss means less maintenance, longer life and reduced overall air loss from air dissolved in the oil. The Air Chamber is Now at the Top of the Post which eliminated dynamic air seals and allowed us to add a Schrader valve for riders wanting to adjust air pressure. Our Schrader valves come with O-ringed metal caps that are proven to not leak Another upgrade for the 2025 Transfer was the move from IGUS bushings to metal-backed Ekonol bushings throughout Transfer’s internals. Ekonol bushings achieve tight tolerances with the lowest possible friction, allowing riders easier actuation (less force to break stiction and lower the post). Transfer now has a 300-hour full-service interval, which riders can do themselves without the need for any special tools or equipment. Travel Adjustable New for 2025, the Transfer offers 5mm increments of tool-free travel adjustment. This is a quick adjustment riders can do without any tools. Most competing droppers offer 10mm increments to account for deformation of the travel adjust components over time. Transfer’s robust travel adjust system is designed to stand up to years of hard use, without deterioration. Tech Specs Diameter Size (mm) 30.9 / 31.6 / 34.9 Metric Sizes (DROP) 95-120mm / 125mm-150mm / 155-180mm / 215-240mm Rounting Internal ONLY Lower Coating anodizing Black Upper Coating Kashima Coat (Factory), Anodized Black (Performance Elite) FOX Transfer Factory Dropper Seat Post Dropper Seatpost UPC: 0821973488189
Mpn: 925-01-337by FOX
—$339
2025 Fox Transfer Rises Again Fox took their learnings over more than a decade of engineering dropper posts to make the new Transfer smoother, more robust, more tunable and more serviceable than ever before. The transfer rises again with a full redesign, making it more durable than ever. With easier actuation, enhanced serviceability and greater tunability, the 2025 Transfer has an overall edge over the competition. Now travel adjustable in 5mm increments and available with up to 240mm of drop A 62% Reduction in Air Loss over the prior model Transfer. That was the result after fully redesigning internals with an entirely new sealing system. With a focus on enhanced durability, this updated design replaced two dynamic air shaft seals with static seals, lowering overall friction and therefore lowering air loss potential. A 6X Increase in Duty Cycle life came from doubling the oil sealing and adding a wiper. Less oil loss means less maintenance, longer life and reduced overall air loss from air dissolved in the oil. The Air Chamber is Now at the Top of the Post which eliminated dynamic air seals and allowed us to add a Schrader valve for riders wanting to adjust air pressure. Our Schrader valves come with O-ringed metal caps that are proven to not leak Another upgrade for the 2025 Transfer was the move from IGUS bushings to metal-backed Ekonol bushings throughout Transfer’s internals. Ekonol bushings achieve tight tolerances with the lowest possible friction, allowing riders easier actuation (less force to break stiction and lower the post). Transfer now has a 300-hour full-service interval, which riders can do themselves without the need for any special tools or equipment. Travel Adjustable New for 2025, the Transfer offers 5mm increments of tool-free travel adjustment. This is a quick adjustment riders can do without any tools. Most competing droppers offer 10mm increments to account for deformation of the travel adjust components over time. Transfer’s robust travel adjust system is designed to stand up to years of hard use, without deterioration. Tech Specs Diameter Size (mm) 30.9 / 31.6 / 34.9 Metric Sizes (DROP) 95-120mm / 125mm-150mm / 155-180mm / 215-240mm Rounting Internal ONLY Lower Coating anodizing Black Upper Coating Kashima Coat (Factory), Anodized Black (Performance Elite) FOX Transfer Factory Dropper Seat Post Dropper Seatpost UPC: 0821973488349
Mpn: 925-01-339by FOX
—$339
2025 Fox Transfer Rises Again Fox took their learnings over more than a decade of engineering dropper posts to make the new Transfer smoother, more robust, more tunable and more serviceable than ever before. The transfer rises again with a full redesign, making it more durable than ever. With easier actuation, enhanced serviceability and greater tunability, the 2025 Transfer has an overall edge over the competition. Now travel adjustable in 5mm increments and available with up to 240mm of drop A 62% Reduction in Air Loss over the prior model Transfer. That was the result after fully redesigning internals with an entirely new sealing system. With a focus on enhanced durability, this updated design replaced two dynamic air shaft seals with static seals, lowering overall friction and therefore lowering air loss potential. A 6X Increase in Duty Cycle life came from doubling the oil sealing and adding a wiper. Less oil loss means less maintenance, longer life and reduced overall air loss from air dissolved in the oil. The Air Chamber is Now at the Top of the Post which eliminated dynamic air seals and allowed us to add a Schrader valve for riders wanting to adjust air pressure. Our Schrader valves come with O-ringed metal caps that are proven to not leak Another upgrade for the 2025 Transfer was the move from IGUS bushings to metal-backed Ekonol bushings throughout Transfer’s internals. Ekonol bushings achieve tight tolerances with the lowest possible friction, allowing riders easier actuation (less force to break stiction and lower the post). Transfer now has a 300-hour full-service interval, which riders can do themselves without the need for any special tools or equipment. Travel Adjustable New for 2025, the Transfer offers 5mm increments of tool-free travel adjustment. This is a quick adjustment riders can do without any tools. Most competing droppers offer 10mm increments to account for deformation of the travel adjust components over time. Transfer’s robust travel adjust system is designed to stand up to years of hard use, without deterioration. Tech Specs Diameter Size (mm) 30.9 / 31.6 / 34.9 Metric Sizes (DROP) 95-120mm / 125mm-150mm / 155-180mm / 215-240mm Rounting Internal ONLY Lower Coating anodizing Black Upper Coating Kashima Coat (Factory), Anodized Black (Performance Elite) FOX Transfer Factory Dropper Seat Post Dropper Seatpost UPC: 0821973489230
Mpn: 925-01-345by FOX
—$339
2025 Fox Transfer Rises Again Fox took their learnings over more than a decade of engineering dropper posts to make the new Transfer smoother, more robust, more tunable and more serviceable than ever before. The transfer rises again with a full redesign, making it more durable than ever. With easier actuation, enhanced serviceability and greater tunability, the 2025 Transfer has an overall edge over the competition. Now travel adjustable in 5mm increments and available with up to 240mm of drop A 62% Reduction in Air Loss over the prior model Transfer. That was the result after fully redesigning internals with an entirely new sealing system. With a focus on enhanced durability, this updated design replaced two dynamic air shaft seals with static seals, lowering overall friction and therefore lowering air loss potential. A 6X Increase in Duty Cycle life came from doubling the oil sealing and adding a wiper. Less oil loss means less maintenance, longer life and reduced overall air loss from air dissolved in the oil. The Air Chamber is Now at the Top of the Post which eliminated dynamic air seals and allowed us to add a Schrader valve for riders wanting to adjust air pressure. Our Schrader valves come with O-ringed metal caps that are proven to not leak Another upgrade for the 2025 Transfer was the move from IGUS bushings to metal-backed Ekonol bushings throughout Transfer’s internals. Ekonol bushings achieve tight tolerances with the lowest possible friction, allowing riders easier actuation (less force to break stiction and lower the post). Transfer now has a 300-hour full-service interval, which riders can do themselves without the need for any special tools or equipment. Travel Adjustable New for 2025, the Transfer offers 5mm increments of tool-free travel adjustment. This is a quick adjustment riders can do without any tools. Most competing droppers offer 10mm increments to account for deformation of the travel adjust components over time. Transfer’s robust travel adjust system is designed to stand up to years of hard use, without deterioration. Tech Specs Diameter Size (mm) 30.9 / 31.6 / 34.9 Metric Sizes (DROP) 95-120mm / 125mm-150mm / 155-180mm / 215-240mm Rounting Internal ONLY Lower Coating anodizing Black Upper Coating Kashima Coat (Factory), Anodized Black (Performance Elite) FOX Transfer Factory Dropper Seat Post Dropper Seatpost UPC: 0821973488318
Mpn: 925-01-341by FOX
© 2024 Worldwide Cyclery