—$16.96
Master link pliers allows derailleur chains that use a master link to be installed and removed by hand. Blue, vinyl coated handle offers comfort and grip Works with all 5-11 speed derailleur chains that use a master link Item Specifications Type Master Link keyword search MLP1.2 keyword search park consumer tool Drivetrain Speeds 5-12 Park Tool MLP-1.2 Chain Tool UPC: 763477004567
Mpn: MLP-1.2by Park Tool
—$11.49
For removing and installing cassette lockrings on Shimano-compatible freehub bodies and some Centerlock disc brake systems. Fits 12-spline cassette lockrings from Shimano, SRAM, SunRace, SunTour, Chris King and others Item Specifications keyword search Replaces FR-5 Park Tool Lockring Tool Freehub & Cog Tool UPC: 763477003485
Mpn: FR-5.2by Park Tool
—$20.95
Makes hydraulic disc brake maintenance and repair faster and easier. Wedge-shaped tool slides into a hydraulic disc brake caliper to pre-set the piston when replacing or aligning pads Dual density handle provides a positive grip Park Tool PP-1.2 Hydraulic Piston Press Brake Tool UPC: 763477004826
Mpn: PP-1.2by Park Tool
—$43.95
Designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing. Built in crimper for cable end caps and forming hole for reforming housing ends and housing ferrules Precision ground cutting jaws for a clean cut on every cable Wire latch holds handles together when not in use Cold forged, heat treated steel handles for strength Park Tool CN-10 Professional Cable and Housing Cutter Cable Cutter UPC: 763477002044
Mpn: CN-10by Park Tool
—$14.95
For removing and installing cassette lockrings on Shimano-compatible freehub bodies and some Centerlock disc brake systems. FR-5.2GT incorporates a specially-sized guide pin that stabilizes the tool when removing cassette lockrings from 12mm thru-axle hubs Fits 12-spline cassette lockrings from Shimano, SRAM, SunRace, SunTour, Chris King and others Park Tool Lockring Tool Freehub & Cog Tool UPC: 763477003393
Mpn: FR-5.2GTby Park Tool
—$35.95
Sprocket remover/chain whip made from heat treated steel and a molded handle for comfort.15" long for extra leverage and vinyl coated handle for comfort Park Tool Chain Whip Chain Whip & Cog Holder UPC: 763477007049
Mpn: SR-12.2by Park Tool
—$12.95
Quickly and accurately determine the wear and stretch of any chain. Updated to be longer, more accurate and features permanent measurement markings Accurately indicates when a chain reaches 0.5% and 0.75%, the points at which most chain manufacturers suggest replacement Park Tool CC-3 Chain Wear Indicator Wear Indicator UPC: 763477001344
Mpn: CC-3.2by Park Tool
—$41.95
The CT-3.3 is a professional shop-quality tool for removal and installation of bicycle chain rivets for chain sizing and replacement. Compatible with virtually all single-speed and multi-speed chains* including SRAM Flattop and SRAM T-Type. The CT-3.3 features a floating locating shelf for compatibility with any width of chain. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin for years of dependable use. Compatible with single-speed bicycle chains including 1/8", 3/16" and half-link Compatible with all 5-speed to 12-speed bicycle chains* including SRAM T-Type, SRAM Flattop, and Shimano XTR 12-speed *The CT-3.3 will install and remove, but not peen, Campagnolo 11, 12 and 13-speed chain rivets Item Specifications Drivetrain Speeds 13 Park Tool CT-3.3 Chain Tool Chain Tool UPC: 763477002372
Mpn: CT-3.3by Park Tool
—$17.38
The Park Tool CC-4 Chain Checker is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of determining when chain replacement is necessary. The tool works on any 5 to 12-speed derailleur chain (including SRAM T-Type, SRAM Flattop, and Shimano XTR 12-speed chains) and is designed to accurately indicate when a chain reaches 0.5% and 0.75% wear, the points at which most chain manufacturers suggest replacement. 5-to-10-speed chains: replace chain at or just before 0.75% 11-to-12-speed chains: replace at or just before 0.5% Check with manufacturer for specific replacement instructions Park Tool CC-4 Chain Wear Indicator Wear Indicator UPC: 763477001351
Mpn: CC-4by Park Tool
—$28.95
This small chain tool goes anywhere and actually performs like a shop quality tool. The fine thread, special V-shaped handle, and strong replaceable pin make chain removal and installation a breeze Works on all chains including 10-Speed Perfect take-along chain tool at only 77 grams Handy "loosening shelf" to remedy stiff links after reassembly Nominal Dimensions: 60mm tall, 55mm wide and 15mm thick Park Tool CT-5 Mini Chain Tool Chain Tool UPC: 763477002242
Mpn: CT-5by Park Tool
—$56.95
Tools designed by Park Tool to service Bottom Brackets. Removes and installs the bearings and bearing units used in BB86, BB90, BB92, Shimano, SRAM, GXP, Race Face and other press fit bottom bracket systems using a 24mm spindle Includes: bearing removal tool and two installation bushings (#669) Park Tool BBT PressFit Bottom Bracket Tool UPC: 763477000644
Mpn: BBT-90.3by Park Tool
—$20.95
Specially designed, and precisely manufactured to gently adjust bent or damaged brake rotors. Features two different slot depths laser cut from high quality steel Centered handle is vinyl dipped for comfort Park Tool Rotor Truing Fork Brake Tool UPC: 763477002877
Mpn: DT-2by Park Tool
—$21.95
The DH-1 Dummy Hub slides into the rear dropouts of a bicycle frame and replaces the rear wheel, keeping the chain in place while the wheel is removed for cleaning, service, or transportation. The unique design allows the bicycle to be pedaled and the derailleur to be shifted, making the DH-1 an essential tool for chain cleaning or diagnosis of drivetrain issues. Compatible with all multi-speed and 1/8" chain Compatible with quick-release and 12 mm thru axle frames Item Specifications keyword search chain keeper Park Tool DH-1 Dummy Hub Other Hub Tool UPC: 763477002709
Mpn: DH-1by Park Tool
—$33.95
Tools designed by Park Tool to service Bottom Brackets. For removing and installing Shimano, Race Face, FSA, Truvativ, Sram, Campagnolo and similar bottom bracket cups with 16 external notches Also works with Shimano to remove and install 8-point Shimano Hollowtech II crank arm adjusting caps Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477000491
Mpn: BBT-9by Park Tool
—$23.95
Tools designed by Park Tool to service Bottom Brackets. Used to remove and install all Shimano Octalink and ISIS Drive Splined 20-tooth bottom bracket cups 3/8" drive with 1" wrench flats Park Tool BBT Series Bottom Bracket Tool UPC: 763477000385
Mpn: BBT-22by Park Tool
—$25.95
High quality tools ensure that headsets are properly serviced. Park Tool Threadless Nut Setters Headset Tool UPC: 763477008008
Mpn: TNS-1by Park Tool
—$67.95
Take the guesswork out of installing cables, wires and housing inside the frame. The Park Tool IR-1 speeds the internal frame routing of electric wires, shift cable/housing, brake cable/housing, and hydraulic tubing on carbon fiber, Ti, and aluminum frames. Opposite polarity magnets on cables seek and attach inside frame tubes, making it easy to route through frame entrances and exits Kit includes four plastic coated 250cm cables with attached magnets and unique fittings plus an external guide magnet to speed operation Includes a dedicated E-tube Di2 cable connector that easily pulls through a 6mm frame hole Works with any size frame including tandems Park Tool IR-1 Cable Routing Kit Cable Puller UPC: 763477003874
Mpn: IR-1.2by Park Tool
—$17.02
Self-Extracting crank cap tool Removes and installs 8-point adjusting caps on Shimano Hollowtech II crank/bottom bracket systems Built in hook to lift safety plate on left side Shimano Hollowtech II crank arms Steel investment cast body Optional use with 8mm hex wrench for seized caps Removes and installs self-extracting one-key release caps on Sram and Race Face cranks with 16mm hex hole Investment cast steel construction with 8mm hex key for better leverage Park Tool Crank Cap Tools Crank Arm Tool UPC: 763477000460
Mpn: BBT-10.2by Park Tool
—$16.95
Park Tool crank pullers can easily remove even the tightest cranks. Made for the 22 x 1mm threading in the common cranks Rotating tips pressed into each end of the tool (11.3mm and 16.3mm) to remove both square and splined crank arms Park Tool Crank Puller Crank Arm Tool UPC: 763477001474
Mpn: CWP-7by Park Tool
—$13.15
For removing and installing cassette lockrings on Shimano-compatible freehub bodies and some Centerlock disc brake systems. Fits 12-spline cassette lockrings from Shimano, SRAM, SunRace, SunTour, Chris King and others FR-5.2G uses a 5mm guide pin designed to fit perfectly inside a Quick-release axle Park Tool Lockring Tool Freehub & Cog Tool UPC: 763477003348
Mpn: FR-5.2Gby Park Tool
—$49.95
The CP-1.2 is a great alternative to a traditional chain whip for removal and installation of bicycle cassettes. Utilizing a simple-yet-effective design that allows for one-handed operation, the CP-1.2 quickly grips cogs with 9 to 24 teeth to securely hold the cassette in place. The long jaws and handle provide ample leverage for the most stubborn lockrings. Forged steel construction with a spring loaded return and comfortable dual density grips for a lifetime of use. Compatible with all 7-speed to 12-speed cassettes including SRAM eTap AXS and Shimano XTR 12-speed Compatible with single-speed cassettes with a 3/32" cog Length: 35 cm (13.7") Park Tool CP-1.2 Cassette Pliers Chain Whip & Cog Holder UPC: 763477002099
Mpn: CP-1.2by Park Tool
—$56.95
The SKT-6 is a shop quality set of six flat-faced sockets designed for use with common suspension fork fittings. Ideal for use with Park Tool Torque Wrenches, the 3/8" drive sockets are forged from tough chrome vanadium steel and chrome plated for lasting durability. Shop quality chrome plated 3/8" sockets for suspension and tuning work Set includes: 24, 26, 27, 28, 30 and 32mm 27mm socket is tapered for service work on Suntour suspension forks Park Tool Flat Faced Socket Set Suspension Tool UPC: 763477006509
Mpn: SKT-6by Park Tool
—$22.95
Park Tool bottom bracket tools for installation and removal of 16 notch bottom brackets. Made from high precision, hardened chromoly steel the BBT-19.2 can be turned with a 3/8" drive wrench, 1" wrench or Park Tool FRW-1 Freewheel Remover Wrench For installing & Removing Shimano, Truvativ, Race Face, FSA, Sram & Campagnolo 16-notch external bearing 44mm OD bottom bracket cups Fits most thru-axle Centerlock lock rings Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477000521
Mpn: BBT-19.2by Park Tool
—$50.95
BBT PressFit Bottom Bracket Tool Set Designed and built to install and remove of the bearings used in bearings used in BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems BBT-30.4 features a bushing set used in conjunction with a head cup press to quickly and precisely press the BB30 and PF30 bearings in the bottom bracket shell The included BB30 bearing remover works from inside the shell to easily push out bearing Park Tool BBT PressFit Bottom Bracket Tool UPC: 763477000958
Mpn: BBT-30.4by Park Tool
—$28.95
Quickly and accurately determine the wear and stretch of any chain. Compatible with all bicycle chains For modern 9 and 10 speed chains, replace chain at or just before the 0.75% readings For 11 speed chains, replace at or just before the 0.5% reading Insert the Chain Checker's pins into two links, press the swing arm gauge tight, and check the gauge window for an accurate reading Park Tool CC-2 Chain Checker Wear Indicator UPC: 763477001313
Mpn: CC-2by Park Tool
—$45.95
This shop quality chain whip gives you incredible leverage without worry of slippage, and the head is uniquely shaped to allow quick and accurate access to any cassette or freewheel. Works on 5-speed to 12-speed mountain and road bike cassettes and freewheel Hardened bolts hold securely and make chain replacement easy Heavy duty, heat treated head Round vinyl coated handle The SR-2.3 is approximately 15" long (38cm) Park Tool SR-2.3 Sprocket Remover/Chain Whip Freehub & Cog Tool UPC: 763477007056
Mpn: SR-2.3by Park Tool
—$26.95
Park Tool bottom bracket tools for installation and removal of 16 notch bottom brackets. Fits 16-notch tool fittings with a major diameter (outside of notches) of 44 45 mm and a minor diameter (inside of notches) of 42.7 mm, including: Shimano BB80, BB5700, XT BB70, BB51, and previous external bearing threaded bottom bracket cups Threaded bottom bracket cups from Campagnolo , Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels, Fulcrum, and others Center lock disc brake rotor lockrings Bafang BBSH, BBS02 mid-drive motor lockrings Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477001658
Mpn: BBT-69.4by Park Tool
—$19.95
The PW-5 is perfect for the home workshop or event tool box. 15mm pedal wrench, made from heat-treated spring steel, is built to last Vinyl dipped handle provides a comfortable grip Length: 11-1/2" (29 cm) Item Specifications Type P Handle Tip Size 15.0mm Park Tool PW-5 Home Mechanic Pedal Wrench Pedal Wrench UPC: 763477005632
Mpn: PW-5by Park Tool
—$19.95
Park Tool crank pullers can easily remove even the tightest cranks. Specifically designed to remove crank arms from splined Shimano Octalink and ISIS Drive bottom bracket spindles that do not use a "self extracting" system 22mm x 1mm fine thread provides leverage needed to remove tight crank arms Strong rotating tip system ensures smooth operation and long life Park Tool CCP-44 Crank Puller Crank Arm Tool UPC: 763477001276
Mpn: CCP-44by Park Tool
—$8.78
Park Chain Tool Replacement Pins Park Tool Chain Tool Replacement Pins Chain Tool Replacement Pin UPC: 763477002228
Mpn: CTP-Cby Park Tool
—$92.95
High quality tools ensure that headsets are properly serviced.Designed to install all sizes of head cups and one-piece bottom bracket cups Park Tool Headset Tools Headset Tool UPC: 763477004321
Mpn: HHP-3by Park Tool
—$19.99
Park Tool crank pullers can easily remove even the tightest cranks. Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles Also fits "Power Spline" cranks from SRAM using the 8mm thread bolt Strong rotating tip system ensures smooth operation and long life Park Tool CCP-22 Crank Puller Crank Arm Tool UPC: 763477001245
Mpn: CCP-22by Park Tool
—$45.95
For removing and installing cassette lockrings on Shimano-compatible freehub bodies and some Centerlock disc brake systems. Has a specially modified head that allows removal and installation of some 12-spline cassette lockrings without removing the hub's quick-release skewer nut Removable, threaded handle makes replacement of a worn or damaged head quick and easy Fits 12-spline cassette lockrings from Shimano, SRAM, SunRace, SunTour, Chris King and others Park Tool Lockring Tool Freehub & Cog Tool UPC: 763477003409
Mpn: FR-5.2Hby Park Tool
—$52.95
High quality tools ensure that headsets are properly serviced. Park Tool Threadless Nut Setters Headset Tool UPC: 763477008039
Mpn: TNS-4by Park Tool
—$41.95
High quality tools ensure that headsets are properly serviced. The RT-2 is specially designed for removing 1-1/4" and 1.5" head cups RT-2's flared end fits through the head tube and snaps behind the cup, allowing the cup to be removed with a tap of a hammer Durable, heat treated, alloy steel with nickel finish for long life Heat-treated CroMoly Park Tool Headset Tools Headset Tool UPC: 763477006011
Mpn: RT-2by Park Tool
—$38.95
High quality tools ensure that headsets are properly serviced. Fits 1", 1-1/8", 1-1/4" Heat treated CroMo Park Tool Headset Tools Headset Tool UPC: 763477006004
Mpn: RT-1by Park Tool
—$46.95
Park Other Hub Tools Park Tool Axle/Spindle Vise Inserts Other Hub Tool UPC: 763477000125
Mpn: AV-5by Park Tool
—$23.95
Chainring lockring tools from Park Tool. Machined flat face for optimal lockring engagement 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque For lockrings with 41mm outside diameter with 16 notches Park Tool LRT Chainring Lockring Tool Chainring Tool UPC: 763477006905
Mpn: LRT-4by Park Tool
—$27.95
Tools designed by Park Tool to service Bottom Brackets. Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477000583
Mpn: BBT-29by Park Tool
—$13.64
Tools designed by Park Tool to service Bottom Brackets. Fits adjusting cup on many adjustable type bottom brackets Round pin ends have a diameter of 2.9mm Park Tool SPA Series Bottom Bracket Tool UPC: 763477006738
Mpn: SPA-1by Park Tool
—$229.95
High quality tools ensure that headsets are properly serviced.Fits all sizes Park Tool Headset Tools Headset Tool UPC: 763477004314
Mpn: HHP-2by Park Tool
—$124.95
Park Tool high quality tools ensure that headsets are properly serviced. Oversized Crown Race Setting System uses two different insert rings to install bearing races on 1.5" and 1-1/4" forks The bearing surface is spared a direct hit by using an aluminum insert Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately Included extension allows work on fork steering tubes up to 425mm SHIS terminology: The CRS-15 services crown races in SHIS 33 and 40 Park Tool Headset Tools Headset Tool UPC: 763477002174
Mpn: CRS-15.2by Park Tool
—$33.95
The Park Tool HCW-16.3 combines two tools essential for common bicycle maintenance and repair-a pedal wrench and a chain whip for removing rear sprockets-without sacrificing functionality. With its long handle and E-nickel-plated steel construction, the HCW-16.3 is a strong, durable tool that is built to last, equally at home in the garage or in a professional mechanic's traveling toolbox. Pedal wrench: compatible with any pedal with 15 mm wrench flats Chain whip: compatible with all 7-speed to 12-speed cassettes, including SRAM AXS 12-speed systems, and compatible with single-speed cassettes with a 3/32" cog Park Tool HCW-16.3 Chain Whip/Pedal Wrench Freehub & Cog Tool UPC: 763477003683
Mpn: HCW-16.3by Park Tool
—$27.95
Tools designed by Park Tool to service Bottom Brackets. Designed for heavy duty use, the distance between the pins is adjustable, allowing use on virtually all hanger cups using pin holes Uses hardened, replaceable pins approximately 2.2mm in diameter Park Tool SPA Series Bottom Bracket Tool UPC: 763477006837
Mpn: SPA-6by Park Tool
—$9.49
Makes chainring bolt set installation and removal easy. Securely holds the slotted nut to prevent spinning when tightening or loosening the bolt Double-ended to fit most slotted-type nuts Park Tool CNW-2 Chainring Nut Wrench Chainring Tool UPC: 763477002068
Mpn: CNW-2by Park Tool
—$11.95
These cone wrenches are designed for the home mechanic or occasional user. Made of thin steel and are nickel plated and heat treated for long use Small tool size to carry along for quick repairs Park Tool Double-Ended Cone Wrench Cone Wrench UPC: 763477002778
Mpn: DCW-3by Park Tool
—$12.79
Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006356
Mpn: SCW-17by Park Tool
—$28.95
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM BSA DUB, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45-47 mm and a minor diameter (inside of notches) of 44 mm, including: SRAM BSA DUB, Race Face Cinch, Rotor BSA30, Zipp Vuma, Hawk Racing BB3086, and more 3/8" drive fitting Park Tool BBT-79.3 Bottom Bracket Tool - 12-Notch Bottom Bracket Tool UPC: 763477001641
Mpn: BBT-79.3by Park Tool
—$15
Tools designed by Park Tool to service Bottom Brackets. For installation & removal of Shimano & ISIS drive splined 20-tooth bottom bracket cups 32mm Wrench flats Park Tool BBT Series Bottom Bracket Tool UPC: 763477000590
Mpn: BBT-32by Park Tool
—$102.95
Shop quality cone wrench for extended use by professional mechanics. Long, vinyl dipped handle for leverage and comfortable use Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006196
Mpn: SCW-SET.3by Park Tool
© 2024 Worldwide Cyclery