• 300 psi max
• Works with all Fox Forks and Rear Shocks, Analog pressure guage.

• Includes Fox Float fluid seal lubricant
• Includes 2 quad rings
• Includes 2 O-rings
• Includes dust wiper
• Includes travel indicator O-ring
• Includes 4 back up rings

• Recommended for X0 hub pawls, Pike and Reverb Service

• Seals punctures up to 1/4" on standard and tubeless tires

• Designed to seal punctures up to 1/4"
• Stable down to -30 degrees Fahrenheit
• Non-hazardous, non-corrosive, non-toxic
• Contains natural latex
• Suitable for use in tubeless tires and standard tubes

• English BSA thread, 68/73mm
• Gutter Seal Technology drastically improves sealing against the elements
• Sealed cartridge bearings
• One oversized spindle to work across every bottom bracket standard
• Significantly lighter than GXP system

• Must-have kits for all mechanics
• Kit includes 2 syringes, fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and DOT5.1 hydraulic fluid

• Fits most grease guns
• Slick Honey is waterproof, highly resistant to washout, and has a working temperature range of -65 F to 250 F
• Rust and corrosion inhibitors prevent seizure in bike parts
• Safe for use with elastomers, microcellular urethane (MCU) elastomers, o-rings, and oil baths
• MSDS info available upon request

• Premium Latex coats the whole casing, from tire bead to tread cap
• Seals punctures up to 1/8", and slices up to 1/2" with the use of Nanites
• Developed to add as little weight to a tire as possible
• Made of eco-friendly biodegradable ingredients

• Combine with Gnar Dog (RS1508) to create Sonar equivalent

• Intended use: hardpack, loose over hard, medium
• Advanced knob design creates extra gripping edges and reinforced side tread for secure cornering
• Dual compound rubber offers low rolling resistance and increased cornering traction
• EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible

• Graduated two ounce injector makes application of sealant simple, with no mess or waste of sealant
• Adapter fits both presta and schrader valves
• Seals punctures up to 1/4" on standard and tubeless tires

• Lightweight nylon composite body
• Offers great performance for a wide range of riders
• Smooth and durable sealed bearing and bushing system
• Chromoly axle that is fully sealed and has a 100% serviceable bearing and bushing system.

• Directional ramped center knobs provide low rolling resistance
• Minion signature channel cut side knobs provide excellent cornering traction
• Intended use: loose, loose over hard, medium, wet

• Minion signature channel cut side knobs provide excellent cornering traction
• Intended use: loose, loose over hard, medium, wet
• Directional ramped center knobs provide low rolling resistance
• 3C Maxx Terra is an intermediate compound that provides additional grip but still retains excellent tread wear and rolling resistance qualities
• EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible
• Wide Trail (WT) casing is optimized for 30-35mm inner width rims

• Lever pivots on a 21mm ball bearing for smooth operation
• Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash.
• Cable Kind Clamp does not damage secured cables and features captive hardware.
• Includes barrel adjuster for on the fly changes
• Includes 22.2mm bar clamp

• Advanced knob design creates extra gripping edges and reinforced side tread for secure cornering
• Intended use: hardpack, loose over hard, medium

• 20wt. Gold Bath Oil may be used with FIT and O/C damper cartridges but should NEVER be used in open bath fork dampers
• Compatible with all 34mm, 36mm, and 40mm FOX Low-Friction wipers
• Only compatible with the latest version of the 32mm FOX Low-Friction wipers (803-00-944). The label indicates specifically that these wipers are compatible with 20wt. Gold

Sram GX Eagle 12 Speed Group w/ Shifter, Derailleur, Chain & SunRace 11-50t Cassette

Have you wanted to upgrade your bike but you can't find or don't want to get a XD Driver for your rear hub? Well your problem is now solved! With this 11-50t SunRace cassette, you can have the same great range of a 12-speed and still use your 11 speed shimano freehub, no need to buy a XD driver! This kit has 4 parts to make it simple to upgrade your drivetrain to the new and popular 1x12 system. Whether you are dropping your front derailleur for the first time or upgrading your exsisting 1x system, this new group will give you a huge gear range while keeping the simplicity of the 1x system. It shifts crisp and looks as good as it works.

SunRace MZ90 12-speed 11-50T Cassette: Black

Brand new 12 speed cassette in Black! MZ90 12-speed wide ratio cassette featuring alloy spiders, lockring and spacer.

• 7 Sprockets on 2 spider carriers
• Tooth profiles provide better up and down shifting and improve chain retention
• Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed , Shimano Dynasys 11 Speed Mountain
• Cassette Cogs: 11-13-15-17-19-21-24-28-32-36-42-50
• Drivetrain Speeds: 12
• Range: 11-50
• Weight: 586g

SRAM GX Eagle Hollow Pin 12-Speed Chain 126 links With PowerLock, Silver/Gray

The chain is the heart of the Eagle 1x12 drive train, ensuring quiet operation, long life and precise shifting. Same link geometry as XX1 Eagle, with solid pins and a more modest finish treatment.

• Not for use with front derailleur drive trains
• Recessed chain rivet contact area allows ultr-high joining strength with zero pin protrusion
• PowerLock non-reusable connecting link is included
• Weight: 260g

SRAM GX Eagle Rear Derailleur 12 Speed Black

This new GX derailleur not only answers the Eagle™ drivetrain’s need for greater capacity, but it’s also the next evolution of our proven, 1x-specific X-HORIZON™ design. The larger, 14-tooth X-SYNC™ lower pulley allows 10- to 50-tooth cassette, and also adds to Eagle’s overall smooth-pedaling feel. Our new, Type-3 ROLLER BEARING CLUTCH™ features a smoother torque curve for a quieter, more consistent operation and feel. CAGE LOCK™ has been moved back and out of the way, protecting it from trail debris. And a redesigned, robust mounting system further improves the Eagle™ derailleur’s performance and overall durability.

Includes SRAM Eagle Rear Derailleur Chain Gap Adjustment Gauge!

• 12 speed
• Color: Black
• X-Actuation ratio specifically engineered for SRAM's 1x12-speed Eagle drivetrain
• X-Horizon design aligns the parallelogram to a horizontal axis providing constant chain gap across all 11 gears resulting in fast, precise shifts with reduced shifter force
• Type-3: features a smoother torque curve for a quieter, more consistent operation and feel, with an incorporated CageLock feature for faster wheel changes and chain service
• Large 14-tooth X-Sync lower pulley allows for the 10 to 50 tooth cassette capacity in this compact design
• Material: Aluminum, Steel pulley
• Stainless hardware
• Weight: 290g

SRAM GX Eagle Trigger Shifter 12 Speed Rear with Discrete Clamp Black

High performance, moderate priced shifters for Eagle 1x12 drive trains.

• Specific to SRAM's 1x12-speed Eagle mountain drivetrain
• X-actuation for super-precise shifting across wide-range gearing along with up to 5 gears per shift throw
• New mechanism creates a smoother and more precise shifting system with exceptional reliability
• Aluminum trigger lever and updated internal mechanism provide crisp feel and precise shifts
• Not integrated with brake lever to allow use with various brake options, although compatible with MatchMaker-X clamps for combined brake and/or fork controls
• Includes 2200mm cable & discrete handlebar clamp
• Weight: 122g

• Fits S4, monoblock calipers, Guide Ultimate (B1), Guide RSC (B1), Guide RS (B1), Guide R (B1), Guide T (A1), Level Ultimate, Level TLM, and G2
• Bleeding Edge technology makes bleeding brakes quick and simple. An updated fluid path and bleed porting make it easier to push fluid through the caliper. A dedicated bleed adapter plugs into the bleed port and seals the system to minimize air contamination and fluid loss
• Works with Avid/SRAM Pro Bleed Kits

• 20wt. Gold Bath Oil may be used with FIT and O/C damper cartridges but should NEVER be used in open bath fork dampers
• Compatible with all 34mm, 36mm, and 40mm FOX Low-Friction wipers
• Only compatible with the latest version of the 32mm FOX Low-Friction wipers (803-00-944). The label indicates specifically that these wipers are compatible with 20wt. Gold

• Directional, ramped knob design - front or rear
• Intended use: loose, loose over hard, medium, wet
• Lightweight, single-ply casing
• Wide trail (WT) casing is optimized for 35mm inner width rims

• Blue, vinyl coated handle offers comfort and grip
• Works with all 5-11 speed derailleur chains that use a master link

• Can be used on all wheel sizes
• Protects fork stanchions, seals, and bridge from debris, reducing the need for cleaning and servicing
• Uses Velcro straps to attach to the bridge and stanchions, making fitting and removal a breeze
• Compatible with all forward and double bridge fork designs
• Easy to clean, flexible and opens flat to simply wipe it clean
• Weight: 30g / 1oz
• Material: Customized Polypropylene

• All-new syringe and hose fittings for improved bleed quality
• Use for bleeding all RockShox hydraulic remotes including Reverb and X-Loc
• Reverb fluid is used in all RockShox hydraulic remote systems
• Includes 2 syringes/fittings, Reverb hydraulic fluid, 120ml bottle