—$97.95
World famous Park Tool quality wrapped up in a great set of metric combination wrenches. The MW-SET includes 6mm to 15mm 12-point box/open end wrenches Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip Item Specifications Type Double Ended Tip Size 6,7,8,9,10,11,12,13,14,15, 16, 17 Park Tool Metric Wrench Set Combination Wrench UPC: 763477004451
Mpn: MW-SET.2by Park Tool
—$31.95
Tools designed by Park Tool to service Bottom Brackets. Features a proven Y-head design for leverage 36mm box-end and bottom bracket pin spanner Center to center measurment between pins is 29mm and pin diameter is nominally 2.3mm Park Tool HCW Series Bottom Bracket Tool UPC: 763477004031
Mpn: HCW-4by Park Tool
—$11.49
The small and handy RR-12.2 Tape Measure features a tough composite housing with an integrated belt clip and both metric and SAE readings up to 350 centimeters or 12 feet. Measurement can be locked in place using the thumb lock or the handy quick-stop button. The RR-12.2 features a new body design with a handy-quick stop button on the bottom, allowing the user to temporarily lock the tape into place with their index finger Metric and SAE readings up to 350 centimeters or 12 feet Markings: 1 mm | 1/32" (up to 6") | 1/16" (over 6") RR-12.2 features a new body design with a handy-quick stop button on the bottom, allowing the user to temporarily lock the tape into place with their index finger Maximum length: 350 cm | 12 ft. Markings: 1 mm | 1/32" (up to 6") | 1/16" (over 6") Park Tool RR-12.2 Tape Measure Measuring Tool UPC: 763477009227
Mpn: RR-12.2by Park Tool
—$4.99
Replacement pins for Park Chain tools. Fits CT-2, CT-3, CT-5 and CT-7, Sold as Each. Durable and high quality Park Tool Chain Tool Replacement Pins Chain Tool Replacement Pin UPC: 763477002204
Mpn: CTPby Park Tool
—$12.89
Park Tool hex tools are made from high torque industrial steel and through hardened for long life. Item Specifications Type L Wrench Tip Size 12.0mm Park Tool Hex Wrenches Hex Wrench UPC: 763477004369
Mpn: HR-12by Park Tool
—$13.99
Replacement Parts for Park Tool Clamps. Sold as a pair Fits newer double cable clamps 100-3D, 100-5D & 100-25D Parts not listed below can be drop shipped from Park, please call QBP and ask for extension 1205 for more information Park Tool Clamp Parts Repair Stand Replacement Part UPC: 763477015303
Mpn: 1960by Park Tool
—$15.95
Professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit. 3mm Sliding T-Handle Hex Wrench Carefully selected combination of Chrome Vanadium and S-2 tool steels Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless Machined, chamfered tips allow easier insertion into hex fittings Integrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy Sliding T-handle creates increased leverage and multiple access positions Item Specifications Ball End No Set or Individual Individual Style T-Handle Tip Size 3mm Hex Park Tool THH Sliding Hex Wrench Hex Wrench UPC: 763477009425
Mpn: THH-3by Park Tool
—$27.95
Forged and precisely machined, the high leverage LP-7 Utility Pliers include an integrated cutting blade and soft touch grips. Park Tool LP-7 Utility Pliers Plier UPC: 763477003799
Mpn: LP-7by Park Tool
—$11.95
Tools designed by Park Tool to service Bottom Brackets. Uses a 1" hex shape Fits the splined 12-tooth Campagnolo bottom bracket cups found on the square type spindle systems (Record, Chorus, Centaur and Athena) Removes and installs Campagnolo cassette lockrings including 11 speed Park Tool BBT Series Bottom Bracket Tool UPC: 763477003515
Mpn: BBT-5/FR-11by Park Tool
—$134.98
Park Repair Stand Accessories Fits older PRS-2/3/4 (including OS models); also fits PRS-4W Cam-actuated adjustment system for quick entry, adjustment and exit Narrow clamping jaws 2.7" (7cm) designed to clamp securely yet fit into tight areas or on short seat posts Fully adjustable clamping pressure prevents damage to thin-walled tubes Park Tool Clamps Repair Stand Accessory UPC: 763477012043
Mpn: 100-3Dby Park Tool
—$579.95
The Park Tool TS-4.2 Professional Wheel Truing Stand is designed to fit a wide range of hub, wheel and tire combinations with room to spare, utilizing a wider base structure and larger calipers. More accurate and easier to calibrate, the versatile TS-4.2 is solidly built to accommodate and self-center nearly any diameter wheel 16" to 29" and any tire width up to 5"+. Both uprights move simultaneously to always keep wheel centered in the stand Accommodates tire widths up to 5"+ with or without brake rotor mounted Speed knob to quickly change axle widths Accommodates hub widths from 75mm to over 250mm Precise operation and adjustability Precise accuracy, operation and adjustability Built in thru-axle adaptors Chrome plated and powder coated heavy gauge steel construction Removable, replaceable nylon caliper tips to protect painted/anodized rims Park Tool TS-4.2 Professional Wheel Truing Stand Truing Stand UPC: 763477008268
Mpn: TS-4.2by Park Tool
—$28.95
WTK-2 Essential Tool Kit Includes 2 TL-1.2 Tire Levers, AWS-9.2 Fold up Hex Set, 2 TB-2 Tire Boots and GP-2 Patch Kit Packaged in convenient nylon carrying case Park Tool WTK-2 Tool Kit UPC: 763477009210
Mpn: WTK-2by Park Tool
—$12.49
Park Tool offers a wide variety of high quality Torx Wrenches for the home or shop mechanic. Made from through-hardened, high torque industrial steel for long life and precision fit Offset P-handle made from durable nylon and ergonomically designed for comfortable use Item Specifications Type P Handle Tip Size T10 Park Tool Torx Wrenches Torx Wrench UPC: 763477010049
Mpn: PH-T10by Park Tool
—$10.49
Park Tool DW-2 Clutch Wrench. DW-2 is a small, thin wrench with 5.5mm and 3mm openings designed to fit the rear derailleur clutch tension adjuster on Shimano XT, SLX, Deore, Saint and Zee rear Shadow Plus (+) derailleurs and all previous Shadow Plus models.5.5mm and 3mm openings Park Tool DW-2 Clutch Wrench Other Tool UPC: 763477002945
Mpn: DW-2by Park Tool
—$445.95
Engineered and built to accurately face front or rear disc brake mounts to be precisely aligned to rotor. Faces any IS Mount, Post Mount or new Shimano Flat Mount, including low clearance, chainstay mounts Adjustable telescoping axle adapters allow use with any configuration of open or thru axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles) Includes two different facing cutters--one for IS mounts and one for Post and Flat Mounts Park Tool Disc Mount Facer Brake Tool UPC: 763477002969
Mpn: DT-5.2by Park Tool
—$99.95
High quality tools ensure that headsets are properly serviced. Includes: one universal setting tube, three 1" inserts, and three 1-1/8" inserts Works on forks of 340mm column length or less By using different inserts to ensure proper fit on the race, the bearing surface is spared damage The CRS-1 services in SHIS sizes 26, 27, 30 Park Tool Headset Tools Headset Tool UPC: 763477002181
Mpn: CRS-1by Park Tool
—$59.95
Park Truing Stand parts to get truing stands back into tip-top working condition. Park Tool Truing Stand Parts Truing Stand Part UPC: 763477008343
Mpn: TS-2EXT.3by Park Tool
—$193.95
Park Truing Stands offer accurate wheel truing with high quality construction. Accurate wheel truing at an economical price Constructed from heavy gauge steel to resist flexing, the TS-8 can be used freestanding or bolted to a bench for extra stability Accepts wheels from 16" to 29", with or without the tire mounted Innovative sliding dropout allows quick wheel installation, no matter what the hub width (up to 170mm) Dishing (centering) is performed by simply flipping the wheel in the stand Park Tool TS-8 Truing Stand UPC: 763477008220
Mpn: TS-8by Park Tool
—$14.99
Park Tool offers a variety of high quality spoke wrenches that are built to last. Comfortable, vinyl dipped, two-sided spoke wrench is designed to easily access Mavic fittings, including the Mavic SSC Ksyrium and Crossmax SLR wheels The smaller end fits the 6-spline integrated nipples with 5.5mm OD splines, and 7mm thread size nipple The larger end fits the 6-spline 9mm OD of the threaded eyelets of the "FORE drilled rim adapters" found on rims such as the Mavic XM819, EX823 and Speedcity wheels Will not work on Mavic R-Sys wheels Item Specifications Tip Size Mavic Park Tool Spoke Wrenches Spoke Wrench UPC: 763477007438
Mpn: SW-13by Park Tool
—$14.95
Park Tool offers a variety of high quality spoke wrenches that are built to last. Double ended Spoke wrench for select Mavic wheels Smaller end fits 7-spline nipples with a 6.4mm outside diameter Larger end fits 6-spline FORE rim adapters with a 9mm outside diameter Item Specifications Tip Size Mavic Park Tool Spoke Wrenches Spoke Wrench UPC: 763477007469
Mpn: SW-12by Park Tool
—$204.95
Park Truing Stand parts to get truing stands back into tip-top working condition. Dial indicator bracket and set measures a wheel's lateral and radial run-out to 0.01mm Mounts easily to any TS-2 or TS-2.2 Truing Stand Enables user to set and follow tolerances for each wheel Includes two dials, mounting brackets and specially designed tips Park Tool Dial Indicators Truing Stand Part UPC: 763477008190
Mpn: TS-2DIby Park Tool
—$13.09
Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006264
Mpn: SCW-23by Park Tool
—$59.95
Park Tire Levers are strong and durable. Designed to quickly and easily "seat" stubborn tires Adjusts to various tire widths Chrome plated with vinyl coated handles for comfort Item Specifications Unit of Sale Each Park Tool PTS-1 Tire Seater Tire Lever UPC: 763477005502
Mpn: PTS-1by Park Tool
—$419.95
PRS-22 Repair Stand Constucted from 6063 T6 Lightweight alumium & composites, weighs 12.5lbs Adjustable BB height adjustment from 30"-45" 360 Degree rotation for easy access to all sides of the bike Bottom bracket supports a wide variety of different BB shells Non-Frame clamping, holds securely by bottom bracket and front fork Solid and stable folding tripod design. Works with all axle systems Item Specifications keyword search Quantity Break Park Tool PRS-22 Repair Stands UPC: 763477005250
Mpn: PRS-22.2by Park Tool
—$18.95
Specially designed brushes for cleaning hard to reach areas on most bicycles.Includes two rotating brushes, two sponges and two wicking pads already installed in a composite cartridge, ready to snap into the CM-25 Professional Chain Scrubbe Park Tool Brushes and Cleaning Tools Cleaning Tool UPC: 763477006417
Mpn: RBS-25by Park Tool
—$14.95
Park Tool hex tools are made from high torque industrial steel and through hardened for long life. Item Specifications Type L Wrench,Ball End Tip Size 10.0mm Park Tool Hex Wrenches Hex Wrench UPC: 763477004284
Mpn: HT-10by Park Tool
—$18.95
Park Repair Stand Accessories Durable Nylon tray with slots and dividers is ideal for holding small parts and tools Features deep sides and a variety of slots and holes to securely hold tools Tray uses a shim to fit tubes of 1-1/2" (38mm); Without the shim it will fit tubes 1-5/8" (41mm) Intend for stands with a vertical upright tube Fits all Park Tool Repair Stands except PRS-2 OS, PRS-3 OS, and PRS-4 OS, and PRS-15 Park Tool Stand Accessories Repair Stand Accessory UPC: 763477005403
Mpn: 104by Park Tool
—$4.40
Refill pack for the Park Tool TPT-1 Tubeless Plug Tire Tool and other similar tools. These vulcanized rubber plugs are used to temporarily repair punctures in tubeless bicycle tire systems. Set of 5.NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems Park Tool 2370K Tubeless Tire Plug Refill Pack Tubeless Patch Kit UPC: 763477017369
Mpn: 2370Kby Park Tool
—$164.95
A bench-mounted version of our popular PCS-10.2 Deluxe Home Mechanic Repair Stand. Features our world-famous cam-actuated micro adjust clamp design, which securely holds bicycles in place while allowing quick installation and removal. Cam actuated, micro adjustable clamp allows quick entry and exit and fits 1" to 3" (25mm 76mm) diameter tubes and seat posts of any shape and material Narrow clamping jaws (2.7"/7cm) fit into tight areas or on short seat posts 360 infinite clamp rotation allows bike to placed in optimal position for specific repairs All steel structure for maximum stiffness and durability Super strong glass-filled nylon composite fittings and top tube internals enable smooth rotation and secure positioning Mounts to any flat surface (mounting bolts not included) Distance from the center of the clamp to the center of the mount is approximately 11 3/4 (30cm). Height from bench to center of the clamp axis is approximately 9 7/8 (25cm). Weight Limit: The PCS-12.2 Home Mechanic Bench Mount Repair Stand has an 80 lb. (36kg) weight limit, provided the stand is securely mounted with appropriate fasteners to a solid and secure bench surface. The user is responsible for making sure the workbench and the fasteners are capable of handling this amount of weight. Item Specifications Bike Weight Limit (per bike) 80 Clamp Style Seatpost Stand Style Bench-mount Weight (lb) 7.33 Park Tool PCS-12.2 Bench Mount Repair Stand Repair Stands UPC: 763477007063
Mpn: PCS-12.2by Park Tool
—$8.99
Park Truing Stand parts to get truing stands back into tip-top working condition. Park Tool Truing Stand Parts Truing Stand Part UPC: 763477501172
Mpn: 215Sby Park Tool
—$17.54
MTC Multi-Function Tool 2.5, 3, 4, 5, 6 and 8mm hex wrenches T25 & T30 Torx compatible drivers Combo cross/straight tip screwdriver 8 & 15mm box wrenches Key ring holder Park Tool MTC Bike Multi-Tool UPC: 763477003867
Mpn: MTC-30by Park Tool
—$12.95
Park Tool saw guides ensure a straight, clean cut every time.Insert for the SG-7.2 Saw Guide to cut either alloy or carbon handlebars for the WTB PadLoc grips Item Specifications keyword search padloc Park Tool Saw Guides Head & Steerer Tube Cutting Tool UPC: 763477006554
Mpn: SGI-7by Park Tool
—$14.62
Pump Rebuild Kit for PFP-5 and PFP-7 floor pumps.Includes head, o ring and plunger gasket Park Tool Pump Rebuild Kit Pump Part UPC: 763477014498
Mpn: 1096Zby Park Tool
—$42.95
Shop quality, preset torque driver that limits the amount of torque applied to fasteners, preventing over tightening and damage to lightweight components. All metal internal construction for long life Comfortable ergonomic composite molded grip Includes 3mm, 4mm, 5mm and T25 bits (stored in handle) 1/4" drive Magnetic socket retains bits Item Specifications Bit Size 3mm Hex,4mm Hex,5mm Hex,T25 Bits Included Yes Park Tool Preset Torque Driver Torque Wrench UPC: 763477005809
Mpn: PTD-5by Park Tool
—$11.29
Parts For Park Tool Floor Pumps Includes complete pump head assembly and plunger gasket Works with both PFP-3 and PFP-6 Park Tool floor pumps Park Tool Floor Pump Parts Pump Part UPC: 763477014306
Mpn: 1081Kby Park Tool
—$22.95
Professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit. 6mm Sliding T-Handle Hex Wrench Carefully selected combination of Chrome Vanadium and S-2 tool steels Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless Machined, chamfered tips allow easier insertion into hex fittings Integrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy Sliding T-handle creates increased leverage and multiple access positions Item Specifications Ball End No Set or Individual Individual Style T-Handle Tip Size 6mm Hex Park Tool THH Sliding Hex Wrench Hex Wrench UPC: 763477009456
Mpn: THH-6by Park Tool
—$65.95
Securely holds the TS-4.2 Professional Wheel Truing Stand and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height. Features a wide, sturdy base, small parts compartments, spoke wrench holders, and is constructed of a durable composite material. Fits Park Tool TS-4.2 Professional Wheel Truing Stand Features a wide, sturdy base Includes a compartment designed to hold small parts while you work Spoke wrench holders Constructed of a durable composite material Footprint approximately 17.5" x 12.75" (44.5 x 32.4cm) with TS-4.2 installed Park Tool TSB-4.2 Tilting Truing Stand Base Truing Stand Accessory UPC: 763477008336
Mpn: TSB-4.2by Park Tool
—$61.95
Accessories and add-ons to hop up and specialize Park Tool repair stands.Designed to allow any Park Tool PRS-20, PRS-21 or PRS-23 Repair Stand to accept 12mm and 15mm thru axle wheeled bikes with 100mm dropout spacing Park Tool Stand Accessories Repair Stand Accessory UPC: 763477015266
Mpn: 1729-TAby Park Tool
—$12.49
Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006325
Mpn: SCW-14by Park Tool
—$8.75
Replacement Tip for HMR Shop Hammer293-8 Nylon replacement tip head for HMR-8 Shop Hammer Park Tool Hammer Tips Hammer UPC: 763477501738
Mpn: 293-8by Park Tool
—$13.55
Designed to fit internal spoke nipples found on many deep section aero rims. Fits internal nipples on many deep section aero rims Extra long (3.25"/ 8.5cm) spoke wrench socket Ergonomically-designed screwdriver handle Item Specifications Tip Size 5.5mm Park Tool Nipple Drivers Spoke Wrench UPC: 763477007322
Mpn: SW-18by Park Tool
—$199.95
Easily mounted on any workbench, PRS-7 is versatile and built to stand up to everyday shop use. Features the 100-5D Micro-adjust clamp with cam-actuated adjustment system for quick entry, adjustment and exit Narrow clamping jaws 2.7" (7cm) designed to clamp securely yet fit into tight areas or on short seat posts Fully adjustable clamping pressure prevents damage to thin-walled tubes Features powder coat finish and solid cast aluminum construction Mounting flange has four holes, allowing use of bolts or lag bolts to mount Mounting bolts not included Item Specifications Ship Weight 10lbs Stand Style Bench-mount Park Tool PRS-7 Repair Stand Repair Stands UPC: 763477005878
Mpn: PRS-7-2by Park Tool
—$23.95
Park Snap Ring Pliers Park Tool Snap Ring Pliers Snap Ring Plier UPC: 763477006042
Mpn: RP-3by Park Tool
—$10.49
Park Truing Stand parts to get truing stands back into tip-top working condition. Park Tool Truing Stand Parts Truing Stand Part UPC: 763477501189
Mpn: 216Sby Park Tool
—$7.25
Built for everyday bike shop use, the Shop Inflator utilizes a true dual Presta and Schrader head that rotates, making valve access quick and easy.Includes 3 different size O-Rings Park Tool Shop Inflator Shop Air Compressor Head UPC: 763477015389
Mpn: 1595Kby Park Tool
—$9.95
Shop quality cone wrenches from Park Tool are unmatched in quality and performance. Special "Y" head design puts more material where needed for strength and durability Precision sizing and a military grade industrial phosphate finish ensure an accurate fit and consistent quality Thin enough to use on the narrowest of adjusting cones Long, vinyl dipped handle for leverage and comfortable use Park Tool Shop Cone Wrench Cone Wrench UPC: 763477006363
Mpn: SCW-18by Park Tool
—$46.95
Dial Indicator Set bolts directly to the stand allowing for greater accuracy and a way to measure results.Dial Indicator Set bolts directly to the stand Park Tool Dial Indicators Truing Stand Part UPC: 763477002785
Mpn: DT-3I.2by Park Tool
—$17.02
Disc brake rotors should be regularly checked for wear to ensure safety and performance. The DCA-1 installs onto most digital, dial, or vernier calipers (including the Park Tool DC-1) and features protruding contact points that allow measurement of the center of the braking surface, bypassing the unworn edge to ensure an accurate measurement. The conical end points of the DCA-1 can be used to measure center-to-center distances of bolt holes for calculating bolt circle diameter (BCD) of chainrings and cranks.Compatible with most standard vernier, dial, and digital caliper designs Park Tool DCA-1 Digital Caliper Accessory Measuring Tool UPC: 763477002389
Mpn: DCA-1by Park Tool
—$35.95
Professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined, perfectly balanced 6061 aluminum handle hard anodized to take the rigors of everyday use.Ergonomic, CNC machined, perfectly balanced 6061 aluminum handle hard anodized Park Tool Precision Hex Driver Hex Wrench UPC: 763477002693
Mpn: DHD-3by Park Tool
—$23.95
Park Tool Hex wrenches made from industrial tool steel, hardened and tempered for shop use. Available in Y, L-Shape and folding versions Wall Mount does not include Hex Tools but is marked for sizes 2, 2.5, 3, 4, 5, 6, 8 & 10mm Y-Wrenchs not included but easily fit into base of holder Park Tool Hex Wrenches Hex Wrench UPC: 763477003669
Mpn: HXH-2Pby Park Tool
© 2024 Worldwide Cyclery