—$21.99

Make cutting hoses and pressing in barbs as easy as ever with our razor sharp hose cutter with integrated barb press.Designed for use with 5.0mm and 5.5mm hydraulic hose Tektro Hose Cutter Disc Hose Tool EAN: 4717592033779

by Tektro

—$32.95

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. 9, 10, 11 and 12-speed master links and chains Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links Item Specifications keyword search pack Drivetrain Speeds 9,10,11,12 Chain Tool Yes Wolf Tooth Masterlink Combo Pack Pliers Chain Tool UPC: 812719027021

by Wolf Tooth

—$23.50

E13 Bottom Bracket and Crank Spider Lockring Tool e*thirteen Bottom Bracket and Crank Spider Lockring Tool Bottom Bracket Tool EAN: 4712757578102

by e*thirteen

—$13.15

For removing and installing cassette lockrings on Shimano-compatible freehub bodies and some Centerlock disc brake systems. Fits 12-spline cassette lockrings from Shimano, SRAM, SunRace, SunTour, Chris King and others FR-5.2G uses a 5mm guide pin designed to fit perfectly inside a Quick-release axle Park Tool Lockring Tool Freehub & Cog Tool UPC: 763477003348

by Park Tool

—$14.09

Press adaptors for sealed bearing installation press. Compatible with PRESS-1 or PRESS-4 handles Sold individually Inner hole sized to fit 3/8" ACME threaded rod Sold individually (2 drifts required for some installations) Wheels Manufacturing Press Adaptors Bearing Tool UPC: 836572009093

by Wheels Manufacturing

—$41.99

Double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. Machined aluminum Anodized red Wheels Manufacturing Bottom Bracket Wrench Bottom Bracket Tool UPC: 811079023759

by Wheels Manufacturing

—$32.95

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. 9, 10, 11 and 12-speed master links and chains Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links Item Specifications keyword search pack Drivetrain Speeds 9,10,11,12 Chain Tool Yes Wolf Tooth Masterlink Combo Pack Pliers Chain Tool UPC: 812719027045

by Wolf Tooth

—$62.95

The SKT-6 is a shop quality set of six flat-faced sockets designed for use with common suspension fork fittings. Ideal for use with Park Tool Torque Wrenches, the 3/8" drive sockets are forged from tough chrome vanadium steel and chrome plated for lasting durability. Shop quality chrome plated 3/8" sockets for suspension and tuning work Set includes: 24, 26, 27, 28, 30 and 32mm 27mm socket is tapered for service work on Suntour suspension forks Park Tool Flat Faced Socket Set Suspension Tool UPC: 763477006509

by Park Tool

—$29.95

Park Tool bottom bracket tools for installation and removal of 16 notch bottom brackets. Fits 16-notch tool fittings with a major diameter (outside of notches) of 44 45 mm and a minor diameter (inside of notches) of 42.7 mm, including: Shimano BB80, BB5700, XT BB70, BB51, and previous external bearing threaded bottom bracket cups Threaded bottom bracket cups from Campagnolo , Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face X-type, Surly, Wheels, Fulcrum, and others Center lock disc brake rotor lockrings Bafang BBSH, BBS02 mid-drive motor lockrings Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477001658

by Park Tool

—$60

Leg removal tool for servicing Fox suspension.   This tool will be used for - For dislodging the damper shaft from the lower leg Spring & Damper Side of a Fox 32 Fork Spring Side ONLY for Fox 34, 36, & 40 Forks (Different tool is required for damper removal, search TL0012 for that tool) FOX Leg Removal Tool Suspension Tool UPC: 611056191460

by FOX

—$22.95

Park Tool bottom bracket tools for installation and removal of 16 notch bottom brackets. Made from high precision, hardened chromoly steel the BBT-19.2 can be turned with a 3/8" drive wrench, 1" wrench or Park Tool FRW-1 Freewheel Remover Wrench For installing & Removing Shimano, Truvativ, Race Face, FSA, Sram & Campagnolo 16-notch external bearing 44mm OD bottom bracket cups Fits most thru-axle Centerlock lock rings Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477000521

by Park Tool

—$41.50

Bearing-size specific cartridge bearing removal tool. Individual extractor for removing 6001, 6801 & 6901 sealed bearings Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing Tap the extractor out with a punch Wheels Manufacturing Bearing Extractor Bearing Tool UPC: 836572002902

by Wheels Manufacturing

—$9.49

A nearly indispensable tool for setting up SRAM derailleurs.Compatible with all eTap AXS cassettes 26T-44T Item Specifications Drivetrain Speeds 12 SRAM Chain Gap Adjustment Gauge Chain Tool UPC: 710845879616

by SRAM

—$28.95

Quickly and accurately determine the wear and stretch of any chain. Compatible with all bicycle chains For modern 9 and 10 speed chains, replace chain at or just before the 0.75% readings For 11 speed chains, replace at or just before the 0.5% reading Insert the Chain Checker's pins into two links, press the swing arm gauge tight, and check the gauge window for an accurate reading Park Tool CC-2 Chain Checker Wear Indicator UPC: 763477001313

by Park Tool

—$33.95

Tool for adjusting Fox suspension components. FOX Adjusting Tool Suspension Tool UPC: 611056182536

by FOX

—$79.29

High quality hub tools designed to work with DT Swiss components. DT Swiss Hub Tools Other Hub Tool EAN: 7630024358103

by DT Swiss

—$58.95

BBT PressFit Bottom Bracket Tool Set Designed and built to install and remove of the bearings used in bearings used in BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems BBT-30.4 features a bushing set used in conjunction with a head cup press to quickly and precisely press the BB30 and PF30 bearings in the bottom bracket shell The included BB30 bearing remover works from inside the shell to easily push out bearing Park Tool BBT PressFit Bottom Bracket Tool UPC: 763477000958

by Park Tool

—$62

Leg removal tool for servicing Fox suspension.   This tool will be used for - For dislodging the damper shaft from the lower leg Damper side ONLY for Fox 34, 36, & 40 Forks (Different tool is required for spring removal, search TL0011 for that tool) FOX Leg Removal Tool Suspension Tool UPC: 611056191477

by FOX

—$45

Tools for maintaining RockShox suspension forks. RockShox Suspension Fork Tools Suspension Tool UPC: 710845838927

by RockShox

—$52.95

This shop quality chain whip gives you incredible leverage without worry of slippage, and the head is uniquely shaped to allow quick and accurate access to any cassette or freewheel. Works on 5-speed to 12-speed mountain and road bike cassettes and freewheel Hardened bolts hold securely and make chain replacement easy Heavy duty, heat treated head Round vinyl coated handle The SR-2.3 is approximately 15" long (38cm) Park Tool SR-2.3 Sprocket Remover/Chain Whip Freehub & Cog Tool UPC: 763477007056

by Park Tool

—$8.24

The X2 6mm Hex Wrench can be used to hold the High-Speed-Compression or High-Speed-Rebound adjusters in place while adjusting the Low-Speed-Compression or Low-Speed-Rebound adjusters. FOX Float Adjustment Tool Suspension Tool UPC: 611056191613

by FOX

—$41.99

Bearing-size specific cartridge bearing removal tool. Individual extractor for removing 6003, 6803, 6903 & 17287 sealed bearings Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing Tap the extractor out with a punch Wheels Manufacturing Bearing Extractor Bearing Tool UPC: 836572004418

by Wheels Manufacturing

—$54.95

For removing and installing cassette lockrings on Shimano-compatible freehub bodies and some Centerlock disc brake systems. Has a specially modified head that allows removal and installation of some 12-spline cassette lockrings without removing the hub's quick-release skewer nut Removable, threaded handle makes replacement of a worn or damaged head quick and easy Fits 12-spline cassette lockrings from Shimano, SRAM, SunRace, SunTour, Chris King and others Park Tool Lockring Tool Freehub & Cog Tool UPC: 763477003409

by Park Tool

—$5.99

Shimano Disc Brake Caliper Bleeding SpacersUseful for retaining the pistons in the correct position when pads are removed from the caliper for bleeding Shimano Bleeding Spacer Brake Tool UPC: 689228276505

by Shimano

—$104.95

High quality tools ensure that headsets are properly serviced.Designed to install all sizes of head cups and one-piece bottom bracket cups Park Tool Headset Tools Headset Tool UPC: 763477004321

by Park Tool

—$26.95

Chainring lockring tools from Park Tool. Machined flat face for optimal lockring engagement 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque For lockrings with 41mm outside diameter with 16 notches Park Tool LRT Chainring Lockring Tool Chainring Tool UPC: 763477006905

by Park Tool

—$52

Rear shock tools for repair and maintenance of Rockshox rear shocks. Item Specifications keyword search shaft clamp keyword search vise jaw RockShox Rear Shock Tools Suspension Tool UPC: 710845761249

by RockShox

—$10.99

Park Chain Tool Replacement Pins Park Tool Chain Tool Replacement Pins Chain Tool Replacement Pin UPC: 763477002228

by Park Tool

—$21.95

Park Tool crank pullers can easily remove even the tightest cranks. Specifically designed to remove crank arms from splined Shimano Octalink and ISIS Drive bottom bracket spindles that do not use a "self extracting" system 22mm x 1mm fine thread provides leverage needed to remove tight crank arms Strong rotating tip system ensures smooth operation and long life Park Tool CCP-44 Crank Puller Crank Arm Tool UPC: 763477001276

by Park Tool

—$82.11

High quality hub tools designed to work with DT Swiss components. DT Swiss Hub Tools Other Hub Tool EAN: 7613052136394

by DT Swiss

—$8.99

Shimano Crank Arm ToolsFor use when installing left crankarm onto HollowtechII crank spindle Shimano Crank Arm Tools Crank Arm Tool UPC: 689228127593

by Shimano

—$11.99

RockShox Suspension Tools RockShox Rear Shock Tools Suspension Tool UPC: 710845663369

by RockShox

—$96.38

SRAM Ultimate Piston Press evenly pushes pistons back for pad replacement and bleeding. For hydraulic brakes Universal fit SRAM Ultimate Piston Press Brake Tool UPC: 710845879579

by SRAM

—$47.95

High quality tools ensure that headsets are properly serviced. The RT-2 is specially designed for removing 1-1/4" and 1.5" head cups RT-2's flared end fits through the head tube and snaps behind the cup, allowing the cup to be removed with a tap of a hammer Durable, heat treated, alloy steel with nickel finish for long life Heat-treated CroMoly Park Tool Headset Tools Headset Tool UPC: 763477006011

by Park Tool

—$27.95

The PW-5 is perfect for the home workshop or event tool box. 15mm pedal wrench, made from heat-treated spring steel, is built to last Vinyl dipped handle provides a comfortable grip Length: 11-1/2" (29 cm) Item Specifications Type P Handle Tip Size 15.0mm Park Tool PW-5 Home Mechanic Pedal Wrench Pedal Wrench UPC: 763477005632

by Park Tool

—$58.95

High quality tools ensure that headsets are properly serviced. Park Tool Threadless Nut Setters Headset Tool UPC: 763477008039

by Park Tool

—$30.95

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM BSA DUB, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45-47 mm and a minor diameter (inside of notches) of 44 mm, including: SRAM BSA DUB, Race Face Cinch, Rotor BSA30, Zipp Vuma, Hawk Racing BB3086, and more 3/8" drive fitting Park Tool BBT-79.3 Bottom Bracket Tool - 12-Notch Bottom Bracket Tool UPC: 763477001641

by Park Tool

—$42.95

High quality tools ensure that headsets are properly serviced. Fits 1", 1-1/8", 1-1/4" Heat treated CroMo Park Tool Headset Tools Headset Tool UPC: 763477006004

by Park Tool

—$21.95

Park Tool crank pullers can easily remove even the tightest cranks. Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles Also fits "Power Spline" cranks from SRAM using the 8mm thread bolt Strong rotating tip system ensures smooth operation and long life Park Tool CCP-22 Crank Puller Crank Arm Tool UPC: 763477001245

by Park Tool

—$82.11

High quality hub tools designed to work with DT Swiss components.Ring Nut removal tool for DT Swiss 3-pawl rear hubs DT Swiss Hub Tools Other Hub Tool EAN: 7630024333100

by DT Swiss

—$53.95

Park Other Hub Tools Park Tool Axle/Spindle Vise Inserts Other Hub Tool UPC: 763477000125

by Park Tool

—$84.02

The SRAM Pro Disc Brake Bleed Kit is designed for servicing SRAM disc brakes systems. High-quality syringes and hoses for precise bleeding Compatible with various SRAM brake models Includes essential tools like bleed blocks and adapters Ensures optimal brake performance with regular maintenance SRAM Bleed Kit Brake Tool UPC: 710845907371

by SRAM

—$14.95

Easily remove crank arms with this tool from e*thirteen. e*thirteen Crank Arm Extractor Crank Arm Tool EAN: 4710751500464

by e*thirteen

—$19.95

A worn bicycle chain can cause poor shifting and expensive drivetrain damage. The Park Tool CC-4.2 Chain Checker is a drop-in gauge that measures chain wear accurately. It contacts the chain in three places, eliminating guesswork. Compatible with 5 to 13-speed and single-speed chains, it indicates wear at 0.5%, 0.75%, and 1.0%, matching manufacturer replacement recommendations. Measures bicycle chain wear accurately, preventing expensive drivetrain damage Laser-cut design contacts the chain at three points, providing quick and precise wear measurement Compatible with 5 to 13-speed derailleur chains and single-speed chains Indicates chain wear at 0.5%, 0.75%, and 1.0%, aligning with manufacturer recommendations for replacement Park Tool CC-4.2 Chain Checker Chain Tool UPC: 763477001573

by Park Tool

—$66.99

Double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. Double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups Compatible with all Wheels Manufacturing bottom brackets Socket is machined for 1/2" drive, but a 3/8" to 1/2" adaptor is included so you can use it with 3/8" drive torque wrenches 48.5mm, 16-notch pattern matches up with Wheels Mfg bottom brackets, along with some FSA MegaEVO bottom brackets 44mm, 16-notch side matches up with Wheels Manufacturing bottom brackets, along with many other outboard bearing bottom brackets including Shimano, FSA MegaEXO and SRAM/Truvativ Machined aluminum Anodized red Wheels Manufacturing Bottom Bracket Wrench Bottom Bracket Tool UPC: 811079024558

by Wheels Manufacturing

—$84

Professional, shop-quality installation bearing press tools machined for precision fit. Wheels Manufacturing Bearing Press Bearing Tool UPC: 811079023117

by Wheels Manufacturing

—$32.95

Tools designed by Park Tool to service Bottom Brackets. Park Tool BBT 16 Notch Bottom Bracket Tool Bottom Bracket Tool UPC: 763477000583

by Park Tool

—$9.39

SRAM Brake Lever Tool SRAM Lever Tool Brake Tool UPC: 710845764004

by SRAM

—$14.09

Press adaptors for sealed bearing installation press. Open bore adaptor for installing PF30-OUT-29MM bottom bracket cups and 29x42 sealed bearings. 1/2 thru hole for use with Wheels Manufacturing bottom bracket press tools Compatible with PRESS-7, PRESS-7-PRO or PRESS-9-PRO handles/rod Inner hole sized to fit 3/8" ACME threaded rod Sold individually (2 drifts required for some installations) Wheels Manufacturing Press Adaptors Bearing Tool UPC: 811079025364

by Wheels Manufacturing

—$137.95

Park Tool high quality tools ensure that headsets are properly serviced. Oversized Crown Race Setting System uses two different insert rings to install bearing races on 1.5" and 1-1/4" forks The bearing surface is spared a direct hit by using an aluminum insert Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately Included extension allows work on fork steering tubes up to 425mm SHIS terminology: The CRS-15 services crown races in SHIS 33 and 40 Park Tool Headset Tools Headset Tool UPC: 763477002174

by Park Tool