—$20.95

No Tubes Tire Sealant available in many different sizes.Seals punctures up to 1/4" on standard and tubeless tires Stan's No Tubes Tire Sealant Tubeless Sealant UPC: 847746019725

by Stan's No Tubes

—$33.49

Stan s NoTubes Sealant is a thin, low viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30 F. One quart can convert up to 16 tires. Designed to seal punctures up to 1/4 Stable down to -30 degrees Fahrenheit Non-hazardous, non-corrosive, non-toxic Contains natural latex Suitable for use in tubeless tires and standard tubes Stan's No Tubes Tire Sealant Tubeless Sealant UPC: 847746019732

by Stan's No Tubes

—$25

Stan's Dual Action Repair for Tubeless (DART) to fixes damaged tires faster, easier and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan s sealant to quickly form a permanent airtight bond. The DART s plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won t pull out while riding the way a conventional plug can. One of the best features of the DART s design is that it doesn t require trimming once inserted, and excess material won t get in the way of your ride. DARTs can t be felt while riding, even on road tires, and they wear smooth naturally. Repairs large punctures and slices Reacts with Stan s sealant to form an instant, airtight seal Barbed plastic tip anchors into tire and will not pull out when riding Flexible material and laser-cut shape conforms to puncture and bonds with sealant Wears off clean, no trimming needed, and can not be felt while riding, even on road tires Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover Includes two pre-loaded DARTs for sealing multiple and larger punctures Clear caps keep DARTs clean and unthread quickly for fast deployment Simple and easy to refill Stan's No Tubes Dart Tool Tubeless Patch Kit UPC: 847746052654

by Stan's No Tubes

—$12.75

No Tubes Tire Sealant available in many different sizes. Graduated two ounce injector makes application of sealant simple, with no mess or waste of sealant Adapter fits both presta and schrader valves Seals punctures up to 1/4" on standard and tubeless tires Stan's No Tubes Tire Sealant Injector Syringe Tubeless Sealant UPC: 183720000151

by Stan's No Tubes

—$10.25

No Tubes Valve Tools Removes presta and schrader valve cores Fits between spokes for quick and easy core removal CNC machined, anodized finish with laser etched logo Stan's No Tubes Valve Tools Valve Tool UPC: 183720000267

by Stan's No Tubes

—$29.99

Thin, low viscosity liquid that coats the tire interior and seals punctures quickly. Designed to seal punctures up to 1/4" Stable down to -30 degrees Fahrenheit Non-hazardous, non-corrosive, non-toxic Contains natural latex Suitable for use in tubeless tires and standard tubes Allows for easy sealant installation and removal through the tire valve Compatible with Schrader and Presta valves Graduated cylinder for accurate sealant measurement Stan's No Tubes Tire Sealant Tubeless Sealant

by Stan's No Tubes

—$16

No Tubes Valve Parts Compatible with UST, TCS, TLR and ZTR mountain rims Nickel plated Extended rubber base aids inflation Stan's No Tubes Brass Valve Stems Tubeless Valves UPC: 183720000724

by Stan's No Tubes

—$45

Are you ready for one of the best Tubeless repair tools on the market and want to make sure you're more than prepared for the absolute worst case scenario?! If so we've got the bundle just for you! This bundle includes one Dart tool which only contains 2 plugs. Hopefully you don't need to use those but in the event you do we've got you with the refill pack included in this kit. The Stans Dart tool bundle comes with the tool as well as 7 total plugs including the ones pre-installed on the tool. You can rest easy knowing that you are more than prepared for a flat on the trail with these bad boys. Keep in mind, if you are that rider that get's a flat every ride, we do sell the refill kits on their own here if you need to really stock up or you've used all the ones in this bundle. We hope you don't have to use this all too often but when you do we hope that these are what helps get you home. Stan's Dual Action Repair for Tubeless (DART) to fixes damaged tires faster, easier and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan s sealant to quickly form a permanent airtight bond. The DART s plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won t pull out while riding the way a conventional plug can. One of the best features of the DART s design is that it doesn t require trimming once inserted, and excess material won t get in the way of your ride. DARTs can t be felt while riding, even on road tires, and they wear smooth naturally. Repairs large punctures and slices Reacts with Stan s sealant to form an instant, airtight seal Barbed plastic tip anchors into tire and will not pull out when riding Flexible material and laser-cut shape conforms to puncture and bonds with sealant Wears off clean, no trimming needed, and can not be felt while riding, even on road tires Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover Includes two pre-loaded DARTs for sealing multiple and larger punctures Clear caps keep DARTs clean and unthread quickly for fast deployment Simple and easy to refill Stan's No Tubes Dart Tool Tubeless Patch Kit

by Stan's No Tubes

—$20

Stan's Dart tool refill pack includes 5 DART Refills (required DART Tool not included). Reacts with Stan s sealant to form an instant, airtight seal Barbed plastic tip anchors into tire and will not pull out when riding Flexible fabric conforms to shape of puncture and bonds with sealant Wears off clean, no trimming needed, and can not be felt while riding, even on road tires Includes sealed container and carrier rack for fast and easy reloads Stan's No Tubes Dart Tool Refill Pack Tubeless Patch Kit UPC: 847746052661

by Stan's No Tubes

—$18

Thin yellow tape that creates an air tight seal for tubeless applications and can also be used as standard rim tape. Thin, lightweight tape is designed to provide and airtight seal for tubeless setups Suitable for use as rim tape in non tubeless application Item Specifications Rim Strip Width (mm) 30 Unit of Sale Retail-Single Stan's No Tubes Rim Tape Tubeless Tape UPC: 847746020431

by Stan's No Tubes

—$23

Lightweight aluminum valve stems are half the weight of standard brass models. Secure round base is compatible with most tubeless rims and a perfect fit for all Stan s BST and BST-R rims. Removable valve core makes adding sealant easy.Sold as a pair Item Specifications Defined Color Black keyword search Tubeless Length (mm) 35 Material Alloy Valve Core Removable Valve Presta Stan's No Tubes Alloy Valve Stems Tubeless Valves UPC: 847746038160

by Stan's No Tubes

—$39

Thin, low viscosity liquid with improved sealing capabilities over the standard NoTubes sealant. Twice the sealing crystals compared to standard NoTubes sealant XL crystals and standard crystals combine to seal larger punctures Stable down to -30 degrees Fahrenheit Not compatible with injectors or through valve cores Stan's No Tubes Race Tubeless Tire Sealant Tubeless Sealant UPC: 847746019749

by Stan's No Tubes

—$13.55

No Tubes Rim Tape. The same lightweight tape included with the tubeless kits One roll will tape up to five 26" rims or four 29" rims Works with all Stan's rims Item Specifications Rim Strip Width 21mm Stan's No Tubes Rim Tape Tubeless Tape UPC: 183720000205

by Stan's No Tubes

—$16.95

No Tubes Rim Tape. The same lightweight tape included with the tubeless kits One roll will tape up to five 26" rims or four 29" rims Works with all Stan's rims Item Specifications Rim Strip Width 27mm Stan's No Tubes Rim Tape Tubeless Tape UPC: 847746007227

by Stan's No Tubes

—$16.95

No Tubes Rim Tape. The same lightweight tape included with the tubeless kits One roll will tape up to five 26" rims or four 29" rims Works with all Stan's rims Item Specifications Rim Strip Width 25mm Stan's No Tubes Rim Tape Tubeless Tape UPC: 183720000281

by Stan's No Tubes

—$16

The original tubeless valve stem - most rims and a perfect fit for all Stan s BST rim models. Durable brass construction with removable valve core makes adding sealant easy. Universal Shrader Valve Fits holes 7.6 - 8.5mm Sold as a pair Item Specifications Defined Color Silver keyword search Tubeless Length (mm) 32 Material Brass Valve Core Removable Valve Schrader Stan's No Tubes Brass Valve Stems Tubeless Valves UPC: 847746009924

by Stan's No Tubes

—$16.48

No Tubes Valve Parts Compatible with ZTR, road tubeless and standard road rims converted to tubeless Nickel plated to prevent corrosion Conical rubber base extends higher for easier inflation Removable valve core Fits valve holes up to 8.3mm in diameter 44mm presta valve for tubeless use Stan's No Tubes Brass Valve Stems Tubeless Valves UPC: 183720000731

by Stan's No Tubes

—$23

Lightweight aluminum valve stems are half the weight of standard brass models. Secure round base is compatible with most tubeless rims and a perfect fit for all Stan s BST and BST-R rims. Removable valve core makes adding sealant easy.Sold as a pair Item Specifications Defined Color Black keyword search Tubeless Length (mm) 44 Material Alloy Valve Core Removable Valve Presta Stan's No Tubes Alloy Valve Stems Tubeless Valves UPC: 847746038177

by Stan's No Tubes

—$19

Thin yellow tape that creates an air tight seal for tubeless applications and can also be used as standard rim tape. Thin, lightweight tape is designed to provide and airtight seal for tubeless setups Suitable for use as rim tape in non tubeless application Item Specifications Rim Strip Width (mm) 33 Unit of Sale Retail-Single Stan's No Tubes Rim Tape Tubeless Tape UPC: 847746020448

by Stan's No Tubes

—$42

Stan s NoTubes Sealant is a thin, low viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30 F. One quart can convert up to 16 tires. Designed to seal punctures up to 1/4 Stable down to -30 degrees Fahrenheit Non-hazardous, non-corrosive, non-toxic Contains natural latex Suitable for use in tubeless tires and standard tubes Item Specifications keyword search 847746019763 Stan's No Tubes Tire Sealant Tubeless Sealant UPC: 847746019756

by Stan's No Tubes

—$20

Thin yellow tape that creates an air tight seal for tubeless applications and can also be used as standard rim tape. Thin, lightweight tape is designed to provide and airtight seal for tubeless setups Suitable for use as rim tape in non tubeless application Item Specifications Rim Strip Width (mm) 36 Unit of Sale Retail-Single Stan's No Tubes Rim Tape Tubeless Tape UPC: 847746020455

by Stan's No Tubes

—$13.49

Stan s SRD Spoke Powder fills the threads of the spoke and functions as both a lubricant during assembly and a thread lock once built. Each bottle contains 24g (.8oz) which will treat approximately 300 wheels. The PTFE powder in Stan s SRD Spoke Powder acts as a barrier, keeping the metal of the nipple from bonding to the metal of the spoke and preventing spoke wind up during build or adjustment. In promoting a smoother turning nipple, the powder also ensures more accurate and consistent wheel builds, with less ping and pop during and after the build. The powder also fills the threads of the spoke to act as a thread lock that prevents loosening and detensioning, and is particularly well suited for mechanically locking nipples such as Sapim s Secure Lock. Improves tension consistency and overall build quality Offers secure thread lock between spoke and nipple Can be used dry or as a slurry Prevents spoke wind up Prevents corrosion between spoke and nipple Works great with mechanically locking nipples Item Specifications Volume 2oz Stan's No Tubes Spoke Powder Assembly Compound Assembly Compound UPC: 847746038191

by Stan's No Tubes

—$15

Front end cap conversion kits for NoTubes 3.30 hubsReplacement/conversion end caps for NoTubes 3.30, 3.30Ti front hubs and ZTR front hubs with silver end caps Stan's No Tubes 3.30 Front Axle Conversion Kit UPC: 183720000892

by Stan's No Tubes

—$20

Front end cap conversion kits for NoTubes Neo and Neo Ultimate Increases the contact area between wheel and fork to provide a stronger and stiffer interface; must be used with a Rock Shox Torque Cap fork SealLock end caps feature a low friction U-cup seal that snaps into place Not compatible with OS or CenterLock hubs Stan's No Tubes Neo Front End Caps Front Axle Conversion Kit UPC: 847746019480

by Stan's No Tubes

—$20

Front end cap conversion kits for NoTubes Neo and Neo Ultimate This end cap works with both 15x100mm and 15x110mm thru axle front hubs; does not convert 100mm to 110mm hub SealLock end caps feature a low friction U-cup seal that snaps into place Not compatible with OS or CenterLock hubs Stan's No Tubes Neo Front End Caps Front Axle Conversion Kit UPC: 847746012405

by Stan's No Tubes

—$14.82

Replacement freehub bodies and XD drivers for NoTubes Neo hubs Kit includes: 6 pawls, 6 springs and 1 plastic retaining ring Fits all Neo and Neo Ultimate hubs Stan's No Tubes Neo Freehub Body UPC: 847746012696

by Stan's No Tubes

—$23.66

Rear axle kits for Stan's Neo hub. Stan's No Tubes Neo Rear Axle Kit Thru Axle & Skewer Part UPC: 847746050353

by Stan's No Tubes

—$23

Stan's Neo hub end caps. Stan's No Tubes Neo Rear End Caps Rear Axle Conversion Kit UPC: 847746012498

by Stan's No Tubes

—$80

Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. Comes standard on Neo hubs. 6-pawl system provides 36 points of contact and 10-degree engagment for quick acceleration Chromed steel bearings Wide bearing stance and axle design reduces flex and adds durability Low drag main seal prevents contamination and reduces resistance Item Specifications Cassette Body Type SRAM XD 11/12 Speed Material Alloy Stan's No Tubes Durasync Freehub Body UPC: 847746030737

by Stan's No Tubes

—$20

Front end cap conversion kits for NoTubes Neo and Neo Ultimate SealLock end caps feature a low friction U-cup seal that snaps into place Not compatible with OS or CenterLock hubs Stan's No Tubes Neo Front End Caps Front Axle Conversion Kit UPC: 847746012436

by Stan's No Tubes

—$289

Burly enough to handle the toughest of trails, yet light enough to pedal all day the Flow S1 is up for any challenge. Developed from rims ridden in Red Bull Rampage and raced on the World Cup DH circuit for years the S1 is now ready for action. With a 1.6mm deeper profile and reinforced rim walls the new Flow S1 offers greater impact strength, for an even wider range of use, with only a minor weight gain. Strong and light 6061 alloy rims, stainless steel rim eyelets, and easily replaceable standard spokes mean the Flow S1 is built to last. Combined with faster-engaging, CNC-machined Neo hubs available in configurations to fit nearly any bike, the Flow S1 is the ultimate trail, all-mountain, and enduro wheelset. Stan's Neo Hub with Durasync freehub featuring 10 degree engagement through 6 simultaneous pawls Neo Ultimate 6-pawl freehub body available as an upgrade for 5 degree engagement Shimano 11-speed driver for Dynasis and Road Neo hubs feature best-in-class convertibility through easy and simple endcaps 29mm internal width, WideRight for 2.35 - 2.8 tires Includes Stans No Tubes 29mm rim tape (installed) Requires additional valve stem for tubeless setup Chrome sealed-cartridge bearings Sapim Race 2.0/1.8/2.0 Double-butted spokes and Sapim Secure Lock brass nipples Item Specifications Cassette Body Type Shimano Dynasys 11 Speed Mountain Cassette Body Type Shimano/SRAM 11 Speed Road Cassette Body Type Shimano/SRAM 8, 9, 10 Speed Defined Color Black Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 584 / 650b / 27.5" Rear Axle 12mm Thru x 142mm Rim Width (Internal) 29 Tire Type Tubeless Ready Clincher Wheel Size 27.5" Stan's No Tubes Flow S1 Rear Wheel Rear Wheel UPC: 847746029823

by Stan's No Tubes

—$80

Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. Comes standard on Neo hubs. 6-pawl system provides 36 points of contact and 10-degree engagment for quick acceleration Chromed steel bearings Wide bearing stance and axle design reduces flex and adds durability Low drag main seal prevents contamination and reduces resistance Item Specifications Cassette Body Type Shimano Dynasys 11 Speed Mountain Cassette Body Type Shimano/SRAM 11 Speed Road Cassette Body Type Shimano/SRAM 8, 9, 10 Speed Material Alloy Stan's No Tubes Durasync Freehub Body UPC: 847746030720

by Stan's No Tubes

—$16

The original tubeless valve stem - most rims and a perfect fit for all Stan s BST rim models. Durable brass construction with removable valve core makes adding sealant easy. Sold as a pair Item Specifications Defined Color Silver keyword search Tubeless Length (mm) 55 Material Brass Valve Core Removable Valve Presta Stan's No Tubes Brass Valve Stems Tubeless Valves UPC: 847746009931

by Stan's No Tubes

—$26.89

Lightweight aluminum valve stems are half the weight of standard brass models. Secure round base is compatible with most tubeless rims and a perfect fit for all Stan s BST and BST-R rims. Removable valve core makes adding sealant easy.Sold as a pair Item Specifications Defined Color Blue keyword search Tubeless Length (mm) 35 Material Alloy Valve Core Removable Valve Presta Stan's No Tubes Alloy Valve Stems Tubeless Valves UPC: 847746049845

by Stan's No Tubes

—$26.89

Lightweight aluminum valve stems are half the weight of standard brass models. Secure round base is compatible with most tubeless rims and a perfect fit for all Stan s BST and BST-R rims. Removable valve core makes adding sealant easy.Sold as a pair Item Specifications Defined Color Orange keyword search Tubeless Length (mm) 35 Material Alloy Valve Core Removable Valve Presta Stan's No Tubes Alloy Valve Stems Tubeless Valves UPC: 847746049821

by Stan's No Tubes

—$90

Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. Comes standard on Neo hubs. 6-pawl system provides 36 points of contact and 10-degree engagment for quick acceleration Chromed steel bearings Wide bearing stance and axle design reduces flex and adds durability Low drag main seal prevents contamination and reduces resistance Item Specifications Cassette Body Type Shimano Micro Spline Stan's No Tubes Durasync Freehub Body UPC: 847746053170

by Stan's No Tubes

—$20

Front end cap conversion kits for NoTubes 3.30 hubsReplacement/conversion end caps for NoTubes 3.30, 3.30Ti front hubs and ZTR front hubs with silver end caps Stan's No Tubes 3.30 Front Axle Conversion Kit UPC: 847746019442

by Stan's No Tubes

—$29

Replacement bearings for NoTubes Neo hubs Stainless steel cartridge bearing found in all Neo Ultimate freehubs 26mm OD x 15mm ID 7mm thick Item Specifications Bearing I.D. (mm) 15 Bearing O.D. (mm) 26 keyword search 15267 Manufacturer Number 15267 Thickness 7 Stan's No Tubes Neo Cartridge Bearing UPC: 847746012849

by Stan's No Tubes

—$26.89

Lightweight aluminum valve stems are half the weight of standard brass models. Secure round base is compatible with most tubeless rims and a perfect fit for all Stan s BST and BST-R rims. Removable valve core makes adding sealant easy.Sold as a pair Item Specifications Defined Color Red Length (mm) 35 Material Alloy Valve Core Removable Valve Presta Stan's No Tubes Alloy Valve Stems Tubeless Valves UPC: 847746038320

by Stan's No Tubes

—$12.50

Replacement bearings for NoTubes Neo hubs Chrome steel cartridge bearing found in all Neo freehubs 26mm OD x 15mm ID 7mm thick Item Specifications Bearing I.D. (mm) 15 Bearing O.D. (mm) 26 keyword search 15267 Manufacturer Number 15267 Thickness 7 Stan's No Tubes Neo Cartridge Bearing UPC: 847746012832

by Stan's No Tubes

—$23

Lightweight aluminum valve stems are half the weight of standard brass models. Secure round base is compatible with most tubeless rims and a perfect fit for all Stan s BST and BST-R rims. Removable valve core makes adding sealant easy.Sold as a pair Item Specifications Defined Color Black Length (mm) 55 Material Alloy Valve Core Removable Valve Presta Stan's No Tubes Alloy Valve Stems Tubeless Valves UPC: 847746038184

by Stan's No Tubes

—$20

Stan's Neo hub end caps. This end cap set converts QRx135mm hubs to 12x142mm Thru-Axle This set is the stock endcap for 12x148mm Boost hubs Does not convert 135mm / 142mm hubs to 148mm Stan's No Tubes Neo Rear End Caps Rear Axle Conversion Kit UPC: 847746012481

by Stan's No Tubes

—$25

Thin yellow tape that creates an air tight seal for tubeless applications and can also be used as standard rim tape. Thin, lightweight tape is designed to provide and airtight seal for tubeless setups Suitable for use as rim tape in non tubeless application Item Specifications Rim Strip Width (mm) 39 Unit of Sale Retail-Single Stan's No Tubes Rim Tape Tubeless Tape UPC: 847746026815

by Stan's No Tubes

—$130

Speedsync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. Comes standard on Neo Uitimate hubs and is an upgrade for Neo hubs. Super-quick 6-pawl system provides 72 points of contact and 5-degree engagment for instant acceleration Stainless steel bearings for maximum durability Wide bearing stance and axle design reduces flex and adds durability Low drag main seal prevents contamination and reduces resistance Item Specifications Cassette Body Type SRAM XD 11/12 Speed Material Alloy Stan's No Tubes Speedsync Freehub Body UPC: 847746030782

by Stan's No Tubes

—$210

Burly enough to handle the toughest of trails, yet light enough to pedal all day the Flow S1 is up for any challenge. The S1 is now ready for action with a 1.6mm deeper profile and reinforced rim walls the new Flow S1 offers greater impact strength, for an even wider range of use, with only a minor weight gain. Strong and light 6061 alloy rims, stainless steel rim eyelets, and easily replaceable standard spokes mean the Flow S1 is built to last. Combined with faster-engaging, CNC-machined Neo hubs available in configurations to fit nearly any bike, the Flow S1 is the a great trail, all-mountain, and enduro wheel. Neo hubs feature best-in-class convertibility through easy and simple endcaps 29mm internal width, WideRight for 2.35 - 2.8 tires Includes Stans No Tubes 29mm rim tape (installed) Requires additional valve stem for tubeless setup Chrome sealed-cartridge bearings Sapim Race 2.0/1.8/2.0 Double-butted spokes and Sapim Secure Lock brass nipples Item Specifications Color Black Defined Color Black Designed for ebike Yes Front Axle 15mm Thru x 100mm Hub/Brake Compatibility 6-Bolt Disc ISO Diameter 584 / 650b / 27.5" keyword search electric bikes, electric bicycle, e-bike, e-bikes Rim Width (Internal) 29 Tire Type Tubeless Ready Clincher Valve Presta Wheel Size 27.5" Stan's No Tubes Flow S1 Front Wheel Front Wheel UPC: 847746029809

by Stan's No Tubes

—$52

Thin yellow tape that creates an air tight seal for tubeless applications and can also be used as standard rim tape. Thin, lightweight tape is designed to provide and airtight seal for tubeless setups Suitable for use as rim tape in non tubeless application Item Specifications Rim Strip Width (mm) 30 Unit of Sale Bulk Stan's No Tubes Rim Tape Tubeless Tape UPC: 847746020462

by Stan's No Tubes

—$26.89

Lightweight aluminum valve stems are half the weight of standard brass models. Secure round base is compatible with most tubeless rims and a perfect fit for all Stan s BST and BST-R rims. Removable valve core makes adding sealant easy.Sold as a pair Item Specifications Defined Color Orange Length (mm) 44 Material Alloy Valve Core Removable Valve Presta Stan's No Tubes Alloy Valve Stems Tubeless Valves UPC: 847746049838

by Stan's No Tubes

—$26.98

Lightweight aluminum valve stems are half the weight of standard brass models. Secure round base is compatible with most tubeless rims and a perfect fit for all Stan s BST and BST-R rims. Removable valve core makes adding sealant easy.Sold as a pair Item Specifications Defined Color Green Length (mm) 35 Material Alloy Valve Core Removable Valve Presta Stan's No Tubes Alloy Valve Stems Tubeless Valves UPC: 847746049869

by Stan's No Tubes

—$130

Speedsync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. Comes standard on Neo Uitimate hubs and is an upgrade for Neo hubs. Super-quick 6-pawl system provides 72 points of contact and 5-degree engagment for instant acceleration Stainless steel bearings for maximum durability Wide bearing stance and axle design reduces flex and adds durability Low drag main seal prevents contamination and reduces resistance Item Specifications Cassette Body Type Shimano Dynasys 11 Speed Mountain Cassette Body Type Shimano/SRAM 11 Speed Road Cassette Body Type Shimano/SRAM 8, 9, 10 Speed Material Alloy Stan's No Tubes Speedsync Freehub Body UPC: 847746030775

by Stan's No Tubes

—$34

Rear end cap conversion kits for NoTubes 3.30 hubs. Kit can be used to convert a NoTubes 3.30/3.30Ti QR disc hub to 12x142mm thru axle Includes 12x142mm axle and end caps for Shimano freehub Stan's No Tubes 3.30 Rear Axle Conversion Kit UPC: 847746000341

by Stan's No Tubes