OneUp

—$269.99

OneUp V3 Dropper Post: 31.6mmThis is the 31.6mm OneUp V3 dropper post, with internal cable routing and a choice of 90, 120, 150, 180, 210 or 240mm travel. Its 30mm compressed stack helps maximize drop within the space your frame allows. Match the 31.6mm diameter first, then choose travel from your measurements. Remote, clamp or brake adapter, and cable/housing are sold separately.Choose travel from measurementsCheck how far the post can enter the seat tube before it meets an obstruction, then measure from the seat clamp to your saddle rails at normal pedaling height. The longest travel number is only useful if the extended saddle height works for you. Allow room for the cable at the bottom and follow both the frame and post insertion requirements.Travel choices are 90, 120, 150, 180, 210 and 240mm. Included shims let you reduce the chosen travel by 10mm or 20mm. For example, a 180mm post can be set to 170mm or 160mm. Reducing travel does not turn the lower body into a shorter post, so insertion still needs checking.Use OneUp’s dropper length calculator with your own measurements. If your frame requires 30.9mm, use our 30.9mm OneUp V3 listing instead. These diameters are not interchangeable without an appropriate, frame-approved arrangement.What you need to finish the setupThe post uses internal cable routing and a sealed hydraulic cartridge. The cartridge does not need air-pressure top-ups. A remote, its clamp or brake adapter, and cable/housing are not included with the post. Choose the OneUp V3 remote and the correct remote clamp or adapter for your cockpit, or verify compatibility with the remote you intend to reuse.Included with the post One V3 dropper post in the selected 31.6mm diameter and travel Cable barrel end Packet of light suspension grease Two sets of 10mm travel-reduction shims Specs and maintenance Diameter: 31.6mm Routing: internal, cable actuated Travel options: 90 / 120 / 150 / 180 / 210 / 240mm Compressed stack height: 30mm OneUp service intervals: 120 hours for clean and grease; 350 hours for full rebuild A sealed cartridge still needs a clean, lubricated post around it. Keep the wiper clean and follow OneUp’s service instructions. Our OneUp V3 overview explains the cartridge, bushing and seal changes from V2. Use the current manufacturer dimensions when making your fit decision.Original V3 comparison graphicsThe graphics below show the original V3 launch specifications and contemporary comparisons. For current dimensions and fit, use OneUp’s linked length calculator.

by OneUp

—$269.99

OneUp V3 Dropper Post: 30.9mmThis OneUp V3 dropper post has a 30.9mm diameter and uses internal cable routing. Choose 90, 120, 150, 180, 210 or 240mm of travel to suit your frame and saddle height. The post has a low 30mm compressed stack to help fit more drop into the space available. Remote, clamp or brake adapter, and cable/housing are sold separately.Choose travel from measurementsMeasure your normal pedaling height from the top of the seat clamp to the saddle rails, then check the usable insertion depth inside the frame. A bend, bottle boss or other obstruction can limit insertion before the post is fully lowered. Leave the cable clearance specified by OneUp, and respect both frame and post minimum-insertion requirements.Travel choices are 90, 120, 150, 180, 210 and 240mm. Included shims let you reduce the chosen travel by 10mm or 20mm. For example, a 180mm post can be set to 170mm or 160mm. Reducing travel does not turn the lower body into a shorter post, so insertion still needs checking.Use OneUp’s dropper length calculator with your own measurements. If your frame requires 31.6mm, use our 31.6mm OneUp V3 listing instead. These diameters are not interchangeable without an appropriate, frame-approved arrangement.What you need to finish the setupThe post uses internal cable routing and a sealed hydraulic cartridge. The cartridge does not need air-pressure top-ups. A remote, its clamp or brake adapter, and cable/housing are not included with the post. Choose the OneUp V3 remote and the correct remote clamp or adapter for your cockpit, or verify compatibility with the remote you intend to reuse.Included with the post One V3 dropper post in the selected 30.9mm diameter and travel Cable barrel end Packet of light suspension grease Two sets of 10mm travel-reduction shims Specs and maintenance Diameter: 30.9mm Routing: internal, cable actuated Travel options: 90 / 120 / 150 / 180 / 210 / 240mm Compressed stack height: 30mm OneUp service intervals: 120 hours for clean and grease; 350 hours for full rebuild A sealed cartridge still needs a clean, lubricated post around it. Keep the wiper clean and follow OneUp’s service instructions. Our OneUp V3 overview explains the cartridge, bushing and seal changes from V2. Use the current manufacturer dimensions when making your fit decision.Original V3 comparison graphicsThe graphics below show the original V3 launch specifications and contemporary comparisons. For current dimensions and fit, use OneUp’s linked length calculator.

by OneUp

—$269.99

V3 DROPPER POST No Remote Included. Check Them Out here > V3 Dropper Remote Dropper Remote Adapter > V3 Dropper Remote Adapter Lighter, smoother and more reliable. Simply the best. Introducting the NEW OneUp Components V3 Dropper Post: An ultra lightweight, high performance, long travel dropper. OneUp's third generation dropper post has been over 3 years in the making. It's better than the award-winning V2 in every way. It's higher, longer, smoother,more reliable and has the shortest stack and total length of any other dropper. Now you get even more drop with the post. Lighter The new V3 is the lightest infinitely adjustable dropper on the marketat any given travel.It’s even lighter than XC specific lightweight droppers.The V3 is available in the widest range of travel options and suitable for all rider weights and riding styles. We’ve shaved weight from almost every single part to make the V3 Dropper 60 to 70 grams lighter than our V2.The biggest weight savings come from our new hydraulic cartridge that’s fully sealed and never needs to be inflated. The new V3 dropper is 238g lighter than a Reverb AXS, 155g lighter than a Transfer and up to 60g lighter than the 2-position Transfer SL. You can save an additional 10g with our Ti Bolt Upgrade Kit. Smoother Riders asked for improved seals,reduced play and smoother action from the V2.We’ve addressed all of these with the V3. Cartridge: For smoother action,the all-new cartridge requires 75% lessl ever force when the saddle is loaded and much less breakaway force to initiate.That means it’s even quicker and easier to drop your saddle while riding. Bushings: OneUp upgraded all the bushings to use a low-friction,self-lubricating IGUS material and increased bushing overlap to further reduce friction.180-240 drop posts have an additional bushing to further support the increased overlap. Seals: OneUp developed a completely new,high-performance collar with a custom SKF wiper seal to keep dirt out and grease in. The new seal and bushings keep the V3 running smoother for longer,with less maintenance. Pins: To eliminate rotational play without increasing friction, OneUp doubled the number of anti-rotation pins and added 2 oversized polymer pins. V3 Product Highlights 60-70g lighters 75% reduction in breakway force and smoother actuation Fully sealed cartridge that doesn't need to be inflated Compressed stack height is 3mm shorter Total length is 10mm shorter Increased bushing overlap IGUS bushings Low friction SKF Seal new cartridge is 100% recycable SPECS Warranty - 2 Years Routing - Internal Diameters - 30.9mm / 31.6mm / 34.9mm Travel - 90mm / 120mm / 150mm / 180mm / 210mm / 240mm Total Length - 295mm / 350mm / 415mm / 480mm / 545mm / 610mm Compressed Stack Height: 30mm (35mm for 34.9) Service and Maintenance Post can be fully disassembled using only a OneUp multi-tool in less than 10 minutes(14mmwrench,5mmHex,2mmHex) No custom tools required and no need to send your post away for maintenance No need to adjust or top up air pressure Longer service intervals: 120 hours for clean and grease / 350 hours for rebuild 2 year warranty

by OneUp