Bike Yoke

—$30

Bike Yoke Service Kit, Revive V1   Service kit includes wiper, upper bushing, lower bushing, foam ring, and 6 brass keyway pins Bike Yoke Revive Dropper Seatpost Part

by Bike Yoke

—$130

Bike Yoke Yoke SJ02, Stumpjumper 27.5", 29", 6Fatty, 2016-2019   This BikeYoke allows the use of a standard shock in your Specialized bike.   Shock Sizes: 190x45mm, 190x51mm (7.5"x2.0") recommended One Set Includes:1x BikeYoke1x DU bushing1x reducer1x stainless steel bolt   Compatible Bikes: Specialized Stumpjumper 29" 2016 Specialized Stumpjumper 650b 2016 Specialized Stumpjumper 6Fatty 2016 Specialized Stumpjumper 29" 2017 Specialized Stumpjumper 650b 2017 Specialized Stumpjumper 29" 2018     Bike Yoke Stumpjumper Rear Shock Part EAN: 4713291520237

by Bike Yoke

—$10

Bike Yoke Quick Reset Lever, Revive - Black   Attaches to your Reset Hex Slot instead of the 4mm Allen Key, secured by an O-ring (included).No more need to grab your 4mm Allen Key. Bike Yoke Revive Dropper Seatpost Part

by Bike Yoke

—$35.75

BikeYoke Shifty Shifty is a small but extremely effective little device for your SRAM 1x11 or 1x12 rear derailleur. Particularly when riding in wet and muddy conditions, we found out, that SRAM rear derailleurs lack shifting accuracy, due to the fact that the original pulley rotates with its plastic body on a steel axle. The pulley experiences extensive friction, when dirt, water or mud come into play and causes lack of precision or even "ghost-shifting" because the rear derailleur is not able to react smoothly to the trigger's action since the shifting cable cannot move freely. BikeYoke Shifty features an anodized 6061-T6 aluminum body, which encloses a stainless steel bearing for ultra-low friction, even when playing in the dirt. Features Shifty replaces the original plastic cable pulley wheel with an aluminum pulley, featuring a sealed (2RS) stainless steel bearing to ensure free rotation even when riding in muddy conditions. 1x Shifty pulley - 6061-T6 aluminium, anodized, ball bearings 1x axle for mounting 1x bolt for mounting Shifty is compatible with: XX1 11 Speed X01 11 Speed GX1 11 Speed NX1 11 Speed X1 11 Speed EX 11 Speed XX1 Eagle 12 Speed X01 Eagle 12 Speed GX Eagle 12 Speed NX Eagle 12 Speed X01 DH 7 Speed *On these rear derailleurs, the original rivet of the pulley must be removed and replaced with the bolt kit supplied with the Shifty. Installation Instructions Shifty Installation Bike Yoke Shifty Pulley Assembly

by Bike Yoke

—$14

Premium cable set includes 3mm outer casing for easy flex around tight corners. Premium inner cable also included Improves function of dropper post when used with headset and other internal routing Bike Yoke Dropper Cable Kit Dropper Seatpost Part EAN: 4713291522927

by Bike Yoke

—$35.75

BikeYoke Shifty Shifty is a small but extremely effective little device for your SRAM 1x11 or 1x12 rear derailleur. Particularly when riding in wet and muddy conditions, we found out, that SRAM rear derailleurs lack shifting accuracy, due to the fact that the original pulley rotates with its plastic body on a steel axle. The pulley experiences extensive friction, when dirt, water or mud come into play and causes lack of precision or even "ghost-shifting" because the rear derailleur is not able to react smoothly to the trigger's action since the shifting cable cannot move freely. BikeYoke Shifty features an anodized 6061-T6 aluminum body, which encloses a stainless steel bearing for ultra-low friction, even when playing in the dirt. Features Shifty replaces the original plastic cable pulley wheel with an aluminum pulley, featuring a sealed (2RS) stainless steel bearing to ensure free rotation even when riding in muddy conditions. 1x Shifty pulley - 6061-T6 aluminium, anodized, ball bearings 1x axle for mounting 1x bolt for mounting Shifty is compatible with: XX1 11 Speed X01 11 Speed GX1 11 Speed NX1 11 Speed X1 11 Speed EX 11 Speed XX1 Eagle 12 Speed X01 Eagle 12 Speed GX Eagle 12 Speed NX Eagle 12 Speed X01 DH 7 Speed *On these rear derailleurs, the original rivet of the pulley must be removed and replaced with the bolt kit supplied with the Shifty. Installation Instructions Shifty Installation Bike Yoke Shifty Pulley Assembly

by Bike Yoke

—$20

Service kit includes wiper, lower bushing, foam ring, c-clip R12, and 6 glide pins YB2122 and YB2123 include lower tube, upper stanchion bushing and wiper Note on lower tubes: diameter can be changed between 30.9 and 31.6mm but NOT 34.9mm. Length must stay the same as original 3rd party web sales (eBay, Amazon, etc.) are strictly prohibited by the manufacturer All internal parts are available through BTI's Factory Service Center. Please contact customer service for any other parts that are needed Bike Yoke Revive + Divine Service Kit Dropper Seatpost Part UPC: 4713291522606

by Bike Yoke

—$130

Bike Yoke, Yoke CB01, For Specialized Camber 27.5" / 29", 2016-2018   This BikeYoke allows the use of a standard shock in your Specialized bike.   Shock Sizes: 190x45mm, 190x51mm (7.5"x2.0") recommended     For questions regarding compatibility, please check the pdf-documents!One Set Includes:1x BikeYoke1x DU bushing1x reducer1x stainless steel bolt   Compatible Bikes: Specialized Camber 29" 2016 Specialized Camber 650b 2016 Specialized Camber 29" 2017 Specialized Camber 650b 2017 Specialized Camber 29" 2018 Specialized Camber 650b 2018     Bike Yoke Specialized Camber Rear Shock Part EAN: 4713291520244

by Bike Yoke

—$35.75

BikeYoke Shifty Shifty is a small but extremely effective little device for your SRAM 1x11 or 1x12 rear derailleur. Particularly when riding in wet and muddy conditions, we found out, that SRAM rear derailleurs lack shifting accuracy, due to the fact that the original pulley rotates with its plastic body on a steel axle. The pulley experiences extensive friction, when dirt, water or mud come into play and causes lack of precision or even "ghost-shifting" because the rear derailleur is not able to react smoothly to the trigger's action since the shifting cable cannot move freely. BikeYoke Shifty features an anodized 6061-T6 aluminum body, which encloses a stainless steel bearing for ultra-low friction, even when playing in the dirt. Features Shifty replaces the original plastic cable pulley wheel with an aluminum pulley, featuring a sealed (2RS) stainless steel bearing to ensure free rotation even when riding in muddy conditions. 1x Shifty pulley - 6061-T6 aluminium, anodized, ball bearings 1x axle for mounting 1x bolt for mounting Shifty is compatible with: XX1 11 Speed X01 11 Speed GX1 11 Speed NX1 11 Speed X1 11 Speed EX 11 Speed XX1 Eagle 12 Speed X01 Eagle 12 Speed GX Eagle 12 Speed NX Eagle 12 Speed X01 DH 7 Speed *On these rear derailleurs, the original rivet of the pulley must be removed and replaced with the bolt kit supplied with the Shifty. Installation Instructions Shifty Installation Bike Yoke Shifty Pulley Assembly

by Bike Yoke

—$380

Mechanical Ain't Dead Dropper Remote Sold Separately The new REVIVE 3.0 is the latest evolution of our flagship model, benefitting from already very successful 10 years of experience with its predecessors. We didn't touch anything proven, and so the famed reliable and buttery smooth hydraulic system remains untouched, yet we have succeeded in making our multiple award-winner even better. The most important features and highlights of REVIVE 3.0 include: new saddle clamps for a 5mm lower stack height a new 360° rotatable foot unit shortens the overall length of the seat post by further 10 mm new slide-on cable barrel for easier installation new BikeYoke cables (3mm housing + 0.9mm polished and coated stainless wire) travel reduction in 5mm increments (4x5mm spacer included) 3D-forged, one-piece upper tube for increased stiffness and strength redesigned actuation linkage for imprived feel and feedback two-piece saddle bolts with integrated conical washers for easier saddle mounting The Revive 3.0 is available in four different lengths, all of which allowing for infinitely adjustable drop. Its extremely short stack height helps to maximize the drop on your bike. The low overall weight and the unrivaled smoothness, even under cold temperatures, should also be highlighted. If you are right in between two sizes, you may opt for the longer one, as the drop, and thus the overall length of the post can be reduced using 5mm spacers. This allows you to get the most of the available drop without the need to opt for a shorter version. Although all our remotes will work with the REVIVE THREE, we recommend our Triggy Alpha long for light and defined, actuation due to its longer paddle. REVIVE 3.0 includes 1x REVIVE THREE seatpost 1x cable housing 1600mm 1x inner wire 1800mm 1x cable barrel 2x housing endcap 1x cable crimp 1x air valve adapter 1x Quick-Reset-Lever 4x 5mm travel adjust spacer 1x remote (optional) Dropper Remote Sold Separately Bike Yoke Revive 3 Dropper Seatpost Dropper Seatpost UPC: 4713291522774

by Bike Yoke

—$30

Bike Yoke Service Kit, Revive V1   Service kit includes wiper, upper bushing, lower bushing, foam ring, and 6 brass keyway pins Bike Yoke Revive Dropper Seatpost Part

by Bike Yoke

—$15.98

Bike Yoke Stand Alone Clamp for Triggy, Black   Our clever Splits clamp attaches our Triggy directly to the handlebar.Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on!A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look.By the way: SRAM shifter triggers can also also be attached to the handlebars usingour Splits clamp. Bike Yoke Triggy Other Brake Lever Part

by Bike Yoke

—$25.49

Bike Yoke I-Spec II Adapter for Triggy - Left, Black   Who does not love a nicely cleaned up cockpit?This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches your Triggy directly to a Shimano I-Spec II brake and saves an extra clamp on the handlebars.You can also use it to mate SRAM triggers with Shimano brakes.Our BikeYoke I-Spec II adapter can be used for left or right Shimano brake levers and you can get them as a set for both sides.   Adapts your Triggy (or other direct mounted shifters) to Shimano I-Spec handlebar clamps I-Spec B adapter is backward compatible with I-Spec A clamps Bike Yoke Triggy Other Brake Lever Part

by Bike Yoke

—$60

Smooth ball bearing actuation Angle adjustable paddle 2 different lever lengths for crisper or softer operating forces. The short version uses exactly the same and proven lever geometry of the original Triggy. The long version extends the paddle by 7mm and reduces the operating forces by approx. 15%. Black anodized aluminum body and lever 2 positions of the mounting thread Integrated tension clamp New cable clamp for compatibility with all cable seatposts Light weight: 32g / 34g (short / long) Maximum pulling path: 11 mm Must be paired with YB-110* for bar clamp or brake perch attachment 3rd party web sales (eBay, Amazon, etc.) are strictly prohibited by the manufacturer Bike Yoke Triggy Alpha Long Dropper Seatpost Remote UPC: 4713291521630

by Bike Yoke

—$350

Mechanical Ain't Dead Dropper Remote Sold Separately The new REVIVE 3.0 is the latest evolution of our flagship model, benefitting from already very successful 10 years of experience with its predecessors. We didn't touch anything proven, and so the famed reliable and buttery smooth hydraulic system remains untouched, yet we have succeeded in making our multiple award-winner even better. The most important features and highlights of REVIVE 3.0 include: new saddle clamps for a 5mm lower stack height a new 360° rotatable foot unit shortens the overall length of the seat post by further 10 mm new slide-on cable barrel for easier installation new BikeYoke cables (3mm housing + 0.9mm polished and coated stainless wire) travel reduction in 5mm increments (4x5mm spacer included) 3D-forged, one-piece upper tube for increased stiffness and strength redesigned actuation linkage for imprived feel and feedback two-piece saddle bolts with integrated conical washers for easier saddle mounting The Revive 3.0 is available in four different lengths, all of which allowing for infinitely adjustable drop. Its extremely short stack height helps to maximize the drop on your bike. The low overall weight and the unrivaled smoothness, even under cold temperatures, should also be highlighted. If you are right in between two sizes, you may opt for the longer one, as the drop, and thus the overall length of the post can be reduced using 5mm spacers. This allows you to get the most of the available drop without the need to opt for a shorter version. Although all our remotes will work with the REVIVE THREE, we recommend our Triggy Alpha long for light and defined, actuation due to its longer paddle. REVIVE 3.0 includes 1x REVIVE THREE seatpost 1x cable housing 1600mm 1x inner wire 1800mm 1x cable barrel 2x housing endcap 1x cable crimp 1x air valve adapter 1x Quick-Reset-Lever 4x 5mm travel adjust spacer 1x remote (optional) Dropper Remote Sold Separately Bike Yoke Revive 3 Dropper Seatpost Dropper Seatpost UPC: 4713291522743

by Bike Yoke

—$169.99

Bike Yoke Yoke #6, For Specialized Enduro 27.5+, 29" 2017-2018 - Low Setting   This BikeYoke allows the use of a standard shock in your Specialized bike.If you are wondering, why our BikeYokes for 2017 Enduros are more expensive.Specialized has completely changed the yoke design for 2017 models It is a lot bigger, than previous yokes, which means more raw material and CNC-machining time is needed to create a 2017 Enduro BikeYoke It has integrated ball bearings, which are also included in our BikeYoke for your 2017 Enduro For questions regarding compatibility, please check the pdf-documents!One Set Includes:1x BikeYoke #6 - Y06 for high setting or 1x BikeYoke #6.1 - Y061 for low setting2x bearing1x DU bushing1x reducer1x stainless steel bolt   Compatible Bikes: Specialized Enduro 2017 650b Specialized Enduro 2017 29" Shock size: 200x57mm (7.875"x2.25")     Bike Yoke Specialized Enduro Rear Shock Part EAN: 4713291520435

by Bike Yoke

—$66

Bike Yoke Triggy Remote, Front Feed - Black   Many dropper posts feature remotes, that do not live up to a standard, that you would expect, when paying a lot of money for a dropper post. Even the most expensive droppers out there often come with remotes, that have ridiculous play, are made from plastic, bulky, heavy, or just do not function as well, as they should.We put a lot of time and testing into the design of a remote lever that fulfils everything we want to see in a remote for dropper posts. We believe it is the best remote you can get! It is super leightweight (24g without clamp) It is made from 6061-T6 aluminium with a CNC finish, black anodized and laser engraved You can (but don´t have to) bolt it directly to the most common brakes without an extra clamp It has an unrivaled finish and touch You have individual mounting points to adjust position It has an integrated cable tensioner If you are running a 1-by drivetrain, this aluminum made smart little trigger-style remote for dropposts replaces your original thumbshifter for droppost models and other devices, such as: Kindshock LEV, LEV Integra, Supernatural Race Face Turbine 9Point8 Fall Line Easton Haven Specialized Command Post X-Fusion Hilo SL Thomson Elite (old version) Canyon Strive Shapeshifter BikeYoke REVIVE Generally speaking, Triggy front will work with any post, that features following: Shift cable is is installed from the front through the remote and clamped at the seatpost (means shift cable head is placed in the remote and not in the post) Required cable pull for post is less than 13mm If you are using a seatpost different from the ones listed above, please contact us about compatibility and we will help you find out, if it works with your post. Triggy front includes: Remote lever unit (black anodized and laser engraved aluminum body and lever with cable tension adjuster) "Splits" clamp or optional I-Spec adapter Shift cable Shift cable endcap   FAQ What do the options mean? Splits Clamp : Triggy comes with Splits clamp DeHy Triggy B: Triggy comes with I-Spec B adapter for Shimano I-Spec B brakes DeHy Triggy II: Triggy comes with I-Spec II adapter for Shimano I-Spec II brakes (more information on I-Spec HERE)How can I mount my Triggy to my handlebar?There are several ways to mount Triggy: Use our "Splits" clamp and mount it stand-alone to your handlebar Without our clamp directly to a SRAM brake with Matchmaker lever clamp Without our clamp directly to a Magura brake brake with Siftmix lever clamp Without our clamp directly to a Hope brake with Hope Shifter Mount lever clamp Without our clamp directly to a Formula brake with Mixmaster brake clamp Without clamp directly to a Shimano I-Spec brake, using our optional I-Spec B or I-Spec II adapters Use a regular SRAM shifter clamp and mount it stand-alone to your handlebar   Bike Yoke Triggy Dropper Seatpost Part

by Bike Yoke

—$130

1x BikeYoke #4 - Y04 for 200x57mm shock or 1x BikeYoke #2.1 - Y021 for 210x55mm shock   This BikeYoke allows the use of a standard shock in your Specialized bike.Includes: 1x BikeYoke #3 - Y03 for 200x57mm (7.875x2.25) shock or 1x BikeYoke #5 - Y05 for 210x55mm shock 1x DU bushing 1x reducer 1x stainless steel bolt   Compatible Bikes: Specialized Enduro 2013 29" Specialized Enduro 2014 29" Specialized Enduro 2015 29" Specialized Enduro 2016 29"     Bike Yoke Specialized Enduro Rear Shock Part EAN: 4713291520206

by Bike Yoke

—$60

Smooth ball bearing actuation Angle adjustable paddle 2 different lever lengths for crisper or softer operating forces. The short version uses exactly the same and proven lever geometry of the original Triggy. The long version extends the paddle by 7mm and reduces the operating forces by approx. 15%. Black anodized aluminum body and lever 2 positions of the mounting thread Integrated tension clamp New cable clamp for compatibility with all cable seatposts Light weight: 32g / 34g (short / long) Maximum pulling path: 11 mm Must be paired with YB-110* for bar clamp or brake perch attachment 3rd party web sales (eBay, Amazon, etc.) are strictly prohibited by the manufacturer Bike Yoke Triggy Alpha Short Dropper Seatpost Remote UPC: 4713291521623

by Bike Yoke

—$130

Bike Yoke Yoke #3, For Specialized Enduro 29" 2013-2016 - 200x57mm Shock   This BikeYoke allows the use of a standard shock in your Specialized bike.Includes: 1x BikeYoke #3 - Y03 for 200x57mm (7.875x2.25) shock or 1x BikeYoke #5 - Y05 for 210x55mm shock 1x DU bushing 1x reducer 1x stainless steel bolt   Compatible Bikes: Specialized Enduro 2013 29" Specialized Enduro 2014 29" Specialized Enduro 2015 29" Specialized Enduro 2016 29"     Bike Yoke Specialized Enduro Rear Shock Part EAN: 4713291520190

by Bike Yoke

—$39

BikeYoke Shifty Shifty is a small but extremely effective little device for your SRAM 1x11 or 1x12 rear derailleur. Particularly when riding in wet and muddy conditions, we found out, that SRAM rear derailleurs lack shifting accuracy, due to the fact that the original pulley rotates with its plastic body on a steel axle. The pulley experiences extensive friction, when dirt, water or mud come into play and causes lack of precision or even "ghost-shifting" because the rear derailleur is not able to react smoothly to the trigger's action since the shifting cable cannot move freely. BikeYoke Shifty features an anodized 6061-T6 aluminum body, which encloses a stainless steel bearing for ultra-low friction, even when playing in the dirt. Features Shifty replaces the original plastic cable pulley wheel with an aluminum pulley, featuring a sealed (2RS) stainless steel bearing to ensure free rotation even when riding in muddy conditions. 1x Shifty pulley - 6061-T6 aluminium, anodized, ball bearings 1x axle for mounting 1x bolt for mounting Shifty is compatible with: XX1 11 Speed X01 11 Speed GX1 11 Speed NX1 11 Speed X1 11 Speed EX 11 Speed XX1 Eagle 12 Speed X01 Eagle 12 Speed GX Eagle 12 Speed NX Eagle 12 Speed X01 DH 7 Speed V2 now compatible with the T-Type as well as the following SRAM 1x12 rear derailleurs: X01, XX1 *On these rear derailleurs, the original rivet of the pulley must be removed and replaced with the bolt kit supplied with the Shifty. Installation Instructions Shifty Installation Bike Yoke Shifty V2 Pulley Assembly UPC: 4713291523351

by Bike Yoke

—$400

Mechanical Ain't Dead Dropper Remote Sold Separately The new REVIVE 3.0 is the latest evolution of our flagship model, benefitting from already very successful 10 years of experience with its predecessors. We didn't touch anything proven, and so the famed reliable and buttery smooth hydraulic system remains untouched, yet we have succeeded in making our multiple award-winner even better. The most important features and highlights of REVIVE 3.0 include: new saddle clamps for a 5mm lower stack height a new 360° rotatable foot unit shortens the overall length of the seat post by further 10 mm new slide-on cable barrel for easier installation new BikeYoke cables (3mm housing + 0.9mm polished and coated stainless wire) travel reduction in 5mm increments (4x5mm spacer included) 3D-forged, one-piece upper tube for increased stiffness and strength redesigned actuation linkage for imprived feel and feedback two-piece saddle bolts with integrated conical washers for easier saddle mounting The Revive 3.0 is available in four different lengths, all of which allowing for infinitely adjustable drop. Its extremely short stack height helps to maximize the drop on your bike. The low overall weight and the unrivaled smoothness, even under cold temperatures, should also be highlighted. If you are right in between two sizes, you may opt for the longer one, as the drop, and thus the overall length of the post can be reduced using 5mm spacers. This allows you to get the most of the available drop without the need to opt for a shorter version. Although all our remotes will work with the REVIVE THREE, we recommend our Triggy Alpha long for light and defined, actuation due to its longer paddle. REVIVE 3.0 includes 1x REVIVE THREE seatpost 1x cable housing 1600mm 1x inner wire 1800mm 1x cable barrel 2x housing endcap 1x cable crimp 1x air valve adapter 1x Quick-Reset-Lever 4x 5mm travel adjust spacer 1x remote (optional) Dropper Remote Sold Separately Bike Yoke Revive 3 Dropper Seatpost Dropper Seatpost UPC: 4713291522798

by Bike Yoke

—$350

Mechanical Ain't Dead Dropper Remote Sold Separately The new REVIVE 3.0 is the latest evolution of our flagship model, benefitting from already very successful 10 years of experience with its predecessors. We didn't touch anything proven, and so the famed reliable and buttery smooth hydraulic system remains untouched, yet we have succeeded in making our multiple award-winner even better. The most important features and highlights of REVIVE 3.0 include: new saddle clamps for a 5mm lower stack height a new 360° rotatable foot unit shortens the overall length of the seat post by further 10 mm new slide-on cable barrel for easier installation new BikeYoke cables (3mm housing + 0.9mm polished and coated stainless wire) travel reduction in 5mm increments (4x5mm spacer included) 3D-forged, one-piece upper tube for increased stiffness and strength redesigned actuation linkage for imprived feel and feedback two-piece saddle bolts with integrated conical washers for easier saddle mounting The Revive 3.0 is available in four different lengths, all of which allowing for infinitely adjustable drop. Its extremely short stack height helps to maximize the drop on your bike. The low overall weight and the unrivaled smoothness, even under cold temperatures, should also be highlighted. If you are right in between two sizes, you may opt for the longer one, as the drop, and thus the overall length of the post can be reduced using 5mm spacers. This allows you to get the most of the available drop without the need to opt for a shorter version. Although all our remotes will work with the REVIVE THREE, we recommend our Triggy Alpha long for light and defined, actuation due to its longer paddle. REVIVE 3.0 includes 1x REVIVE THREE seatpost 1x cable housing 1600mm 1x inner wire 1800mm 1x cable barrel 2x housing endcap 1x cable crimp 1x air valve adapter 1x Quick-Reset-Lever 4x 5mm travel adjust spacer 1x remote (optional) Dropper Remote Sold Separately Bike Yoke Revive 3 Dropper Seatpost Dropper Seatpost UPC: 4713291522750

by Bike Yoke

—$39

BikeYoke Shifty Shifty is a small but extremely effective little device for your SRAM 1x11 or 1x12 rear derailleur. Particularly when riding in wet and muddy conditions, we found out, that SRAM rear derailleurs lack shifting accuracy, due to the fact that the original pulley rotates with its plastic body on a steel axle. The pulley experiences extensive friction, when dirt, water or mud come into play and causes lack of precision or even "ghost-shifting" because the rear derailleur is not able to react smoothly to the trigger's action since the shifting cable cannot move freely. BikeYoke Shifty features an anodized 6061-T6 aluminum body, which encloses a stainless steel bearing for ultra-low friction, even when playing in the dirt. Features Shifty replaces the original plastic cable pulley wheel with an aluminum pulley, featuring a sealed (2RS) stainless steel bearing to ensure free rotation even when riding in muddy conditions. 1x Shifty pulley - 6061-T6 aluminium, anodized, ball bearings 1x axle for mounting 1x bolt for mounting Shifty is compatible with: XX1 11 Speed X01 11 Speed GX1 11 Speed NX1 11 Speed X1 11 Speed EX 11 Speed XX1 Eagle 12 Speed X01 Eagle 12 Speed GX Eagle 12 Speed NX Eagle 12 Speed X01 DH 7 Speed V2 now compatible with the T-Type as well as the following SRAM 1x12 rear derailleurs: X01, XX1 *On these rear derailleurs, the original rivet of the pulley must be removed and replaced with the bolt kit supplied with the Shifty. Installation Instructions Shifty Installation Bike Yoke Shifty Pulley Assembly UPC: 4713291523412

by Bike Yoke

—$39

BikeYoke Shifty Shifty is a small but extremely effective little device for your SRAM 1x11 or 1x12 rear derailleur. Particularly when riding in wet and muddy conditions, we found out, that SRAM rear derailleurs lack shifting accuracy, due to the fact that the original pulley rotates with its plastic body on a steel axle. The pulley experiences extensive friction, when dirt, water or mud come into play and causes lack of precision or even "ghost-shifting" because the rear derailleur is not able to react smoothly to the trigger's action since the shifting cable cannot move freely. BikeYoke Shifty features an anodized 6061-T6 aluminum body, which encloses a stainless steel bearing for ultra-low friction, even when playing in the dirt. Features Shifty replaces the original plastic cable pulley wheel with an aluminum pulley, featuring a sealed (2RS) stainless steel bearing to ensure free rotation even when riding in muddy conditions. 1x Shifty pulley - 6061-T6 aluminium, anodized, ball bearings 1x axle for mounting 1x bolt for mounting Shifty is compatible with: XX1 11 Speed X01 11 Speed GX1 11 Speed NX1 11 Speed X1 11 Speed EX 11 Speed XX1 Eagle 12 Speed X01 Eagle 12 Speed GX Eagle 12 Speed NX Eagle 12 Speed X01 DH 7 Speed V2 now compatible with the T-Type as well as the following SRAM 1x12 rear derailleurs: X01, XX1 *On these rear derailleurs, the original rivet of the pulley must be removed and replaced with the bolt kit supplied with the Shifty. Installation Instructions Shifty Installation Bike Yoke Shifty V2 Pulley Assembly UPC: 4713291523375

by Bike Yoke

—$400

Mechanical Ain't Dead Dropper Remote Sold Separately The new REVIVE 3.0 is the latest evolution of our flagship model, benefitting from already very successful 10 years of experience with its predecessors. We didn't touch anything proven, and so the famed reliable and buttery smooth hydraulic system remains untouched, yet we have succeeded in making our multiple award-winner even better. The most important features and highlights of REVIVE 3.0 include: new saddle clamps for a 5mm lower stack height a new 360° rotatable foot unit shortens the overall length of the seat post by further 10 mm new slide-on cable barrel for easier installation new BikeYoke cables (3mm housing + 0.9mm polished and coated stainless wire) travel reduction in 5mm increments (4x5mm spacer included) 3D-forged, one-piece upper tube for increased stiffness and strength redesigned actuation linkage for imprived feel and feedback two-piece saddle bolts with integrated conical washers for easier saddle mounting The Revive 3.0 is available in four different lengths, all of which allowing for infinitely adjustable drop. Its extremely short stack height helps to maximize the drop on your bike. The low overall weight and the unrivaled smoothness, even under cold temperatures, should also be highlighted. If you are right in between two sizes, you may opt for the longer one, as the drop, and thus the overall length of the post can be reduced using 5mm spacers. This allows you to get the most of the available drop without the need to opt for a shorter version. Although all our remotes will work with the REVIVE THREE, we recommend our Triggy Alpha long for light and defined, actuation due to its longer paddle. REVIVE 3.0 includes 1x REVIVE THREE seatpost 1x cable housing 1600mm 1x inner wire 1800mm 1x cable barrel 2x housing endcap 1x cable crimp 1x air valve adapter 1x Quick-Reset-Lever 4x 5mm travel adjust spacer 1x remote (optional) Dropper Remote Sold Separately Bike Yoke Revive 3 Dropper Seatpost Dropper Seatpost UPC: 4713291522781

by Bike Yoke

—$380

Mechanical Ain't Dead Dropper Remote Sold Separately The new REVIVE 3.0 is the latest evolution of our flagship model, benefitting from already very successful 10 years of experience with its predecessors. We didn't touch anything proven, and so the famed reliable and buttery smooth hydraulic system remains untouched, yet we have succeeded in making our multiple award-winner even better. The most important features and highlights of REVIVE 3.0 include: new saddle clamps for a 5mm lower stack height a new 360° rotatable foot unit shortens the overall length of the seat post by further 10 mm new slide-on cable barrel for easier installation new BikeYoke cables (3mm housing + 0.9mm polished and coated stainless wire) travel reduction in 5mm increments (4x5mm spacer included) 3D-forged, one-piece upper tube for increased stiffness and strength redesigned actuation linkage for imprived feel and feedback two-piece saddle bolts with integrated conical washers for easier saddle mounting The Revive 3.0 is available in four different lengths, all of which allowing for infinitely adjustable drop. Its extremely short stack height helps to maximize the drop on your bike. The low overall weight and the unrivaled smoothness, even under cold temperatures, should also be highlighted. If you are right in between two sizes, you may opt for the longer one, as the drop, and thus the overall length of the post can be reduced using 5mm spacers. This allows you to get the most of the available drop without the need to opt for a shorter version. Although all our remotes will work with the REVIVE THREE, we recommend our Triggy Alpha long for light and defined, actuation due to its longer paddle. REVIVE 3.0 includes 1x REVIVE THREE seatpost 1x cable housing 1600mm 1x inner wire 1800mm 1x cable barrel 2x housing endcap 1x cable crimp 1x air valve adapter 1x Quick-Reset-Lever 4x 5mm travel adjust spacer 1x remote (optional) Dropper Remote Sold Separately Bike Yoke Revive 3 Dropper Seatpost Dropper Seatpost UPC: 4713291522767

by Bike Yoke

—$39

BikeYoke Shifty Shifty is a small but extremely effective little device for your SRAM 1x11 or 1x12 rear derailleur. Particularly when riding in wet and muddy conditions, we found out, that SRAM rear derailleurs lack shifting accuracy, due to the fact that the original pulley rotates with its plastic body on a steel axle. The pulley experiences extensive friction, when dirt, water or mud come into play and causes lack of precision or even "ghost-shifting" because the rear derailleur is not able to react smoothly to the trigger's action since the shifting cable cannot move freely. BikeYoke Shifty features an anodized 6061-T6 aluminum body, which encloses a stainless steel bearing for ultra-low friction, even when playing in the dirt. Features Shifty replaces the original plastic cable pulley wheel with an aluminum pulley, featuring a sealed (2RS) stainless steel bearing to ensure free rotation even when riding in muddy conditions. 1x Shifty pulley - 6061-T6 aluminium, anodized, ball bearings 1x axle for mounting 1x bolt for mounting Shifty is compatible with: XX1 11 Speed X01 11 Speed GX1 11 Speed NX1 11 Speed X1 11 Speed EX 11 Speed XX1 Eagle 12 Speed X01 Eagle 12 Speed GX Eagle 12 Speed NX Eagle 12 Speed X01 DH 7 Speed V2 now compatible with the T-Type as well as the following SRAM 1x12 rear derailleurs: X01, XX1 *On these rear derailleurs, the original rivet of the pulley must be removed and replaced with the bolt kit supplied with the Shifty. Installation Instructions Shifty Installation Bike Yoke Shifty Pulley Assembly UPC: 4713291523368

by Bike Yoke

—$350

Mechanical Ain't Dead Dropper Remote Sold Separately The new REVIVE 3.0 is the latest evolution of our flagship model, benefitting from already very successful 10 years of experience with its predecessors. We didn't touch anything proven, and so the famed reliable and buttery smooth hydraulic system remains untouched, yet we have succeeded in making our multiple award-winner even better. The most important features and highlights of REVIVE 3.0 include: new saddle clamps for a 5mm lower stack height a new 360° rotatable foot unit shortens the overall length of the seat post by further 10 mm new slide-on cable barrel for easier installation new BikeYoke cables (3mm housing + 0.9mm polished and coated stainless wire) travel reduction in 5mm increments (4x5mm spacer included) 3D-forged, one-piece upper tube for increased stiffness and strength redesigned actuation linkage for imprived feel and feedback two-piece saddle bolts with integrated conical washers for easier saddle mounting The Revive 3.0 is available in four different lengths, all of which allowing for infinitely adjustable drop. Its extremely short stack height helps to maximize the drop on your bike. The low overall weight and the unrivaled smoothness, even under cold temperatures, should also be highlighted. If you are right in between two sizes, you may opt for the longer one, as the drop, and thus the overall length of the post can be reduced using 5mm spacers. This allows you to get the most of the available drop without the need to opt for a shorter version. Although all our remotes will work with the REVIVE THREE, we recommend our Triggy Alpha long for light and defined, actuation due to its longer paddle. REVIVE 3.0 includes 1x REVIVE THREE seatpost 1x cable housing 1600mm 1x inner wire 1800mm 1x cable barrel 2x housing endcap 1x cable crimp 1x air valve adapter 1x Quick-Reset-Lever 4x 5mm travel adjust spacer 1x remote (optional) Dropper Remote Sold Separately Bike Yoke Revive 3 Dropper Seatpost Dropper Seatpost UPC: 4713291522736

by Bike Yoke

—$350

Mechanical Ain't Dead Dropper Remote Sold Separately The new REVIVE 3.0 is the latest evolution of our flagship model, benefitting from already very successful 10 years of experience with its predecessors. We didn't touch anything proven, and so the famed reliable and buttery smooth hydraulic system remains untouched, yet we have succeeded in making our multiple award-winner even better. The most important features and highlights of REVIVE 3.0 include: new saddle clamps for a 5mm lower stack height a new 360° rotatable foot unit shortens the overall length of the seat post by further 10 mm new slide-on cable barrel for easier installation new BikeYoke cables (3mm housing + 0.9mm polished and coated stainless wire) travel reduction in 5mm increments (4x5mm spacer included) 3D-forged, one-piece upper tube for increased stiffness and strength redesigned actuation linkage for imprived feel and feedback two-piece saddle bolts with integrated conical washers for easier saddle mounting The Revive 3.0 is available in four different lengths, all of which allowing for infinitely adjustable drop. Its extremely short stack height helps to maximize the drop on your bike. The low overall weight and the unrivaled smoothness, even under cold temperatures, should also be highlighted. If you are right in between two sizes, you may opt for the longer one, as the drop, and thus the overall length of the post can be reduced using 5mm spacers. This allows you to get the most of the available drop without the need to opt for a shorter version. Although all our remotes will work with the REVIVE THREE, we recommend our Triggy Alpha long for light and defined, actuation due to its longer paddle. REVIVE 3.0 includes 1x REVIVE THREE seatpost 1x cable housing 1600mm 1x inner wire 1800mm 1x cable barrel 2x housing endcap 1x cable crimp 1x air valve adapter 1x Quick-Reset-Lever 4x 5mm travel adjust spacer 1x remote (optional) Dropper Remote Sold Separately Bike Yoke Revive 3 Dropper Seatpost Dropper Seatpost UPC: 4713291522729

by Bike Yoke