https://www.worldwidecyclery.com/products/bike-yoke-dehy-kit-for-a1-a2-rockshox-reverbs168635531269Bike Yoke DeHy Kit for A1/A2 Rockshox Reverbs//cdn.shopify.com/s/files/1/0349/7357/products/yb1001_large.jpg?v=1543852324//cdn.shopify.com/s/files/1/0349/7357/products/yb1001_medium.jpg?v=154385232499.00USDInStockDropper Seatpost PartAllAll.Bike YokeComponentsDisOkDropper Seatpost PartSeatpostsSeatposts and Clamps
Bike Yoke DeHy Kit for A1/A2 Rockshox Reverbs
DeHy A1/A2 complete kit contains:
1x full CNC aluminium DeHy assembly unit for Reverb Stealth A1/A2
1x Triggy front feed, or 2-by Remote Hebel
1x Splits-clamp oder optional I-Spec Adapter (when choosing Triggy)
1x outer housing 1500mm
1x inner cable 1700mm
2x endcap for outer housing
1x squeeze endcap for inner cable
1x barrel cable clamp for inner wire
DeHy A1/A2 Kit allows you to optimize ergonomics and reliability of your Reverb Stealth, by replacing the bulky original hydraulic remote with our wire-actuating Triggy or 2-by Remote.
If you do not have a front derailleur then you should choose our Triggy remote which sits in place of a regular front derailleur shifter, neatly positioned underneath the handlebar - well protected from impacts due to crash, or when the bike falls over. It provides perfect modulation of return speed, which is controlled by lever push without the need of taking your hands off the bar. The original remote often requires to change grip, when installed above handlebar and provides bad ergonomics. Triggy can not only be installed with our clever "Splits" clamp to the handlebar, but also directly bolts on to SRAM Matchmaker, Magura Shiftmix, Formula Mixmaster or Hope Shifter Mount brake levers to save an extra clamp and clean up you cockpit. Using our optional I-Spec adapters you can mate your Triggy directly with Shimano I-Spec B or I-Spec II brake levers.
If you are still running your bike with a front derailleur, you should go with our 2-by Remote. This Remote can be either attached to the right or left side of the handlebar for optimal positioning. Featuring our integrated "Splits" clamp you can install the 2-by Remote to the handlebar without te need of taking off your grips or brake levers, since you just snap it over the handlebars.
DeHy A1/A2 is compatible with all Reverb Stealth versions of model years (MY) 2011-2016. Please note, that deliveries of MY 2017 Reverbs (B1 versions) already started in 2016, so you must not go by the date of purchase to determine, which version you have. You can easily spot which version you have, by a look at your upper tube (stanchion). A1/A2 versions have a completely black stanchion, whereas B1 versions have a golden or silver "ROCKSHOX" logo on the upper tube, right underneath the seatpost´s head (see picture below). A1/A2 version do not have a logo there.
Installation is fairly easy, since it does not require any opening of the post´s internal hydraulics. You simply need to take off the original hydrulic hose and replace the lower unit wih our DeHy assembly and install the shift cable and remote for actuation. You should be able to do that in leass than 10 minutes.
Another benefit is the availability and pricing of spare parts. In case of a damaged or ripped cable after a crash, you can easily find a shift cable and outer housing in basically any local bikeshop nearby, whereas it is going to be hard to find immediate replacement of the original hydraulic hose and fittings.
Compared to the original "Connectamajic" quick-connect hose, our DeHy saves quite some build height, which can be very useful in many cases to get some extra seatpost insertion into the seat tube.
You will never have to bleed you original hydraulic remote hose again, once you go by wire actuation.
Bike Yoke Dropper Seatpost Part EAN: 4713291520152Bike Yokebike-yokeDisOkdropper-seatpost-partadd-to-cart2018-12-03