—$81.95
Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 3mm offset is designed for boost cranksets (52mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 32 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719025621
Mpn: OVAL-SDM32-BSTby Wolf Tooth
—$81.95
Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 3mm offset is designed for boost cranksets (52mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 30 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719025614
Mpn: OVAL-SDM30-BSTby Wolf Tooth
—$24.95
These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner. 6mm length Made in the US out of 7075-T6 Aluminum Has hex heads on both the bolt and nut for easy installation Max torque of 7-8 Nm with light grease on threads only Item Specifications Color Black keyword search Wolf Tooth Chainring Bolt Length 6 Material Aluminum Type Hex Wolf Tooth 1x Chainring Bolt Sets Chainring Bolt UPC: 812719020404
Mpn: 4CBCN06BLKby Wolf Tooth
—$81.95
Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 52mm chainline / 3mm offset for boost spacing Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 32 Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719025522
Mpn: OVAL-RFC32-BSTby Wolf Tooth
—$23.03
The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. 10-42 setup not supported Works with all 10-11 speed Shimano and SRAM Road Derailleurs The RoadLink is optimized for use with ten or eleven-speed 11-36t, 11-40t and 11-42t cassettes Best used with Single or Double Setups - see manufacturer's site for more details Wolf Tooth Roadlink Miscellaneous Rear Derailleur Part UPC: 812719021869
Mpn: RLINKby Wolf Tooth
—$20.93
These bolts are designed as a direct fit for 30 Tooth x 104 BCD threaded chainring. These are alloy bolts with 4mm hex heads and 10mm length. Designed for M8 x .75 thread pitch 10mm long 4mm hex head Bolt length is laser engraved onto the bolt head for easy length identification 6-7 Nm installation torque with light grease on threads only Item Specifications Color Black Length 10 Material Aluminum Type Hex Wolf Tooth 30T Alloy Chainring Bolts Chainring Bolt UPC: 812719020374
Mpn: 4CB10BLKby Wolf Tooth
—$8.25
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.M4 x 24mm screw for that extra little push Wolf Tooth Extended B-Limit Screw Miscellaneous Rear Derailleur Part UPC: 812719020152
Mpn: BSCREW25by Wolf Tooth
—$81.95
Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 52mm chainline / 3mm offset for boost spacing Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 30 Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719025515
Mpn: OVAL-RFC30-BSTby Wolf Tooth
—$29.95
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain. Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs Double chainrings are not currently supported Triple chainrings are not supported Direct Mount-native frames and SRAM derailleurs are not supported Wolf Tooth GoatLink Rear Derailleur Adaptor Miscellaneous Rear Derailleur Part UPC: 812719021937
Mpn: 11S44-GLINKby Wolf Tooth
—$81.95
Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 3mm offset is designed for boost cranksets (52mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 28 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719025607
Mpn: OVAL-SDM28-BSTby Wolf Tooth
—$76.95
Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 3mm offset is designed for boost cranksets (52mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Chainring BCD Sram Direct Mount Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 30 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719025584
Mpn: SDM30-BSTby Wolf Tooth
—$76.95
Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. Chainline is 49mm Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings Not compatible with 9 speed chains If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainline/Hub Compatibility 170/177 Hubs Chainline/Hub Compatibility 190/197 Hubs Chainring BCD Direct Mount CINCH Color Black Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 32 Wolf Tooth RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719020923
Mpn: RFC32by Wolf Tooth
—$76.95
Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 3mm offset is designed for boost cranksets (52mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Chainring BCD Sram Direct Mount Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 32 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719025591
Mpn: SDM32-BSTby Wolf Tooth
—$29.95
CAMO Spider Designed for 52mm chainline long BB30 cranks and GXP cranks Made from Aluminum alloy for light weight Includes 5 black chainring bolts Wolf Tooth CAMO Crank Spider UPC: 812719023399
Mpn: SP-CAMO-SDM-M5by Wolf Tooth
—$76.95
Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 3mm offset is designed for boost cranksets (52mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Chainring BCD Sram Direct Mount Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 28 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719025577
Mpn: SDM28-BSTby Wolf Tooth
—$76.95
Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. Made from 7075 Aluminum for long life Not compatible with 9 speed chains Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Optimized for use with 10, 11, and 12 speed chains Chainline is 49mm Item Specifications Material Aluminum Offset 6 Defined Color Black Ring Position/TYPE Chain Retaining Single Ring Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Tooth Count 30 Direct Mount Type Direct Mount CINCH Round or Oval Round Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainline/Hub Compatibility 170/177 Hubs Chainline/Hub Compatibility 190/197 Hubs Wolf Tooth RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719020916
Mpn: RFC30by Wolf Tooth
—$86.95
This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. Compatible only with Hyperglide+ 12-speed chains For use with Shimano XTR M9100 series cranksets Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention Prevents premature ring and chain wear that can come from non-optimized profiles Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount Shimano Drivetrain Speeds 12 keyword search Hyperglide Plus Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 32 Wolf Tooth Elliptical Shimano Hyperglide+ Direct Mount Chainrings Direct Mount Chainrings UPC: 810006800654
Mpn: OVAL-SHDM32-SH12by Wolf Tooth
—$81.95
Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 49mm chainline / 6mm offset for standard spacing Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainline/Hub Compatibility 170/177 Hubs Chainline/Hub Compatibility 190/197 Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 30 Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719021814
Mpn: OVAL-RFC30by Wolf Tooth
—$79.95
These Wolf Tooth Elliptical Direct Mount Chainrings are designed to work with Cane Creek eeWings cranksets and SRAM direct mount cranksets with a 3-bolt interface. The proprietary Powertrac design has an ovality of 10% and a timing of 112 degrees after top dead center, providing benefits such as greater rear wheel traction. The tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain. Nickel plated chainrings are designed to be compatible with Cane Creek eeWings cranksets Compatible with Shimano 12-speed Hyperglide+ chains on bikes with boost and non-boost spacing Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Silver Direct Mount Type Direct Mount SRAM Drivetrain Speeds 12 Material Aluminum Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 32 Wolf Tooth Elliptical 3-Bolt Direct Mount Chainring for Hyperglide+ Chain Direct Mount Chainrings UPC: 810006801774
Mpn: OVAL-SDM32-BST-NI-SH12by Wolf Tooth
—$64.95
Designed to fit 94 BCD 4-Bolt cranks such as the SRAM X1 crank, these rings will provide maximal chain retention and minimal noise. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life 49mm chainline Use of a clutch-style rear derailleur is recommended Item Specifications Chainring BCD 94 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Ring Position/Type Chain Retaining Single Ring Tooth Count 32 Wolf Tooth 94 BCD 4-Bolt Chainrings Chainring UPC: 810006800333
Mpn: SR4-9432by Wolf Tooth
—$79.95
This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. Compatible only with Hyperglide+ chains For use with Shimano XTR M9100 series cranksets Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention Prevents premature ring and chain wear that can come from non-optimized profiles Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount Shimano Drivetrain Speeds 12 Material Alloy Offset 3 Round or Oval Round Tooth Count 30 Wolf Tooth Shimano Hyperglide+ Direct Mount Chainrings Direct Mount Chainrings UPC: 810006800692
Mpn: SHDM30-BST-SH12by Wolf Tooth
—$71.95
Designed for 104 BCD Mountain Cranksets. The proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the benefits of an oval ring without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life These rings are threaded, use with 10mm chainring bolts 48mm - 50mm chainline depending on the crankset Item Specifications Chainring BCD 104 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Ring Position/Type Chain Retaining Single Ring Tooth Count 32 Wolf Tooth Elliptical 104 BCD Chainrings Chainring UPC: 812719021548
Mpn: OVAL10432by Wolf Tooth
—$81.95
Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 49mm chainline / 6mm offset for standard spacing Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainline/Hub Compatibility 170/177 Hubs Chainline/Hub Compatibility 190/197 Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 32 Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719021821
Mpn: OVAL-RFC32by Wolf Tooth
—$69.95
If you are a 1x rider and can't afford to drop a chain, the Wolf Tooth GnarWolf chain guide is for you. Designed specifically around 1x wide/narrow chainrings the GnarWolf will keep your chain glued to your chainring in the roughest and muddiest of conditions. Designed for use with round chainrings 28t-36t or oval chainrings 28t-34 on bikes with an ISCG-05 Mount Infinite vertical adjustment between 28t and 36t for round chainrings and 28t-34t oval chainrings Due to frame and bike geometry there will be some bikes that need modifications or flat out won't work - Here are the known exceptions: Ibis Mojo 3 (will not work), Ibis Ripmo (will not work), Ibis Ripley (will not work), Specialized Stumpjumper 2016-2017 models (works with 1mm of spacers between the frames ISCG05 mounts and the guide, washers not included), Evil The Following (will not work), Santa Cruz Tallboy (will not work) 8mm of chainline adjustment via Wolf Tooth's GuideLock quick adjustment system (No shims required) Specific guide shaping is optimized for use with elliptical and round chainrings Installation only takes a few minutes and all adjustments made easily with common 4 mm hex key Easy chain removal without losing any of the guide's adjustments Guide is designed for 1x use only and NOT compatible with crankset mounted bashrings Item Specifications Chainguide Mount Type ISCG-05 Color Black Defined Color Black Max Tooth (teeth) 36 Wolf Tooth Gnarwolf Chain Guides Chain Retention System UPC: 812719023009
Mpn: GNARWOLF-ISCG05by Wolf Tooth
—$81.95
Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 6mm offset designed for use with cyclocross and road cranksets (47mm chainline) or GXP and long spindle BB30 cranksets (49mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 170/177 Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 28 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719022231
Mpn: OVAL-SDM28by Wolf Tooth
—$24.95
These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner. 6mm length Made in the US out of 7075-T6 Aluminum Has hex heads on both the bolt and nut for easy installation Max torque of 7-8 Nm with light grease on threads only Item Specifications Color Blue keyword search Wolf Tooth Chainring Bolt Length 6 Material Aluminum Type Hex Wolf Tooth 1x Chainring Bolt Sets Chainring Bolt UPC: 812719020411
Mpn: 4CBCN06BLUby Wolf Tooth
—$81.95
Designed to fit 4-arm 96 Asymmetric BCD XT M8000 Cranks. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. Not compatible with XTR9000 series cranksets The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075 Aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainring BCD 96 Shimano Asymmetric Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Ring Position/Type Chain Retaining Single Ring Tooth Count 32 Wolf Tooth Elliptical 96 Asymmetrical BCD Chainrings for Shimano XT M8000/SLX M7000 Chainring UPC: 812719022415
Mpn: OVAL-M8K-32by Wolf Tooth
—$29.95
These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner. 6mm length Made in the US out of 7075-T6 Aluminum Has hex heads on both the bolt and nut for easy installation Max torque of 7-8 Nm with light grease on threads only Item Specifications Color Black keyword search Wolf Tooth Chainring Bolt Length 6 Material Aluminum Type Hex Wolf Tooth 1x Chainring Bolt Sets Chainring Bolt UPC: 812719020435
Mpn: 5CBCN06BLKby Wolf Tooth
—$76.95
Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 3mm offset is designed for boost cranksets (52mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 34 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719026192
Mpn: OVAL-SDM34-BSTby Wolf Tooth
—$76.95
Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. Chainline is 52mm Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings Not compatible with 9 speed chains If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Chainring BCD Direct Mount CINCH Color Black Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 3 Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 30 Wolf Tooth RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719025485
Mpn: RFC30-BSTby Wolf Tooth
—$39.95
If you like the rough stuff, log hopping, bouldering on your bike or occasionally like to see if you can break your bike on the gnarlies, protect that Wolf Tooth 104 or 64 BCD ring with one of these properly sized bashes. Only fits cranksets with an outside "big ring" mounting position - they do not fit cranks without a dedicated flat surface for an outside ring Use 8mm chainring bolts if mounting your chainring in the middle position, utilize 6mm bolts if utilizing a 64 BCD ring If utilizing a 30T Wolf Tooth ring, use 10mm length bolts with the head of the bolt on the inside to provide clearance for the chain Item Specifications Chainring BCD 104 Color Black Defined Color Black Material Aluminum Max Tooth (teeth) 34 Mount Type Chainring Wolf Tooth Alloy Bashguard 104 BCD Chainring Guard UPC: 812719021364
Mpn: BR104-3234by Wolf Tooth
—$69.95
The Wolf Tooth 76 BCD chainrings fit any SRAM 76 BCD spider or Specialized Stout crankset. Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Item Specifications Chainring BCD 76 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Ring Position/Type Chain Retaining Single Ring Tooth Count 32 Wolf Tooth 76 BCD Chainrings Chainring UPC: 812719025447
Mpn: 7632by Wolf Tooth
—$24.95
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain. Improves chain wrap and reduces premature shifting degradation by replacing the Direct Mount link from compatible Shimano ten-speed rear derailleurs Compatible with 2013 or later Shimano 10-speed Shadow Plus rear derailleurs that use the 8mm Direct Mount intermediate link whose link is 7.9 - 8.1mm thick Does not work with direct mount native frames or SRAM rear derailleurs The fastest route to improved wear and long-term shifting performance on wide-range 1x10 drivetrains that utilize Shimano Shadow Plus derailleurs Stainless Steel mounting hardware included 8-10NM tightening torque Wolf Tooth GoatLink Rear Derailleur Adaptor Miscellaneous Rear Derailleur Part UPC: 812719021371
Mpn: 10S-GLINKby Wolf Tooth
—$81.95
Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 6mm offset designed for use with cyclocross and road cranksets (47mm chainline) or GXP and long spindle BB30 cranksets (49mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 170/177 Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 32 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719021524
Mpn: OVAL-SDM32by Wolf Tooth
—$69.95
The Wolf Tooth 76 BCD chainrings fit any SRAM 76 BCD spider or Specialized Stout crankset. Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Item Specifications Chainring BCD 76 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Ring Position/Type Chain Retaining Single Ring Tooth Count 30 Wolf Tooth 76 BCD Chainrings Chainring UPC: 812719025430
Mpn: 7630by Wolf Tooth
—$79.95
Designed to fit Shimano 4-arm 96 Asymmetric BCD XT M8000, SLX M7000, or Deore M6000 1x or 2x cranksets. These rings feature Drop-Stop tooth profiles for mud clearance, chain retention and durability. Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075 Aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainring BCD 96 Shimano Asymmetric Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Ring Position/Type Chain Retaining Single Ring Tooth Count 30 Wolf Tooth Shimano XT 8000 / SLX 7000 96 Asymmetrical BCD Chainrings Chainring UPC: 812719021876
Mpn: XTM8K9630by Wolf Tooth
—$64.95
Designed to fit 94 BCD 4-Bolt cranks such as the SRAM X1 crank, these rings will provide maximal chain retention and minimal noise. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life 49mm chainline Use of a clutch-style rear derailleur is recommended Item Specifications Chainring BCD 94 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Ring Position/Type Chain Retaining Single Ring Tooth Count 30 Wolf Tooth 94 BCD 4-Bolt Chainrings Chainring UPC: 810006800340
Mpn: SR4-9430by Wolf Tooth
—$84.95
Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainring BCD Sram Direct Mount Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 40 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 810006801156
Mpn: SDM40-FTby Wolf Tooth
—$79.95
This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. Compatible only with Hyperglide+ chains For use with Shimano XTR M9100 series cranksets Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention Prevents premature ring and chain wear that can come from non-optimized profiles Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount Shimano Drivetrain Speeds 12 Material Alloy Offset 3 Round or Oval Round Tooth Count 32 Wolf Tooth Shimano Hyperglide+ Direct Mount Chainrings Direct Mount Chainrings UPC: 810006800708
Mpn: SHDM32-BST-SH12by Wolf Tooth
—$69.95
If you are a 1x rider and can't afford to drop a chain, the Wolf Tooth GnarWolf chain guide is for you. Designed specifically around 1x wide/narrow chainrings the GnarWolf will keep your chain glued to your chainring in the roughest and muddiest of conditions. Designed for use with round and oval 34t-46t chainrings on bikes with an Integral Braze-On Mount Infinite vertical adjustment between 34t and 46t for round and oval chainrings Accommodate chainlines from approx. 45mm to 51mm 8mm of chainline adjustment via Wolf Tooth's GuideLock quick adjustment system (No shims required) Specific guide shaping is optimized for use with elliptical and round chainrings Installation only takes a few minutes and all adjustments made easily with common 4 mm hex key Easy chain removal without losing any of the guide's adjustments Guide is designed for 1x use only and NOT compatible with crankset mounted bashrings Item Specifications Chainguide Mount Type Braze-on Color Black Defined Color Black Max Tooth (teeth) 46 Wolf Tooth Gnarwolf Chain Guides Chain Retention System UPC: 812719023047
Mpn: GNARWOLF-BRAZEby Wolf Tooth
—$81.95
Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. 49mm chainline / 6mm offset for standard spacing Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 157 Super Boost Hubs Chainline/Hub Compatibility 170/177 Hubs Chainline/Hub Compatibility 190/197 Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 28 Wolf Tooth Elliptical RaceFace / Easton CINCH Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 812719022224
Mpn: OVAL-RFC28by Wolf Tooth
—$20.93
These bolts are designed as a direct fit for 30 Tooth x 104 BCD threaded chainring. These are alloy bolts with 4mm hex heads and 10mm length. Designed for M8 x .75 thread pitch 10mm long 4mm hex head Bolt length is laser engraved onto the bolt head for easy length identification 6-7 Nm installation torque with light grease on threads only Item Specifications Color Red Length 10 Material Aluminum Type Hex Wolf Tooth 30T Alloy Chainring Bolts Chainring Bolt UPC: 812719020398
Mpn: 4CB10REDby Wolf Tooth
—$24.95
These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner. 6mm length Made in the US out of 7075-T6 Aluminum Has hex heads on both the bolt and nut for easy installation Max torque of 7-8 Nm with light grease on threads only Item Specifications Color Red keyword search Wolf Tooth Chainring Bolt Length 6 Material Aluminum Type Hex Wolf Tooth 1x Chainring Bolt Sets Chainring Bolt UPC: 812719020428
Mpn: 4CBCN06REDby Wolf Tooth
—$49.95
Light, strong with extra tall teeth, the Wolf Tooth Aluminum Single Speed Cog is a lightweight option for single speed cogs that's offered in a variety of sizes. Wide 4.5mm base won't dig into your freehub Made of 7075 Aluminum Alloy for durability and lightness Made in the USA Item Specifications Cassette Body Type Shimano/SRAM 8, 9, 10 Speed Defined Color Black Drivetrain Speeds Single Speed 3/32" Material Aluminum Tooth Count 20 Wolf Tooth Alloy Singlespeed Cog Driver and Single Cog UPC: 812719020848
Mpn: AL-SS-COG20by Wolf Tooth
—$76.95
Direct mount rings designed for use with SRAM cranks that utilize their 3-bolt mounting style. This premium 7075-T6 Aluminum Alloy chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 6mm offset designed for use with cyclocross and road cranksets (47mm chainline) or GXP and long spindle BB30 cranksets (49mm chainline) Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM 8-bolt interface Made from premium 7075-T6 aluminum for durability and weight savings Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 170/177 Hubs Chainring BCD Sram Direct Mount Color Black Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Round Tooth Count 26 Wolf Tooth SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719020688
Mpn: ASM5-SDM26by Wolf Tooth
—$81.95
Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. 6mm offset designed for use with cyclocross and road cranksets (47mm chainline) or GXP and long spindle BB30 cranksets (49mm chainline) Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Not compatible with the SRAM RED and Force AXS 8-bolt interface Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainline/Hub Compatibility 135/142 MTB Hubs Chainline/Hub Compatibility 150/157 DH Hubs Chainline/Hub Compatibility 170/177 Hubs Defined Color Black Direct Mount Type Direct Mount SRAM Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Offset 6 Ring Position/Type Chain Retaining Single Ring Round or Oval Oval Tooth Count 30 Wolf Tooth PowerTrac Elliptical SRAM 3-Bolt Direct Mount Chainrings Direct Mount Chainrings UPC: 812719021517
Mpn: OVAL-SDM30by Wolf Tooth
—$81.95
Designed to fit 4-arm 96 Asymmetric BCD XT M8000 Cranks. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075 Aluminum for long life Use of a clutch-style rear derailleur is recommended Item Specifications Chainring BCD 96 Shimano Asymmetric Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Ring Position/Type Chain Retaining Single Ring Tooth Count 30 Wolf Tooth Elliptical 96 Asymmetrical BCD Chainrings for Shimano XT M8000/SLX M7000 Chainring UPC: 812719022408
Mpn: OVAL-M8K-30by Wolf Tooth
—$39.95
If you like the rough stuff, log hopping, bouldering on your bike or occasionally like to see if you can break your bike on the gnarlies, protect that Wolf Tooth 104 or 64 BCD ring with one of these properly sized bashes. Only fits cranksets with an outside "big ring" mounting position - they do not fit cranks without a dedicated flat surface for an outside ring Use 8mm chainring bolts if mounting your chainring in the middle position, utilize 6mm bolts if utilizing a 64 BCD ring If utilizing a 30T Wolf Tooth ring, use 10mm length bolts with the head of the bolt on the inside to provide clearance for the chain Item Specifications Chainring BCD 104 Color Black Defined Color Black Material Aluminum Max Tooth (teeth) 30 Mount Type Chainring Wolf Tooth Alloy Bashguard 104 BCD Chainring Guard UPC: 812719021357
Mpn: BR104-2630by Wolf Tooth
—$86.95
This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. Elliptical rings provide smoother, more efficient pedal rotation, which means better traction Compatible only with Hyperglide+ 12-speed chains For use with any RaceFace CINCH crankset Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention Prevents premature ring and chain wear that can come from non-optimized profiles Item Specifications Chainline/Hub Compatibility 141/148 Boost Hubs Defined Color Black Direct Mount Type Direct Mount CINCH Drivetrain Speeds 12 keyword search Hyperglide Plus Material Alloy Offset 3 Round or Oval Oval Tooth Count 30 Wolf Tooth Elliptical RaceFace CINCH Hyperglide+ Direct Mount Mountain Chainrings Direct Mount Chainrings UPC: 810006800630
Mpn: OVAL-RFC30-BST-SH12by Wolf Tooth
—$64.95
The Wolf Tooth 64 BCD Universal Chainring is the perfect solution when you need something smaller than a 30t on your 104/64 BCD cranks or your 11-speed Shimano XT and SLX 96/64 BCD cranks. Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention For use with 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Chainline is 46mm on a triple and 48mm on a double crank Chainline on a standard M8000 or M7000 crankset is 48mm and 50mm on a boost version Item Specifications Chainring BCD 64 Color Black Defined Color Black Drivetrain Speeds 10 Drivetrain Speeds 11 Drivetrain Speeds 12 Drivetrain Speeds 9 Material Aluminum Ring Position/Type Chain Retaining Single Ring Ring Position/Type Inner Tooth Count 26 Wolf Tooth 64 BCD Chainrings Chainring UPC: 812719025911
Mpn: 6426-UNVSLby Wolf Tooth
© 2024 Worldwide Cyclery