—$39.95
Bearing-size specific cartridge bearing removal tool. Individual extractor for removing 6002, 6702, 6802, 6902, 15268 & 15267 sealed bearings Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing Tap the extractor out with a punch Wheels Manufacturing Bearing Extractor Bearing Tool UPC: 836572002933
Mpn: 6002-EXTby Wheels Manufacturing
—$39.99
Bearing-size specific cartridge bearing removal tool. Individual extractor for removing 6000, 6200, 6800 & 6900 sealed bearings Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing Tap the extractor out with a punch Wheels Manufacturing Bearing Extractor Bearing Tool UPC: 836572002704
Mpn: 6000-EXTby Wheels Manufacturing
—$13.30
Press adaptors for sealed bearing installation press. Compatible with PRESS-1 or PRESS-4 handles Sold individually Inner hole sized to fit 3/8" ACME threaded rod Sold individually (2 drifts required for some installations) Wheels Manufacturing Press Adaptors Bearing Tool UPC: 836572009093
Mpn: 6902OBby Wheels Manufacturing
—$38.99
Double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. Machined aluminum Anodized red Wheels Manufacturing Bottom Bracket Wrench Bottom Bracket Tool UPC: 811079023759
Mpn: WRENCH-BB48-44by Wheels Manufacturing
—$39.99
Bearing-size specific cartridge bearing removal tool. Individual extractor for removing 6001, 6801 & 6901 sealed bearings Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing Tap the extractor out with a punch Wheels Manufacturing Bearing Extractor Bearing Tool UPC: 836572002902
Mpn: 6001-EXTby Wheels Manufacturing
—$39.99
Bearing-size specific cartridge bearing removal tool. Individual extractor for removing 6003, 6803, 6903 & 17287 sealed bearings Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing Tap the extractor out with a punch Wheels Manufacturing Bearing Extractor Bearing Tool UPC: 836572004418
Mpn: 6003-EXTby Wheels Manufacturing
—$84
Professional, shop-quality installation bearing press tools machined for precision fit. Wheels Manufacturing Bearing Press Bearing Tool UPC: 811079023117
Mpn: PRESS-7by Wheels Manufacturing
—$62.99
Double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. Double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups Compatible with all Wheels Manufacturing bottom brackets Socket is machined for 1/2" drive, but a 3/8" to 1/2" adaptor is included so you can use it with 3/8" drive torque wrenches 48.5mm, 16-notch pattern matches up with Wheels Mfg bottom brackets, along with some FSA MegaEVO bottom brackets 44mm, 16-notch side matches up with Wheels Manufacturing bottom brackets, along with many other outboard bearing bottom brackets including Shimano, FSA MegaEXO and SRAM/Truvativ Machined aluminum Anodized red Wheels Manufacturing Bottom Bracket Wrench Bottom Bracket Tool UPC: 811079024558
Mpn: BBTOOL-48-44by Wheels Manufacturing
—$13.30
Press adaptors for sealed bearing installation press. Compatible with PRESS-1 or PRESS-4 handles Sold individually Inner hole sized to fit 3/8" ACME threaded rod Sold individually (2 drifts required for some installations) Wheels Manufacturing Press Adaptors Bearing Tool UPC: 836572009109
Mpn: 6903OBby Wheels Manufacturing
—$13.30
Press adaptors for sealed bearing installation press. Open bore adaptor for installing PF30-OUT-29MM bottom bracket cups and 29x42 sealed bearings. 1/2 thru hole for use with Wheels Manufacturing bottom bracket press tools Compatible with PRESS-7, PRESS-7-PRO or PRESS-9-PRO handles/rod Inner hole sized to fit 3/8" ACME threaded rod Sold individually (2 drifts required for some installations) Wheels Manufacturing Press Adaptors Bearing Tool UPC: 811079025364
Mpn: 29SRAM-OBby Wheels Manufacturing
—$94.50
Professional, shop-quality installation bearing press tools machined for precision fit. Wheels Manufacturing Bottom Bracket Press with large handles and brass inserts in the handle faces Includes two Universal BB Drifts (TL4144) Zinc-plated 1/2" diameter threaded rod Works with BB shells up to 132mm wide Wheels Manufacturing Bearing Press Bearing Tool UPC: 811079023049
Mpn: PRESS-7-PROby Wheels Manufacturing
—$15.75
Precision machined anodized aluminum designed to allow for easy adjustment of the Fox DHX2/FLOAT X2 shocks requiring a 3mm and 6mm hex wrench. This small pocket sized tool allows for easy trail side adjustments. Wheels Manufacturing Suspension Tool Suspension Tool UPC: 811079026606
Mpn: TL9001by Wheels Manufacturing
—$39.99
Bearing-size specific cartridge bearing removal tool. Individual extractor for removing 608 & 688 sealed bearings Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing Tap the extractor out with a punch Wheels Manufacturing Bearing Extractor Bearing Tool UPC: 836572004678
Mpn: 608-EXTby Wheels Manufacturing
—$13.30
Press adaptors for sealed bearing installation press. Compatible with PRESS-1 or PRESS-4 handles Sold individually Inner hole sized to fit 3/8" ACME threaded rod Sold individually (2 drifts required for some installations) Wheels Manufacturing Press Adaptors Bearing Tool UPC: 836572009444
Mpn: 6902OA-7by Wheels Manufacturing
—$41.50
Bearing-size specific cartridge bearing removal tool. Individual extractor for removing 6804 & 6904 sealed bearings Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing Tap the extractor out with a punch Wheels Manufacturing Bearing Extractor Bearing Tool UPC: 836572005033
Mpn: 6804-EXTby Wheels Manufacturing
—$27.50
Drift pack for sealed bearing installation press. Universal bottom bracket drift designed to press all current Wheels Mfg bottom bracket cups into frames Compatible with bearing presses using 1/2" diameter rod Wheels Manufacturing Drift Pack Bearing Tool Bearing Tool UPC: 811079023087
Mpn: BB-OBby Wheels Manufacturing
—$357
Wheels Manufacturing Bearing Tools Bearing sleeves press on bearing OD to avoid bearing damage while installing Fits 6801, 6802, 6803, 6804, 6805, 2437, 6806, 6901, 6902, 6903, 6904, 6000, 6001, 6002 and 6003 bearings Comes with handles, base and each bearing sleeve is laser etched for identification Made in USA Wheels Manufacturing Bearing Press Bearing Tool UPC: 811079026170
Mpn: PRESS-1Aby Wheels Manufacturing
—$41.50
Bearing-size specific cartridge bearing removal tool. Individual extractor for removing 6805 sealed bearing Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing Tap the extractor out with a punch Wheels Manufacturing Bearing Extractor Bearing Tool UPC: 836572005088
Mpn: 6805-EXTby Wheels Manufacturing
—$298.99
The Bearing Press Pro Kit installs 14 bearing sizes including today's most common bottom bracket and thru axle bearings. The kit also includes linkage offsets for full suspension bearing installation and 7 speed spacers for faster installs. All parts are laser etched for easy identification. Wheels Manufacturing Bearing Press Pro Kit Bearing Tool UPC: 811079027030
Mpn: BP0001by Wheels Manufacturing
—$74.99
Essential Bearing Press for installation of bearings with a minimum inner diameter of 10mm For use with 3/8" Press Rod and handles. Wheels Manufacturing Hub Bearing Press Essential Kit Bearing Tool UPC: 811079027078
Mpn: BP0005by Wheels Manufacturing
—$13.30
Press adaptors for sealed bearing installation press. Compatible with PRESS-1 or PRESS-4 handles Sold individually Inner hole sized to fit 3/8" ACME threaded rod Sold individually (2 drifts required for some installations) Wheels Manufacturing Press Adaptors Bearing Tool UPC: 836572009499
Mpn: 6903OA-7by Wheels Manufacturing
—$34.99
Wheels Manufacturing Bushing Removal Tools Fits: 1/2", 10mm & 12mm eyelets Includes bushing drifts and support sleeve with foot Replacement bushings available direct from Wheels Manufacturing Wheels Manufacturing Bushing Removal Tool Suspension Tool UPC: 836572007198
Mpn: TOOL-BUSHby Wheels Manufacturing
—$19.99
The XTR Cap Driver is specifically designed to remove and install the crank arm bolt cap on Shimano-XTR-M9100 series crank arms. Servicing crank arms or removing damaged M9100 crank arm bolts has never been easier. Designed to be used with a 3/8" drive socket or torque wrench for easy installation and removal. 3/8" drive interface Precision machined aluminum Anodized Red Wheels Manufacturing XTR Cap Driver Crank Arm Tool UPC: 811079029577
Mpn: XTR-CAP-DRIVERby Wheels Manufacturing
—$34.99
Bearing extractors set for pushing out sealed bearings from bottom bracket cups. Compatible with our 1/2" threaded press rod and handles.Sealed bearing extractor for 29mm ID bearings. Extractor has 1/2" thru hole for use with our 1/2" threaded rod press handles. Wheels Manufacturing Bottom Bracket Sealed Bearing Extractor Set Bearing Tool UPC: 811079025586
Mpn: BE-29MM-SETby Wheels Manufacturing
—$325
Wheels Manufacturing Bearing Tools Fits 6801, 6802, 6803, 6804, 6805, 2437, 6806, 6901, 6902, 6903, 6904, 6000,6001, 6002 and 6003 bearings Expanding collet design grips bearing inner diameter Made in USA Wheels Manufacturing Sealed Bearing Extractor Set Bearing Tool UPC: 836572007679
Mpn: PRESS-5by Wheels Manufacturing
—$186.99
The Headset Press Pro Install Kit is a robust, and easy to use tool. The kit includes a machined aluminum handle, 1/2" threaded rod, two machined aluminum drifts and the Adjustable Press Stop allowing for easy drift placement. One drift is machined with multiple steps to fit common head tube inner diameters listed in the Compatibility tab below. The other drift has two sizes to press in cups with either 1-1/8" or 1-1/2" bearings. Originally Press-8 Machined aluminum handle and drifts Red anodized drifts and handles Zinc-plated 1/2" diameter threaded rod Long threaded rod works with long head tubes up to 250mm Wheels Manufacturing Headset Press Pro Install Kit Headset Tool UPC: 811079027108
Mpn: BP0008by Wheels Manufacturing
—$44.99
Thin Flange Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. Compatible with all Wheels Manufacturing (Some FSA MegaEVO) bottom brackets that have the following spline patterns: 48.5mm, 16-notch, 1/2 UNC threaded Press Rod 3/8" drive can be used to allow torque wrench Machined 6061 Aluminum Wheels Manufacturing Thin Flange Bottom Bracket Socket Bottom Bracket Tool UPC: 811079027221
Mpn: BP0018by Wheels Manufacturing
—$23.63
Bearing extractors set for pushing out sealed bearings from bottom bracket cups. Compatible with our 1/2" threaded press rod and handles.Receiver cup sleeve for Wheels Mfg sealed bearing extractors. Machined aluminum sleeve, anodized red with 44mm ID and 52mm OD. 1/2" thru hole to fit over our 1/2" threaded rod press handles. Wheels Manufacturing Bottom Bracket Sealed Bearing Extractor Set Bearing Tool UPC: 811079024954
Mpn: SLEEVE-44by Wheels Manufacturing
—$21
The XTR Crank Socket is used for installing and removing lockrings on Shimano direct-mount chainring crankarms. Precision machined 6061 aluminum Anodized Red Wheels Manufacturing XTR Crank Socket Crank Arm Tool UPC: 811079029959
Mpn: XTR-CNK-SOCKETby Wheels Manufacturing
—$31.99
The Wheels MFG Centerlock Socket is designed to create a tight grip on a standard 44mm Centerlock Rotor Lockring to avoid slipping while torquing lockrings onto Centerlock Hubs. Designed to be used with a 3/8" drive socket or torque wrench for easy installation and removal. The socket can also be used with 3/8" ACME threaded press rods and adjustable press stop mini to prevent slipping. (Not Included). Precision machined 6061 aluminum Anodized red 3/8" drive interface Wheels Manufacturing Centerlock Socket Tool Other Hub Tool UPC: 811079029553
Mpn: CL-SOCKETby Wheels Manufacturing
—$203.99
This drift and over axle set is used to install common-sized thru-axle hub and frame sealed bearings. Originally Press-3 & Drift Set Hub 1 Compatible with the 3/8 Wheels Mfg. BP0001, BP0005, Press 1 handles and rod Originally Driftset-Hub1 - Press-3 Wheels Manufacturing Bearing Drift Set Essential Kit Bearing Tool UPC: 811079027054
Mpn: BP0003by Wheels Manufacturing
—$58.99
The Adjustable Press Stop slides along 1/2" UNC threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings. Compatible with Wheels Manufacturing press kits: BP0006, BP0007, BP0008, Press-7, Press-7-Pro, Press-8, and Press-9-Pro Machined aluminum body, anodized red Durable steel button For use with 1/2" UNC threaded press rod Wheels Manufacturing Adjustable Press Stop Bearing Tool UPC: 811079027023
Mpn: BP0009by Wheels Manufacturing
—$54.99
Similar to its big brother but at a fraction of the size. The new and more efficient Adjustable Press Stop Mini will make life easier for mechanics as it allows for quick and accurate positioning in places where space is tight at the press of a button. The Adjustable Press Stop slides along 3/8" ACME threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings. Machined aluminum body Anodized in Wheels MFG red Durable steel button For use with 3/8" ACME threaded press rod (Sold Separately) Wheels Manufacturing Adjustable Press Stop Mini Bearing Tool UPC: 811079027313
Mpn: BP0022by Wheels Manufacturing
—$159.99
These extractors remove sealed bearings with inside diameters from 8, 9, 10 ,and 12mm. Bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer. Originally Press-5 Removes these sealed bearing sizes: 608, 609, 6000, 6001 Wheels Manufacturing Sealed Bearing Extractor Set for Hub Bearings Essential Kit Bearing Tool UPC: 811079027122
Mpn: EX0001by Wheels Manufacturing
—$124.99
Designed to press in all current Wheels Mfg bottom brackets! Our do-it-all Essential Bottom Bracket Press. Economical and easy to use, this tool is made up of two machined aluminum handles, 1/2" threaded rod and one machined aluminum frame drift. 1/2" diameter threaded rod resists bending, allowing for the cups to align and press in straight. Drifts can also can be used as a frame bottom bracket shell sizing guide! Machined aluminum handles and drifts Red anodized drifts and handles Steps on drift are marked with diameter sizes Zinc-plated 1/2" diameter threaded rod Works with BB shells up to 132mm wide Includes one frame drift. 6802/29 OB 1/2" x 2 22x37 Drift 1/2" x 2 6806 OB 1/2" x 2 24x37 OB 1/2" x 2 1/2" Frame Drift 1/2-13 x 9.7" Threaded Rod UNC Originally Press-7 Wheels Manufacturing Bottom Bracket Press Essential Kit Bearing Tool UPC: 811079027085
Mpn: BP0006by Wheels Manufacturing
—$19.43
Our universal bottom bracket frame drift is designed to press all current Wheels Mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters, each step is laser etched with the diameter size. Inner hole sized to fit 1/2" threaded rod. Not for use with our PRESS-1 or PRESS-4 Compatible with any other press with a 1/2" diameter rod Recommended for use with Wheels Mfg BP0006, BP0007 Machined aluminum Anodized Red Sold individually Wheels Manufacturing Bottom Bracket Frame Drift Bearing Tool UPC: 811079027160
Mpn: BP0013by Wheels Manufacturing
—$29.99
Precision machined anodized aluminum designed to allow for easy installation, removal or adjustments of the Shimano Hollowtech II Crankset compression bolt. Wheels Manufacturing Preload Tool Crank Arm Tool UPC: 811079026590
Mpn: TL9000by Wheels Manufacturing
—$210.99
Complete tool kit for installing Wheels Manufacturing bottom brackets. Kit includes our new bottom bracket socket tool for installing our BB cups, along with new sealed bearing drifts. Bearing drifts fit I.D. bearings: 22mm, 24mm, 29mm, 30mm Originally Press-9-Pro Wheels Manufacturing Bottom Bracket Press Pro Install Kit Bearing Tool UPC: 811079027092
Mpn: BP0007by Wheels Manufacturing
—$13.30
Open bore bearing drifts used to press sealed bearings into bottom bracket cups. Installs: 24x37 bearing Inner Step Outer Diameter: 23.8mm Outer Diameter: 36.8mm Thru Hole Diameter: 0.387" (9.8mm) Inner hole sized to fit 1/2" threaded rod Compatible with BP0006, BP0007 Machined, red anodized aluminum Sold individually (2 drifts required for some installations) Wheels Manufacturing Open Bore Drift Bearing Tool UPC: 811079027184
Mpn: BP0015by Wheels Manufacturing
—$66.99
Precision machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components specifically bike dropper seat posts during service. Designed with strong magnet inserts to keep the shaft clamps securely in place when used with a vice clamp.Includes 1 pairs of of shaft clamps to fit shaft diameters: 30.9, 31.6, and 34.9mm Wheels Manufacturing Vice Shaft Clamp Set Suspension Tool UPC: 810124710972
Mpn: ST0007by Wheels Manufacturing
—$39.99
Individual extractor for removing 6806 sealed bearings with 29mm inside diameter. Wheels Manufacturing 29mm-EXT Sealed Bearing Extractor Bottom Bracket Tool UPC: 811079027610
Mpn: 29MM-EXTby Wheels Manufacturing
—$169.99
These extractors remove sealed bearings with inside diameters from 22, 24, 29, and 30mm. Bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component. Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing. Tap the extractor & bearing out together with a punch and hammer.Removes these sealed bearing sizes: 6806, 24x37, 29DUB, GXP22 Wheels Manufacturing Sealed Bearing Extractor Set for Bottom Brackets Essential Kit Bearing Tool UPC: 811079027146
Mpn: EX0003by Wheels Manufacturing
—$114.99
An evolution of our original bushing toolset which required the use of a hammer to pound out shock bushings. The new design uses our threaded handle press system to easily and efficiently remove shock bushing in 12mm and 1/2 inch sizes. Wheels Manufacturing Shock Bushing Press Kit Suspension Tool UPC: 811079026804
Mpn: ST0006by Wheels Manufacturing
—$228.99
Precision machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed by Barnett Bicycle Institute and manufactured by Wheels Manufacturing. Kit includes 3 pairs of of shaft clamps to fit 15 shaft diameters from 8mm to 28.6mm Ideal for Suspension damper shafts, damper cylinders, air-spring cylinders, piston shafts and thru-axles Wheels Manufacturing BBI Shaft Clamp Suspension Tool UPC: 811079026767
Mpn: ST0005by Wheels Manufacturing
—$44.99
Thin Flange Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. Compatible with all Wheels Manufacturing (SRAM T47) bottom brackets that have the following spline patterns: 52mm, 16-notch 1/2 UNC threaded Press Rod Machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached Locks onto 1/2 inch UNC press rod Machined 6061 aluminum Anodized red Wheels Manufacturing Thin Flange Bottom Bracket Socket Bottom Bracket Tool UPC: 811079027252
Mpn: BP0019by Wheels Manufacturing
—$196.99
This drift and over axle set is used to install less common-sized thru-axle and frame sealed bearings. Originally DriftsetHub1 Compatible with the 3/8 Wheels Mfg. BP0001, BP0005, Press 1 handles and rod Originally Driftset-Hub1 Wheels Manufacturing Bearing Drift Set Support Kit Bearing Tool UPC: 811079027061
Mpn: BP0004by Wheels Manufacturing
—$13.30
Open bore bearing drifts used to press sealed bearings into bottom bracket cups. Installs: 22X37 (GXP) bearing Inner Step Outer Diameter: 21.9mm Outer Diameter: 36.8mm Thickness: 7mm Thru Hole Diameter: 0.387" (9.8mm) Inner hole sized to fit 1/2" ACME threaded rod Compatible with BP0006, BP0007 Machined, red anodized aluminum Sold individually Wheels Manufacturing Open Bore Drift Bearing Tool UPC: 811079027177
Mpn: BP0014by Wheels Manufacturing
—$13.30
Open bore bearing drifts used to press sealed bearings into bottom bracket cups. Installs: 6806 bearing Inner Step Outer Diameter: 29.9mm Outer Diameter: 41.8mm Thickness: 7mm Thru Hole Diameter: 0.387" (9.8mm) Inner hole sized to fit 1/2" threaded rod Compatible BP0006, BP0007 Machined, red anodized aluminum Sold individually (2 drifts required for some installations) Wheels Manufacturing Open Bore Drift Bearing Tool UPC: 811079027207
Mpn: BP0017by Wheels Manufacturing
—$44.99
Thin Flange Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. Single-sided socket is used for installing and removing 44mm, 16-notch bottom bracket cups Allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch UNC press rod 6061 Aluminum, anodized red Wheels Manufacturing Thin Flange Bottom Bracket Socket Bottom Bracket Tool UPC: 810124711306
Mpn: BP0023by Wheels Manufacturing
—$34.35
Wheels Manufacturing Bafang Ebike Cassette Removal Tool Other Hub Tool
Mpn:by Wheels Manufacturing
© 2024 Worldwide Cyclery